608 ロイヤリティフリー オーディオトラック の "ツール"

00:00
00:05
Recorded with zoom h1. Working with pieces of wood blocks. Edited with reverb.
著者: Pappabert
00:00
00:20
Opening and closing of a cutter knife in several ways. __recorded in wav 48khz/24bit with the zoom h4n and sennheiser me66. Of course we are happy about every mention. Nevertheless, we do not require any attribution and are happy to provide our sound files free of charge.
著者: Filmorbit
00:00
00:09
Electric wood sander sanding a sheet of ply wood. Hard, loud and abrasive sound, high volume low pitch. Recorded inside a workshop with a zoom h6 recorder. Audio was post-processed to boost the audio. Wood sander was a bosch 230v.
著者: Aidansamuel
00:00
00:13
A few sounds of using a normal metal screw-clamp. The sound has been close mic-ed. Recording equipment: akg c214 / focusrite saffire pro 24.
著者: Capslok
00:00
06:08
I stopped at a dog park in los angeles on my way to work. There weren't too many dogs, but the maintenance workers were there cleaning up, so i recorded them. Recorded with: sound devices 702t, beyer dynamic mc930 mics.
著者: Conleec
00:00
01:20
Jackhammer and vacuum working through asphalt recorded as close as possible without mic distortion.
著者: Cognito Perceptu
00:00
00:08
Construction or woodworking sound of an electric table saw cutting a piece of plywood.
著者: ezwa
00:00
00:12
Operating garden snips.
著者: Sweet Niche
00:00
00:08
Extending a telescopic tool, slower this time. A pair of sennheiser me64s into a tascam dr40.
著者: Zeteny Zpx
00:00
01:06
Different tools falling on wood.
著者: Caroblue
00:00
01:15
Full machine cycle of an unbranded air compressor turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.
著者: Ldezem
00:00
00:18
Four pieces of wood chopped with an axe. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.
著者: Ldezem
00:00
00:12
Holman nc4 pneumatic chipping hammer started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.
著者: Ldezem
00:00
00:02
Loosing a plumber tool from the wall. Recorded with zoom h1.
著者: Pappabert
00:00
00:07
A rough and raw recording of a mechanic doing some tightening work on a tire.
著者: Magnuswaker
00:00
13:10
Two, electrically powered jack-hammers at work with various starts, stops and runs as recorded from inside an apartment. Biographical note: currently work is being done on the balconies of my apartment building. . . This is what one hears for several hours every weekday.
著者: Klangfabrik
00:00
00:30
Gear:. Sound devices 702sennheiser 416.
著者: Greekirish
00:00
00:19
Using a drill to put a screw into wood with screw resisting at the end.
著者: Chewiesmissus
00:00
00:02
Three turns of a ratchet, mixed to sound a bit fuller. Recorded on cubase using an m-audio mic.
著者: Kenrt
00:00
00:23
Warming up 3d printer, recorded with zoom h4n. Recoding is unprocessed except normalising trimming.
著者: Aerror
00:00
00:14
Handling an alligator, monkey or pipe wrench. See picture. Http://static. Panoramio. Com/photos/medium/95491471. Jpg.
著者: Klankbeeld
00:00
00:17
Close proximity power drill done in sound booth. No outside noise.
著者: Josh Herman
00:00
03:52
Poking around in my grandmother's barn - building is approx 140 years old and filled with old tools, furniture and other random things. Recording consists of a lot of rusty metal scrapes and thumps, footsteps on old wood, doors etc. Recorded on a hand-held sony pcm-d50. I've edited out the worst of the wind and other artifacts of my sloppy recording technique, but there may be some still in there.
著者: Slumbermonkey
00:00
00:02
Digging into a tool box. Recorded with a zoom h2n.
著者: Breviceps
00:00
00:24
Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.
著者: Gokalp Gonen
00:00
00:02
A quartz crystal rod scraped against a steel cup-like object to create the sound of a crystal being inserted into a socket.
著者: Joachim Berger
00:00
00:20
Operating a sliding metal clamp.
著者: Sweet Niche
00:00
00:32
Recording of a metal saw at a locksmith's shop. Recorded with rode ntg2 and zoom f6.
著者: Johannes
00:00
00:14
Impact wrench working in the open air :). Recorded witch lenovo p2 smartphone.
著者: Jacekksiazek
00:00
00:03
Desoutter pneumatic drill going through metal, short. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.
著者: Ldezem
00:00
00:02
Wameta tig 1600 started. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.
著者: Ldezem
00:00
00:02
Quick usage of a cordless power drill. Recorded on a zoom h5.
著者: Alaskarobotics
00:00
01:18
Real grinder sound.
著者: Tosha
00:00
00:29
Playing with a bag of screws and dropping them onto a wooden bookshelf.
著者: Musersounds
00:00
01:19
Sounds from a construction. (took some sounds from freesound. Org and put them together, hope you like this).
著者: Pilow
00:00
00:17
A somewhat large drill powering up and losing power.
著者: J
00:00
00:24
The spinning sound of a concrete mixer. Recorded with mobile phone.
著者: Breviceps
00:00
00:04
Synthesized clinking and clanking effect.
著者: Laurenponder
251 - 300 の 608 から次のページ
/ 13