1 517 pistes audio libres de droits pour "Outil"

I grabbed a metal mallet (mini sledgehammer) and dropped in on cement in various ways. Lightly and a bit harder. Recorded into my ntg3 in a garage sectioned off. Signal to noise ratio was really good because it was a loud sound. H5 was my recorded. Cleaned some hum using rx4. Boom!. Pretty please, post a link if you use this file. I'm excited to see what you can do with this!. Text me if you want to have fun and talk gear. I love hearing what people are up to!702-860-9869.

Sound of a socket wrench pivoting back.

A quartz crystal rod scraped against a steel cup-like object to create the sound of a crystal being inserted into a socket.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Recorder: tascam dr-60d mkiimicrophone: sennheiser me66.

A 6-in-1 brass hammer being dismantled and put back together. I am aware that there are a few "pops" in the sound, but i am not completely sure how to remove them, so i left them there in case someone with more experience in audio editing wants them. The sounds i recorded from the smallest possible parts of the hammer are not included because they were way too quiet to be useful :1.

Someone welding part of a car. Senn 416 > sound devices 302 > tascam dr-40 48khz 24bit.

Poking around in my grandmother's barn - building is approx 140 years old and filled with old tools, furniture and other random things. Recording consists of a lot of rusty metal scrapes and thumps, footsteps on old wood, doors etc. Recorded on a hand-held sony pcm-d50. I've edited out the worst of the wind and other artifacts of my sloppy recording technique, but there may be some still in there.

The sound of me twisting the end of a pen of novolog insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

The sound of me twisting the end of a pen of lantus insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

Arboga belt grinder turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Full machine cycle of an unbranded air compressor turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Gas bottle (20 kg) hit with a hose coupler once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded impact wrench started four times against a bench. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded needlegun scaler started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Ingersoll rand riveting hammer started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded straight die grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Spinning a cordless, brushless drill (check empty, no load speeds) at various bursts of different length. Some in 1st gear and some in 2nd gear; in 2nd gear the electric brake is more pronounced. Mic changes position now and again to vary the sound character.

A somewhat large drill powering up and losing power.

A jackhammer backed with a vacuum pulsing against asphalt pavement.

A jackhammer backed with a vacuum working its way through asphalt pavement from a medium distance.

Hitting a metal hammer on a metal big nail thing, i fail to figure out the correct word for the tool being hit here. Extracted from a video (http://img. Youtube. Com/vi/ibovrwev2q0/2. Jpg) by a us government agency, thus public domain. Find many more military sounds in my military sounds pack, also located on freesound. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

Playing with a bag of screws and dropping them onto a wooden bookshelf.

Sound of a closing wooden garage door.

Sound of screws being moved around.

Sound of a drawer being open from a red toolbox.

Sound of a screw being dropped on metal.

Cutting wood part with electric metal saw.

Just tapping things around my desk with a screwdriver and jingling the loose change inside a glass jar. I had the mind to use all of the sounds in this file for a kick/snare/hi hat drum rack in ableton live - hence the ranges of frequency from low (jar thumps) to textured highs (loose change) and high (taps. ) i hope these come in handy, please enjoy! - vanszi. Bandcamp - https://www. Vnzi. Bandcamp. Comspotify - https://open. Spotify. Com/artist/0mzsotvcahcvlcqwo9qndgsoundcloud - https://www. Soundcloud. Com/vanszi.

Squeezing a staple gun.

Cutting a tile of wooden flooring with a handheld circular saw.

Cutting a tile of wooden flooring with a handheld circular saw. Recorded in cluj, romania.

Impact wrench working in the open air :). Recorded witch lenovo p2 smartphone.

Sound of a bosch screwdriver recorded with a bm-8000 mic, edited on audacity.

Dragging a screewdriver on a metalspring, mounted on a tablelamp. Recorde with zoom h1.

Hitting chopsticks together at different time intervals.

Rippling sound from a metal vent that has rhythm of gear movement.

Wameta tig 1600 started. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

This is the sound of an electric knife sharpener sharpening a knife. Recorded with a sony pcm-d100 in stereo.

Tools traffic subway platform start to leave china.

A few sounds of using a normal metal screw-clamp. The sound has been close mic-ed. Recording equipment: akg c214 / focusrite saffire pro 24.

Sounds of using a power saw and increasing the amplitude and speed of the blade.

Rake tool on my garden.

Rake tool on my garden.

Using a drill to put a screw into wood with screw resisting at the end.

This sound has been made with 2 hits on a lift door recorded close with a km185.

Sounds from a construction. (took some sounds from freesound. Org and put them together, hope you like this).

An astronomical clock recorded close-up. I converted this recording from. Flac, compressed, eq'd, and made it loop-ready for you. Original sound:http://freesound. Org/people/vurca/sounds/315753/. .

Desoutter pneumatic drill going through metal, short. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Atlas copco r4n pneumatic hammer started four times and it sounds mellow. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.