image_processing20200801-1307-6olks7.jpeg
Thumb 0
Thumb 1
Thumb 2
Thumb 3
Thumb 4
Thumb 5
Thumb 6

Double Stack Speed Loader 3d μοντέλο

Support Removal There is a support upright for the cartridge follower compressor tab. There are also thin connections from the support and compressor tab to the speed loader frame. Cut the thin connections to the frame and break the upright support free. The support piece will break about 18 mm (almost 3/4") down from the top of the loader. Run an exacto or thin blade between the frame and the follower compressor tab (the protrusion). If needed, clear between the tab and the frame to nearly 25mm from the roof of the inside top of the loader. You may not need more trimming depending on your printer. Magazine clearance behind tab.
Δημοσιεύθηκε από:
Creazilla
Πηγή: Brian Stott on Myminifactory

Loading...

24 λήψεις
ΜορφήSTL
Size40.92 x 40.92 x 52.63
Print ReadyΝαι
εργαλείαεκτύπωσηstl αξεσουάρπεριοδικό

ΠΕΡΙΣΣΟΤΕΡΑ ΣΑΝ ΑΥΤΟ

Creazilla logo
Πάνω από 10 εκατομμύρια+ δωρεάν γραφικοί πόροι για δημιουργούς περιεχομένου και σχεδιαστές
© 2018 - 2025 Creazilla
Οι πόροι μαςΌλες οι εικόνεςΦωτογραφίεςΨηφιακές εικονογραφήσειςΚλίπαρτΕικονίδιαΕικόνες PNGEmojisΣιλουέτεςΠαραδοσιακή τέχνη3D μοντέλαΔιανύσματαΓραμματοσειρέςΟνόματα χρωμάτωνΠαλέτες χρωμάτωνΔιαβαθμίσεις χρωμάτωνΉχοςΚινούμενα σχέδιαΒίντεοΠρότυπα
ΠληροφορίεςΣχετικά με την CreazillaΌροι ΧρήσηςTech teamPrivacy policyLicence Information
ΑνατροφοδότησηContact Us