image_processing20200801-547-x64pyw.jpeg
Thumb 0
Thumb 1
Thumb 2

Spool Holder and Filament Separator 3d μοντέλο

The gcode files are what I printed on a standard Prusa i3 mk3 kit using Prusa’s supplied PLA plastic with almost everything left at the default settings in Slic3r Prusa Edition (v1.40.1 win64 edition). My Spool Holder print was done with 10% rectilinear infill, 2 perimeters, and an overall height of 15mm to help keep it from breaking/bending/falling off (which is why there's the square hole in the top above where you attach it to the wood and the attachment to the wood is wider than the spool holder part). I wasn't really trying to do this, but the support triangles of the infill tended to be almost exactly where I would have put them (right at the boundaries between the support beams and the main object). It took 78 minutes and 15 grams/5m of filament (assuming standard PLA density of 1.25 g/cm^3)... which is only 3% more than if I printed with 3 perimeters and 0% infill. The filament guide was done with 0% infill and 2 perimeters. It is designed to be printed at a height of 4 mm, but if you want to get rid of wobbling, increase the height as needed in your slicer software (or print two and bond them together using heat/positioning in the slicer software). It took 28 minutes and 3.9 grams/1.3m of filament (assuming standard PLA density of 1.25 g/cm^3).
Δημοσιεύθηκε από:
Creazilla
Πηγή: Thomas Gauthier on Myminifactory

Loading...

21 λήψεις
ΜορφήSTL
Print ReadyΝαι
εκτύπωσηstl βιομηχανίαοδηγόςholder3d printer parts

ΠΕΡΙΣΣΟΤΕΡΑ ΣΑΝ ΑΥΤΟ

Creazilla logo
Πάνω από 10 εκατομμύρια+ δωρεάν γραφικοί πόροι για δημιουργούς περιεχομένου και σχεδιαστές
© 2018 - 2025 Creazilla
Οι πόροι μαςΌλες οι εικόνεςΦωτογραφίεςΨηφιακές εικονογραφήσειςΚλίπαρτΕικονίδιαΕικόνες PNGEmojisΣιλουέτεςΠαραδοσιακή τέχνη3D μοντέλαΔιανύσματαΓραμματοσειρέςΟνόματα χρωμάτωνΠαλέτες χρωμάτωνΔιαβαθμίσεις χρωμάτωνΉχοςΚινούμενα σχέδιαΒίντεοΠρότυπα
ΠληροφορίεςΣχετικά με την CreazillaΌροι ΧρήσηςTech teamPrivacy policyLicence Information
ΑνατροφοδότησηContact Us