390 file audio bebas royalti untuk "Mode"

Rain in brittany on a windy winter day. I built this sound by mixing several field recordings made on the same spot: a small wood in the south of the region. These recordings had different focuses: some were more wind-oriented, others had more rain. . . Instead of publishing these individual takes, i chose to mix them in order to create a soundscape that would vary in density, depth and spacing. Recorded with a zoom h2n in x/y stereo mode. Mixed in nuendo 2. Mastered in sound forge 8.

An eastern-european musician playing guitar in a paris subway train. I was on my way to downtown paris when this guy started singing for money. I chose to record the scene because i thought this was a typical parisian soundscape, something parisian subway users experiment every day, and a real insight on how this city actually sounds. I happened to be sitting in one of these new line 5 trains. I think theyre audio footprint is much smoother than the old trains. . . Recorded with a zoom h2n in x/y stereo mode.

Front l+r channels. A passing thunderstorm and dripping rain recorded on march 8th, 2009 at deer grove forest preserve near palatine, illinois. The recording is slightly edited to prevent it from being too long. The recorder was placed under a picnic area roof, so the water is dripping from that. I think you can almost hear the storm passing from approximately right to left. Recorded using a (slightly wet) zoom h2 in 4 channel surround mode. Please see also the rear l+r channels of this 4 channel recording.

Rear l+r channels. A passing thunderstorm and dripping rain recorded on march 8th, 2009 at deer grove forest preserve near palatine, illinois. The recording is slightly edited to prevent it from being too long. The recorder was placed under a picnic area roof, so the water is dripping from that. I think you can almost hear the storm passing from approximately right to left. Recorded using a (slightly wet) zoom h2 in 4 channel surround mode. Please see also the front l+r channels of this 4 channel recording.

It becomes clear when i record with audacity and can actually see the attack and decay. I’m playing with alm pip slope. With this module you can cv control the attack and decay. As oscillator i use intellijel μvcf in self-oscillation mode. I fm-modulate this filter/oscillator with a tone from uoki-toki polivoks vcf. The semi random trigger is really two triggers connected to an or gate. Pitch is from analogue systems rs-40 (sample/hold and noise). I can listen to this for a looong time. Retro sound.

The ambiance of the famous strasbourg christmas market, known as one of the oldest in the world (first edition took place in 1570) and the city's biggest touristic event, gathering thousands of people downtown for one month at the end of every year. I took my zoom h2n in different places, capturing a slightly different mood each time. Expect lots of crowd sounds, background music, street atmosphere and. . . A lot of different languages (french, german, spanish, english. . . . All recordings made in ms stereo mode (120° setting).

Actually is not rain. It is snow melting down from a roof, falling into puddles and onto a corrugated roof. I placed the microphone (zoom h2) on different spots in 4channel sorround mode. I just normalized them and mixed them into stereo. Thats it. In this case the mic is placed on the ground in the middle of the puddles and the roof. Feel free to vote and leave a comment, maybe letting me know how you are going to use it :). You can easily loop the sound without a notable cut in the mix. Cheers, pillo.

A recording made, midday, on thursday december 8 2022 of a light, but very cold rain hitting the bare trees and the wet, brown leaves on the ground in a midwestern usa forest. Towards the end you'll be treated to a group of blue jays making a huge racket!other than that, no animal sounds at all. Just the slow, steady tip tip tap smack of raindrops falling from a cold-steel and gray sky. Recording made with sound devices mixpre-3 series ii, in 32 bit float mode. Left microphone- deity s mic 2sright microphone- sennheiser mkh 8020.

Recorded in june 2016 on a hudson yards-bound 7 train in the new york city subway. Towards the end of the recording, at the last stop (34th street–hudson yards), there is mta thank you announcement at the station and for all passengers to alight - i have extracted this announcement as a separate audio download on freesound if that's the sound clip you're interested in!. Recorded with a zoom h2n in 4-channel mode - this is the xy recording only (msg me if you want the raw ms recording!), without a windshield. File has not been modified.

Field-recording of the creek found in old ellicot city, md. The creek is located in a suburban town, and is surrounded by a man-made rock moat about a story below street level. Recorded using a sony pcm-m10 at 24bit, 96k. The sound has been gently processed!!- hpf (6db slope) to remove rumble- compressor (ni supercharger gtx) with a minimal 1db gain reduction in m/s mode and a bit of warmth added. - ozone 5 for a little m/s eq to alleviate some of the watery pops on the sides and a little stereo widening to compensate for the pcm-m10's built in omni mics.

Inserting, reading, launching a program, and ejecting a dvd-r in a usb disc drive (repackaged "hp dvdram gu90n" laptop drive) with the occasional rumble of a 2tb 7200rpm internal hard drive (in an enclosure) and mouse clicks. Computer fan may be audible in background. Contains seek noises. Recorded on blue yeti in omnidirectional mode and denoised in rx 8 (drive whine re-enhanced though as noise removal made it quieter). Labels added to audio in fl studio edison.

Two contact microphones recording an engine from a mini cooper s in sport mode. Surprisingly aggressive-sounding. Intended to use for a race car asset. Contact microphones are stethoscope-like mics that you place onto a surface to record vibrations. This way, i was able to record the raw engine without wind or perspective. The left channel is the chassis and the right is the engine block. . . Blending the two together produces a great sound. Free to use.

It's a recording of over 100 people watching a football match (poland-greece @ uefa euro 2012). Recorded in a medium-sized hall. You can hear the sport live commentary broadcasted from television, people expressing their emotions with their voices. Clapping their hands, cheering their team (poland) and generally making a lot of interesting noises as they watch the game. Recorded with zoom h2 in 2-channel surround mode. Originally 24-bit wav, normalized and converted to 24-bit flac with audacity. I have reduced the mic gain at 0:56 to ensure i will not have a clipped recording. I didn't edit the result to let you cut-out whatever you may need.

In broekhuizen, near arcen, lies the old ferry named grubbenvorst, dying on the river maas. It has been replaced by a newer one. The old one lies rotting away some hundred metres away from its old trajectory. It was very windy that day and the carcass of the ship was mildly rocking back and forth resulting in this beautiful creaking. The occasional thud is the boat hitting the construction it is lying in. This recording was made with a zoom h2n on 4 channel mode. It was then further edited and processed using reaper. It was recorded on april 3rd 2018. The zoom was protected by a rycote windshield and my own cap as an extra windbreaker.

Sparrows flying from branch to branch in a bare rose bush. Unintentional capture of sound as i was just out walking testing new equipment. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

One explosion sound i created using wavepad sound editor, adobe audition 3 and my high quality microphone. Sounds used to get this explosion, in case you want to replicate it;. -kicked rocks (recorded by me)-throwing rocks from a distance (recorded by me)-edited and stretched beer hiss (recorded by me)-edited chambagne pop sound (recorded by me)-rocket hiss (replica by me). Applied effects;. Mastering (in adobe audition 3), increased "exciter" up to 11. 5%. High-pass filter (in adobe audition 3). Stretch (in adobe audition 3), in "high precision" mode. Reverb (in wavepad sound editor pro). The sound sounds very common, because most people use this method. In case you want to use it, please give me credits.

A short recording of construction work on a ten-storey apartment building in the blackhorse road area of walthamstow, london. General construction noises. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is some processing to this recording to ‘normalize’ the levels and light eq-ing. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

Underhood recording of my renault 19 with oldish carburetted cleon engine (c2j). Double barrel webber 32 drt carb ~72ps engine. Start engine, tire skid, hard acceleration up to 6000 rpm and coast down to idle, several times. Throttle blips up to 7000 rpm. Mic: sony ecm-ds30p stereorecorder: sony mz-n707 mini disc, sp mode, agc: off. Wanted to test this cheap mic and custom made windscreen - this is my first car recording, and that's why i started with this cheap microphone, don't want to learn on expensive stuff. Still, i'm amazed how the recording turned out, it's $24 mic in not very silent area, yet it captured sound rather nicely. Windscreen (cost $0) turned out to be not that good :).

Version 2. . . Of https://www. Freesound. Org/people/gis_sweden/sounds/352940/. . . Or maybe version 34. . . . It's not better but a little different. More dynamics. Softer. But still i have the clicks :-/have to work on that. It becomes clear when i record with audacity and can actually see the attack and decay. I’m playing with alm pip slope. With this module you can cv control the attack and decay. As oscillator i use intellijel μvcf in self-oscillation mode. I fm-modulate this filter/oscillator with a tone from uoki-toki polivoks vcf. The semi random trigger is really two triggers connected to an or gate. Pitch is from analogue systems rs-40 (sample/hold and noise). I can listen to this for a looong time. Retro sound.

For a podcast project i needed some coffee related sounds so i recorded our techni-vorm moccamaster, filter coffee machine as it brewed a full pot. Our version has a metallic thermos jug rather than the standard glass jug. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

An unintended recording of me and a passerby walking through very thick and wet mud on the walthamstow marshes. I was out testing new gear and couldn't remove the mics from my rucksack strap to avoid picking up the rustle of my clothing or my occasional heavy breathing. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

A heartbeat sound i created. Fairly consistent through most of it, and then speeds up into heart-attack mode about 30 seconds from the end. To make it, i took a kick-drum sample and a snare-drum sample, and made a pattern of kick-snare, kick-snare, kick-snare, over and over. I then eq'd them to be less distinct and drum-like, added tape saturation to increase the low-end thumping, a small chorus effect and some compression to get rid of the drums' attack. . . Basically just over-processed the hell out of it. Then i used a plugin called wok m-st to get a fake hard-panned stereo effect. My goal was to make it sound like your heartbeat sounds in your ears when you've been running too fast for too long. I think it sounds cool.

This is the recording of an audible pedestrians traffic light in paris, france. These devices are here to help visually impaired people cross the streets in a safe way. They come under the form of a little beige box with a hidden button underneath. You have to push the button to hear the annoucement. You can find them all over the city. The sequence goes as follows: first, an annoucement in french says "red light for pedestrians", followed by the street name, then a jingle goes on, followed by a series of bell-like sounds, signaling a green light. I maed this recording because i needed that particular sound for a show i was working on and couldn't find it on freesound. Recorded with a zoom h2n in stereo m/s mode (set to mono).

A short journey on london overground train from dalston to highbury and islington passing through canonbury. Recording includes ticket barrier noises, doors opening and closing and general announcements. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is some processing to this recording to ‘normalize’ the levels and light eq-ing. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

A walk through ridley road market in dalston, east london. Lots of people chatting and music playing. As with many markets in london there are lots of languages being spoken. You can hear traders calling out what they're selling. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is some processing to this recording to ‘normalize’ the levels and light eq-ing. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

Recording of parakeets being loud in springfield park in easy london at 7:30am in november. This was an unintentional recording as i was testing out some new gear, this meant that i wasn't able to unclip the mics from my rucksack straps and avoid picking up the rustle of my clothes and some breathing. A train and canal boat engines can be heard in the background. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

I just love this deep rich harmonic sound with some phase modulation! i've tried to capture it the last month and half and finally managed it. There's quite a lot of air traffic (planes and helicopters) here in prague - písnice, but most of the helicopters have poor sound. It is bell 407 helicopter ok-alb in black/beige color operated by blue sky service (http://www. Ok-alb. Com/). Flight mode-s code a37a9ea. First it approaches with the deep harmonic sound, then it flies by overhead with a more noisy mid-spectrum sound. Recorded on zoom h4nsp, this time with 4gb sd card which has far lower startup time than 32 gb one (like 12 secs compared to more than a minute). Besides the helicopter itself there are some birds singing, insects buzzing and some rumble from the wind (i didn't manage attach the deadcat windshield so quickly). Basic frequency: ~ 33. 87 hz. Original filename: 160703-000. Wav.

Just me stretching, rubbing and 'twanging' a rubber exercise band. Apologies for the knocking in the first 20 seconds, my upstairs neighbour started moving some furniture. I made this recording for a very specific purpose but i suppose it could be used in an animation or computer game but also for something bondage or kink related?. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

11/29/2018 - burbank, california. Rain, flooding, and mudslides come to california when a sudden storm hit today. Most people got off the freeways quickly and tried to protect their homes from water damage. This recording was recorded with a zoomh4npro (2018) set at 120 degree field-pattern mode. The zoom was placed on a tripod facing out a 3rd floor window into a dead-end alleyway below. This recording is great atmospheric sound. The water can be heard trickling off spanish tile rooftops and dripping from overflowing terracotta pots. From the passing cars on a distant highway, to the occasional cough of a homeless gentleman walking on the street below, this recording is genuine and clean. Imagine adding that sound of a metal garbage can and a shrieking cat in the night! a sound that's great for sleeping or portraying a dark alley in gotham!. Enjoy!. Christopher c. Courter.

I've been recording some sounds for a an upcoming project which led me to recording the underside of the lid of a salad spinner and dangling a small plastic tab on it as it spun. It wasn't my intention but it sounds a bit like an old film projector. You can get some interesting results with this clip by messing a bit with the eq which is what i'll be doing for the finished project. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

Airplane, atr 72 (at72) flying by towards airfield at 300 m altitude. Atr 72 is a plane much like the dh8d, a twin engined propeller plane. Recorded at a quiet location (maybe only some birds). Observing point: 300 m from the side of the flying route (one has to look up about 45 degrees for the plane). Speed: about 250 to 280 km/h. This is the recording as it is, recorded with zoom h2n music-capable voicerecorder. The mode of the voicerecorder was just the good old ordinary left-right stereo recording (xy) not such things as mid-side or 4 channel etc. No compression used. I may have edited out some sudden bird sounds or beeps from the camera but that's of negigible influence on the sound. There is a slight hiss from a row of trees in the distance. Feel free to use. If you're happy with the recording, it only adds to the fun i already had of it.

boo (i got you good) is made in garageband for a thing called victors crypt. I'm currently in a beat 'n bass-mode it appears. Made this drums on a vintage-sounding drum-machine and added some sampled drums for a more vital sounding beat. Wanted a cocky big bass-line and some spooky music box stuff, sci-fi synth and more. It's space and horror meeting groove i guess. Could be perfect for an intro, outro, something spooky and cool, mysterious or whatever you feel like. . . . Let the imagination run wild. Feel free to use it as you like as long as you subscribe to and watch my channel! if you wanna use it in your music and gonna release it, ask me first. Don't wanna see my music copyrighted by someone else of course. Be cool watch and subscribe to victors crypt:https://www. Youtube. Com/channel/uca8o46_wrqzehsdzuwfq3rq. Throw horns, dance & hail satan!.

Shortwave wide-band digital emission recorded on july 15, 2014 at 15:17 utc in am mode using 2 instances of the online remote controllable short-wave receiver located at the amateur radio club etgd at the university of twente the netherlands. Left channel was recorded below the central frequency, at a frequency of 10187khz, right channel was recorded above the central frequency, at 10191khz. This was an experiment to see if selective fading would create stereo effects, as the lower frequency part of the transmission would be heard better in the left channel, and the higher frequency component would be heard better on the right. I used goldwave to put the separate recordings into 2 channels of the same file, after i synched the recordings by ear at 1/16 playback speed using a set of 2 particularly strong lightning static crashes as a guide, trimming off everything that came before the first strike in both original recordings, then inserting silence in the range of a few milliseconds until the stereo separation was as close to zero as i could get it. I wasn't as successful at that as i've been with experiments with voice recordings from simultaneous broadcasts on 2 wavelengths that i haven't posted here.

I tried out some new gear and methods! more mountainside rain! a complete storm from beginning to end with swelling and then waning rainfall, occasional thunder. Ms stereo bar on mic stand projected through open second-floor window, just under the roof eaves. Recorded july 20th during one of the mid-afternoon brief intense storms we can seem to get frequently in the rocky mountain foothills beginning around june. If you were listening and wondering, the direct sound of the thunder is somewhat occluded as i believe the storm was behind the overhanging roof and house from the perspective of the microphone array. The mountainous terrain and other objects in the field reflected some of that thunderclap, as well as the exterior wall of the home, and so this is all a little bit funky. Mid-side stereo recording:large diaphragm condensers mounted on octavia stereo mic mounting bar:akg perception 220 mid (cardiod) (on top, upside-down)akg perception 400 side (in bidirectional mode) (on bottom, facing left)sound devices mixpre-6 preamp+mixer+recorder (ch1+2 paired to ms stereo, gain @ +21db, fader @ unity, balance at mid/side center) w/48vdc phantom power applied, on-board mid-side encoding and monitoring in l+r, 24/96khz stereo recording. Postprocessing:cooledit 2000: edited to excerpt from longer recording. Normalized recording to 0db. Downsampled to 16bit 48khz. Flac: encoded.

My computer starting up and shutting down in a quiet room around 11:30 pm. This thing has a solid-state drive of 120gb that is used to boot up windows 7 pro, and a wd green 500gb hard drive that is used to store nearly all my games, and tons of other large (compilations of) files including my five nights fangame files. This was recorded on the night of 4th september 2022, at 11:30 pm. As i am writing this, it's 11:12 am, monday, 5th september. This is my computer starting up and shutting down. (before you scold me for using a weak-ass computer, here are the specs and goodies). Gigabyte m68m-s2pamd phenom x3 720 2. 8ghz4gb ddr2-667 "unganged mode"gigabyte gp-gstfs31120gntdwd green wd5000aurx-63uy4y0asus radeon hd6570 1gb ddr3corsair vs350 psu 350w~~windows 7 pro~~windows 11 pro 64-bit (updated 9/10/2022). If you use this sound, you don't have to, but it would be nice to write my name in the credits and comment!. Edit - the small growl at the end when the fans stop ain't what you guess it is, it's a fan or the hdd's bearing having been ruined by age and emits this noise when spinning down. Yet i pulled up the gain, so it might not have been noticeable in real life.

[[this sound pack contains 8 sounds total, and this is # 4 of 8. ]]. Note: this sound (as all my sounds on freesound. Org are) is **public domain**. Use it, sell it, do anything and everything with it. No need to credit me. I only hope it's useful for someone! however, i'd love to hear about any projects you use my sounds with!!. Abstract, creepy sounds i recorded after watching this video on hans zimmer's creation of the score to the original dark knight soundtrack:. Https://www. Youtube. Com/watch?v=r-l1rctgtoe. (fascinating video, give it a watch! :d). - i found an old rusty razorblade (if it ain't rusty it ain't emo, amiright? amiright? oh god that's in poor taste)- and just started scraping it over the copper-wound strings of my seagull s6 acoustic guitar in which i've installed an electronic pickup. - recorded into reaper on my mid-2014 macbook pro, via direct in through a zoom h4n in audio-interface mode. Only processing: gentle eq highpass at 95 hz. And some slight gain reduction. These sounds remind me somehow of creepy film scores where the strings do that erratic pizzicato thing that sends tingles up your spine. Tell me what you come up with, i'd love to know!!.

Here are some recordings of some of my basic woodwork tools. I'll try and get better recordings in the future but i share a workshop and it is rarely quiet enough to get good recordings. All recordings are me working on a piece of 25mm thick walnut timber. Listening back has made me realise that all of these tools need sharpening!! :). The recordings are as follows:. 00:00 - 00:26stanley block plane fine shaving the edge of the timber. 00:28 - 01:33stanley 5m retractable tape measure, metal blade and plastic casing. Tape being wound out and drawn back in. 01:36 - 03:30milwaukee m12 battery drill. Trigger being pressed, chuck opening and closing and bits being changed. Drilling into timber. Driving screws into the timber and removing them again. 03:32 - 05:14lie nielsen crosscut tenon saw cutting across the grain of the timber. 05:17 - endgeneral purpose wood saw 'ripping' along the grain of the timber. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

Br-laser vector synthesis reel for make noise morphagene. These sounds have visuals encoded into them at high frequencies. The vector synthesis reel for the make noise morphagene is a collection of different xy samples, to show off morphagene's stereo sampling capability. The sample material can be displayed on oscilloscopes, modified vectrex game consoles, ilda laser displays or oscilloscope simulation software in xy mode. Some splices on the reel can be used as seamless loops. Here is a video to give a basic idea of the reelhttps://youtu. Be/cxxb9veyq6w. The collection of vectors was arranged by bernhard rasinger and includes vector contributions from artists listed below. An important part of this reel is to put the spotlight on working and performing artists utilizing sound signals to draw images as vector art. Alberto novellohttp://www. Jestern. Com. Andrew duffhttp://andrew-duff. Co. Uk/. Bernhard rasingerhttps://www. Br-laser. Com/. Chris kinghttp://videocircuits. Blogspot. Com/. Derek holzerhttp://macumbista. Net/. Douglas nunnhttps://vectorhackfestival. Com/guests/nunn/. Hansi raberhttp://youtube. Com/hansiraber. Ivan marušić klifhttp://i. M. Klif. Tv. Jerobeam fendersonhttp://oscilloscopemusic. Com. Jonas bershttp://jonasbers. Com. Joost rekveldhttp://www. Joostrekveld. Net. Philip baljeuhttp://instagram. Com/pbaljeuhttps://www. Youtube. Com/channel/ucudrl_q3_cnsj0ta2k7saha. Philipp haffnerhttps://www. Instagram. Com/philipp_haffner/. Robert henkehttp://roberthenke. Com/. Roland lionihttp://www. Akirasrebirth. Com. Ted davishttp://teddavis. Org. Vector hack festivalhttps://vectorhackfestival. Com/. All of these artists, working in the vector synthesis realm are creating these vectors with a different set of tools. These tools include pure data, max4live, oscistudio, axoloti, modular synthesizer, video synthesizer. Https://oscilloscopemusic. Com/oscistudio. Phphttp://write. Flossmanuals. Net/pure-data/introduction2/http://www. Axoloti. Com/https://www. Ableton. Com/de/live/max-for-live/. For introductory oscilloscope and technique tutorials please enjoy jerobeam fenderson´s tutorial series. Https://www. Youtube. Com/playlist?list=plfgouhnvmlro45p9uur18wofljeavcfvv.

This is a sci-fi ambient drone sound i made. It's creative commons cc0, so please treat it as public domain. You can use it in any commercial or non-commercial media for free, no restrictions. For those curious how i made this, i took a quick 8-second drum loop from my pocket operator po-33 (ko) and ran it through a free time-stretching/pitch-shifting program called akaizer. The program's based on old samplers like the akai s1000 that had extremely artifact-heavy time-stretching and pitch-shifting features. If you slow a sound down enough, the final product tends to sound harsh and electric. Akaizer turned my 8-second drum loop into 2 minutes and 38 seconds of harsh, bassy noise, pretty damn close to the final. Then i imported the file (we'll call it file a) into reaper, my daw. Track 1 has reaeq with a high-shelf acting like a low-pass. Its curve is set at 1386. 2 hz, gain at -inf, and bandwidth at 2. In retrospect, i have no idea why i didn't use a low-pass. Track 1 has a send to a blank track 2, which has a fab-filter pro-q 3 high-pass filter with a 12db slope. It's at 320. 57hz, q is 1. 096. After the eq, track 2 has valhalla shimmer set to the black hole preset with no changes. Track 3 is the default file a with valhalla shimmer on the black hole setting, but with two tweaks. Low-cut is at 30hz, high-cut is at 6630hz. Everything else is the same. That's followed by fab-filter pro-q 3 with these eq settings:-0. 72db at 69. 463hz, q at 1. 007. -1. 11db at 536. 64hz, q at 1. 013, dynamic eq (click "make dynamic" and leave everything as-is). The point of this dynamic eq is to give a slight drop in gain in the 500hz region, which tends to get muddy in larger mixes. I wasn't sure if i'd use this for a larger project, and i didn't want build-up in that region from the already large-sounding track 1 and 2. The ocassional eq drops here also adds a warble to the final mix that helps sell an analog, electrical sound. +0. 85db at 3697. 3hz, q at 1. 009. This is to add subtle airiness to the drone. It seems weird to have "airiness" in the 3-4k region, but it's the sort of rumbliness of the sound traveling away and dissipating in the atmosphere after the lowest drone sounds. My volume fader settings for all 3 tracks:. Track 1: -8. 59 dbtrack 2: -6. 46 dbtrack 3: -6. 43 db. On my master bus, i have izotope imager 9 with these settings:. Band 1: width at -100 (mono) for 59hz and below. Band 2: nothing at 60hz to 525hz (width at 0). Band 3: width at 48. 1 for 526 to 1. 4khz. Band 4: width at 49. 4 at 1. 4khz and above. Stereoize is set to 6. 4ms on mode i. And that's it! no compressors or limiters anywhere, since i liked how dynamic the actual tracks were and i figure you can always add your own compressor or limiter to the final if you want. I've also added the original po-33 drum loop on my page, as well as the loop after it was run through akaizer but before it hit reaper in case you want to do your own processing. Enjoy :).

Created by divkid for use in the make noise soundhack morphagene. There are dry-only, fx-only, and mix versions of this reel in the pack. See it in action at https://youtu. Be/rk4ufmfcouc. Patch walkthrough. The patch starts with the qu-bit chance providing discrete random values (sample and hold) going into an instruo harmonaig. This takes the stepped random voltages and quantizing them to a given scale. I put in the notes c d eb f g ab bb which is a c natural minor scale, the relative minor of eb major (for anyone that's curious). However like most of my modular work i didn't actually tune the oscillators to anything specific. So treat the scale as a pattern of intervals not a set of specific notes. The quantized notes then form 4 voice chords giving us a root, third, fifth and seventh cv output that will be diatonic following the scale pattern, meaning the third will be major or minor, the seventh major, minor or dominant and the fifth natural or diminshed to suit the scale. With the 4 quantized outputs on the harmonaig these all go into the four oscillators on the synthesis technology e370 quad morphing vco. Each of the e370 oscillators are in the basic morph xy mode using the built in rom b set of wavetables. Wavetables are modulating by various mixes of the befaco rampage, mutable instruments tides, wmd multimode envelopes and music thing modular turing machine. The modulation sources are mixed and split with multiples and mixers. These modulating wavetables then go into a bubblesound vca4p where i'm using 4 mk1 intellijel dixie oscillators all un-synced and free running with sine wave lfos. Each lfo freely fades the voice in and out of the vca4p. As this is unsynced there's no regard to pitch changes linked to changes in amplitude and the swells. I find splitting the gate/rhythm from pitch regarding sequencing to be a freeing and interesting way to work that's not available on traditional instruments. This is just a simple application of that idea with the lfos fading freely unrelated to the other modulation or sequencing of pitch. The sound then goes from the vca4p mix out into a befaco mixer and praxis snake charmer which the output section of the larger case and i'm sending a 'pre' auxiliary out into my fx case. The dry sound first goes into the erica synths fusion delay / flanger vintage ensemble which is giving me short modulated delays giving vibrato like sounds and pushing the input level and overdrive gives us some warmth and grit that thickens up the sound and also fills in the gaps left by the free running lfos pulling quieter sounds and compressing in the on board tube. This then outputs to the feedback 1 bit multitap delay module which has it's delay chip pushed to longer times for some added crackle and noise. I'm using the two delay taps for a shorter and longer delay with little feedback to mix the dry sound for a generally noisier and smeared version of the input. This then goes into the xaoc devices kamieniec with it's on board lfo as slow as possibly for a mildly resonant phase shifting. This goes into mutable instruments clouds set to sew random grains slowly and randomly which are pitch shifted up 2 octaves to fill out some high end flourishes against the closed chord voicings at the core of the patch. Finally this goes into a long lush reverb from the halls of valhalla card in the tiptop audio z-dsp. The stereo fx chain and the mono dry signal are mixed in the befaco hexmix and recorded as a mixed stereo file. I'd consider this to be the main 'reel'. However i split the dry signal and the fx only wet stereo signal and recorded those at the same time so you can choose which reel to use and experiment with dry/wet or blended sounds from this patch.