image_processing20200801-32326-vyr5yj.jpeg
Thumb 0
Thumb 1
Thumb 2
Thumb 3
Thumb 4
Thumb 5
Thumb 6

Replacement step stool rubber foot 3d μοντέλο

Ideally you want to print this with a flexible PLA filament so that it will provide the same cushioning as the original rubber part. I used the following settings on my Printbot+: Extruder: 205 deg. Bed: 85 deg. with ABS-juice coated blue tape 0.5 mm. extruder nozzle 33% infill 0.3 mm. layer height Cooling on constant after 1st 1.0 mm. Print SLOWLY! Mine takes about 15 minutes per copy. When done, just push the foot into the tubing and hey presto, good as new. And a big shout-out to LucidOne for his excellent and elegant curve forming code here: http://www.thingiverse.com/thing:6455/#files. That made my job a lot easier.
Δημοσιεύθηκε από:
Creazilla
Πηγή: Michele31415 on Myminifactory

Loading...

11 λήψεις
ΜορφήSTL
Size20 x 20 x 18.1
Print ReadyΝαι
εκτύπωσηstl αξεσουάρhouseholdπατάκιhome improvement

ΠΕΡΙΣΣΟΤΕΡΑ ΣΑΝ ΑΥΤΟ

Creazilla logo
Πάνω από 10 εκατομμύρια+ δωρεάν γραφικοί πόροι για δημιουργούς περιεχομένου και σχεδιαστές
© 2018 - 2025 Creazilla
Οι πόροι μαςΌλες οι εικόνεςΦωτογραφίεςΨηφιακές εικονογραφήσειςΚλίπαρτΕικονίδιαΕικόνες PNGEmojisΣιλουέτεςΠαραδοσιακή τέχνη3D μοντέλαΔιανύσματαΓραμματοσειρέςΟνόματα χρωμάτωνΠαλέτες χρωμάτωνΔιαβαθμίσεις χρωμάτωνΉχοςΚινούμενα σχέδιαΒίντεοΠρότυπα
ΠληροφορίεςΣχετικά με την CreazillaΌροι ΧρήσηςTech teamPrivacy policyLicence Information
ΑνατροφοδότησηContact Us