608 tracce audio royalty-free per "Utensili"

A somewhat large drill powering up and losing power.

Jackhammer and vacuum working through asphalt recorded as close as possible without mic distortion.

Dug up from the mastering stems from an ancient track called 'closer (vip)' i made in 2014. 172 bpm.

A 6-in-1 brass hammer being dismantled and put back together. I am aware that there are a few "pops" in the sound, but i am not completely sure how to remove them, so i left them there in case someone with more experience in audio editing wants them. The sounds i recorded from the smallest possible parts of the hammer are not included because they were way too quiet to be useful :1.

Small sander being spun at different rates.

Various sounds recorded in a traditional blacksmith's workshop. Furnace can be heard in the background. Includes hammering a horse shoe on an anvil and cooling it in water. Also includes blacksmith getting a burn from the horse-shoe and talking about it! no post-processing.

Tool for cut steel and iron. Record use h4n pro, 2019. 01. 09 ≈12:00.

Searching a toolbox. Plastic box with metallic and plastic tools. Mono recording, 48khz/24. Mic: neumann km 185 supercardioid, zoom f8 recorder.

Recording of electrode welding noise of a tube.

Rhythmic hammering on a metallic tool box with a scabbling pick (hammer). Four different styles - first mixed with some scratching sounds, then hammering in three rates of speed. Recorded on zoom h2.

Sample of a tape measure.

Selection of sounds.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Sound of a socket wrench pivoting back.

Operating garden snips.

Operating a sliding metal clamp.

The sound effect of a shovel being smacked against another metal object.

Metal hammer striking concrete.

Extending a telescopic tool, slower this time. A pair of sennheiser me64s into a tascam dr40.

Sounds of weapons and tools layered to suggest several people gathering tools or weapons off a rack, or some kind of industrial activity.

Chop saw started then slicing through plywood.

Metal tool.

Me opening and closing a pliers, recorded with an iphone se.

Arboga belt grinder turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Gas bottle (20 kg) hit with a hose coupler once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Squeezing a staple gun.

Recorded with a zoom h1. Edited in sound forge.

Battery drill gear changed from low to high speed.

Workshop search tool box rummage tools searching wood metal foley.

3 quick turns on a ratchet. Recorded on a zoom h5.

A rough and raw recording of a mechanic doing some tightening work on a tire.

A few sounds of using a normal metal screw-clamp. The sound has been close mic-ed. Recording equipment: akg c214 / focusrite saffire pro 24.

Collection of 4 loop variations with a special compressor. For use in your production. 120 bpm.

I stopped at a dog park in los angeles on my way to work. There weren't too many dogs, but the maintenance workers were there cleaning up, so i recorded them. Recorded with: sound devices 702t, beyer dynamic mc930 mics.

Two, electrically powered jack-hammers at work with various starts, stops and runs as recorded from inside an apartment. Biographical note: currently work is being done on the balconies of my apartment building. . . This is what one hears for several hours every weekday.

Using a drill to put a screw into wood with screw resisting at the end.

Three turns of a ratchet, mixed to sound a bit fuller. Recorded on cubase using an m-audio mic.

Warming up 3d printer, recorded with zoom h4n. Recoding is unprocessed except normalising trimming.

This is a street vendor in seoul, korea who would cut a sweet snack on the sidewalk with scissors and a large knife. It was recorded on minidisc with a portable sony stereo condenser mic.

This sound was taken from a construction area close to building 16. Wave, 44. 1khz, 24bit, stereorecording device: zoom h2 with xy-capsulelow-cut: yes (80hz)normalized to -1dbfslocation: leuphana university lüneburg, building 16. Lat: 53. 228286162730626lon: 10. 403215885162354. Date: 2013-11-19, 13:20h. Recorded by: julia rehfeldt, wiebke stein and laura medrowedited by: laura medrow. This recording was created in the framework of the seminar "soundscape leuphana (ws13/14)".

Poking around in my grandmother's barn - building is approx 140 years old and filled with old tools, furniture and other random things. Recording consists of a lot of rusty metal scrapes and thumps, footsteps on old wood, doors etc. Recorded on a hand-held sony pcm-d50. I've edited out the worst of the wind and other artifacts of my sloppy recording technique, but there may be some still in there.

This was created in pro tools using only the signal generator, and native mixer plugins e. G. Eq, delay etc.

Bass drop for hardcore, metal, or whatever you need it for. I made it from a pure sine wave with some eq and a maximizer. The note is 1st d.

This sound was recorded using a zoom h1 audio recorder and edited on audacity.

Few month ago neighbor make a renovation.

Alluminium part cutted with electronic vertical saw in workshop.

A quartz crystal rod scraped against a steel cup-like object to create the sound of a crystal being inserted into a socket.

Recording of a metal saw at a locksmith's shop. Recorded with rode ntg2 and zoom f6.

Construction ambience: construction site, scaffolding dismantling, metal on metal, voices, apartment courtyard, lifting crane, tools, light traffic. Date/time: 27 january 2023, afternoonlocation: malmö, swedenrecorder: zoom h1n. Feel free to use these sounds in any of your projects. Please attribute to cher1101.

Sounds of using a power saw and increasing the amplitude and speed of the blade.