1 314 royaltyfrie lydfiler for «Distorted»

Im sorry i haven’t been uploading lately… i really can’t give a reason as to why i haven’t been uploading any of the teaser kicks lately, nor have i given any download links for the actual xkicks volumes 1 or 2…. Ive actually finished xkicks volumes 1 - 6, each containing at least 250 unique distorted, hardstyle, gabber, obscure, noisy, nasty kicks, and i’m about to finish xkicks 7 real soon here. Ill be putting up the download links for xkicks 1 - 6 on my profile page on free sound:. Http://www. Freesound. Org/people/electroshocknetwork/. Here are various teasers from xkicks 1 - 6. Do you enjoy hearing incredible hard dance kicks? introducing the latest instalment of the xkicks series! xkicks edition 2 brings you 250 new, unique hard dance kicks that will keep you wanting more. Tweak them out with eqs, add effects to them, trim them to your liking, share your tweaked xkicks sounds. Only through the electroshocknetwork can you get sounds like this for free. Xkicks is back with an all-new package featuring 250 brand new, unique hard dance kicks. Xkicks edition 3 features kicks suitable for gabber, hardstyle, jumpstyle and any other harsh, raw sound. Add eq, trim them, add effects, change their pitch. Nothing is impossible to make now that xkicks has arrived. Native instruments meets electroshocknetwork in the latest instalment of the xkicks series! using the incredible “battery” to unleash the full potential of xkicks, electroshocknetwork has never made better raw, xtreme kicks. Featuring 250 unique hard dance kicks, xkicks edition 3 will leave you mesmerized and the crowd cheering as wave upon wave of awesomeness crashes over you.

Another recording of rain and thunder, but in some ways a better one. This one is a surprisingly big crack and rumble preceded and followed by a nice sounding rain. I made this by positioning a stereo-matched pair of akg c451b condenser mics in an exaggerated x-y configuration (a wider stereo field) and aiming them out of my open window. The mics went into a universal audio 2-610 preamp, an apogee duet 2, and then ableton at 48khz and 24 bits. I believe i had the mics set flat, and there was no post processing (though i was mightily tempted to upload the much-better-sounding eqed and compressed files) so that you can fine tune it to suit your needs. You'll notice that the loudest parts of the thunder boom clipped the input, but, due to the pleasant and forgiving nature of vacuum tubes, the clipping sounds more compressed than distorted. Feel free to use this sound in any commercial or artistic work! you do not need to credit me.

Made in ableton live this time, it is a multilayered loop consisting of recordings of an ak47, a 30 caliber 1918, and an m60 machine gun to make a rediculous powerful sound. A very short clicky kick drum with the high end reduced is added before the initial gunshot to make it punch more, otherwise it would sound weaker. There are two mechanical bolt sounds, one covering the upper mid range, and the other covering the extreme highs. Shell ejections and two reverb tails were mixed in at the end with some simple automated panning to make it move around the stereo field. The tempo slowly decreases to simulate barrel heating. Lots of processing. The layers were eq'ed, then ran into a software amp that is gently distorting the low and mid range. Then smashed together with ott multiband upward/downward compression to bring out the details. A maximizer was used to bring up the loudness some. Enjoy.

We develop iphone app that perform musical analysis on recorded audio from the iphone. Our app implementation make use of the audio queue service to receive raw audio buffers from the audio queue callback. In the first version of our app we had the problem of too much clipping on the recording which degrade the accuracy of our analysis. We also suspected that the noise canceling algorithm in iphone 5 produce distorted sound, which is not much noticeable by human ear but distorted enough to affect our sensitive algorithm. We found that the solution to our problem is to set the audio session mode to kaudiosessionmode_measurement. This session mode is supposed to give maximum freedom for us to control the microphone input, which include turning off the automatic gain control and probably noise canceling as well. The solution works very well except that it introduce a strange waveform pattern in the beginning of all recordings in iphone 5. It is very hard to explain the waveform we get, so i made two recordings at freesound so that you can see it visually. The first recording is made in an almost quite environment, and you can see the weird spike in the beginning of the recording. The second recording (this recording) is made with constant background noise, and you can see that the actual sound wave is offset from the strange curve and gradually increase to its original volume. This waveform only happens on iphone 5 devices that we tested, and there is no problem at all for iphone 4s and older generations. We have tried various settings and the glitch is still unavoidable as long as we set the audio session mode to kaudiosessionmode_measurement. We also find similar glitch in one of our iphone 5 devices, in which the glitch happens even if we try to set just the input gain level without changing the session mode. We are not sure if this is a hardware-related bug in iphone 5, or if it is fixable software glitch in the future version of ios. For the moment we are looking for workaround that can avoid this glitch while automatic gain control and noise canceling are disabled.

This sound or sounds was created through the help of vst's, time shifting, parametric eq, cutting, sampling, layering and many other methods of sound manipulation. Follow me on youtube for future tutorials and music. Https://www. Youtube. Com/channel/uc3f2acuv1q0hsuaxqqwotrq-------------i make sounds for freesound. Orgi obviously don't get paid anything for uploading and the premise of using freesound. Org is to share sounds for free to everyone. If you could help me make this a sort of go fund me donation so i can continue doing what i love. Any amount donated is greatly appreciated and words can't show how much i appreciate you. Thank you for reading. Https://paypal. Me/pools/c/81iraceqx0.

Electro-magnetic interference from the colorino talking color identifier and light probe when held near the internal ferrite antenna on the back right of a 13-year-old boombox near the bottom of the am broadcast band, from 530 to 580 khz. You first hear the device inactive being brought near the radio. This gives a low buzz of stacato clicks. At about 00:23 the light probe button is briefly pushed, you hear a quick boop of the light probe with low light level combined with the beginning of the white noise of the device active. If you put your ear near it after you use it, you will hear a slight hiss from the audio amplifier carrier idling for about a minute after last use. On the am radio this translates to white noise. At 00:26 there is a double click and a distorted voice says black. The voice is being picked up by the am radio. 10 seconds of white noise and i press the color button again and it says black. I put something else over the color sensor and it says a few more things. At 00:51 i hold down the light probe button and try to point it at the light above my desk while still holding it close enough to the radio to pick up the emi signal. You hear a warbling tone at 00:59 as the light reaching the sensor increases and decreases in brightness depending on how it's pointed. The signal fades in and out as the device is moved around. This has all happened at 530 khz. At 01:37 i step the radio up to 580 khz where you get a stronger signal. Wibw from topeka competes with the noise throughout the rest of the file. At 01:51 you hear the distorted error beep as i press the color button without anything but air and light in front of the color sensor. It must be pressed up against the thing you want the color of, or it gets in too much ambient light and errors out with a loud protesting beep.

Td-3-tg recorded with zoom h-1. Td was performing slide through octaves with "slide" button pressed in program, and subsequent cs were played, in octave -1 and 0, and higher c in octave 0 and +1, back and forth. Program takes 7 16th notes and the space between notes takes 9 rests. Tempo of the td-3 was set to maximum and the volume control was set to high amount, to let zoom h-1 with rec level setting to 37, be driven up to -6db. Sound recorded in 96khz and 24bits. Trimmed and saved in flstudio edison, what made sound 32bit. No amplify, no normalisation. "tune" knob of td-3 was set to maximum as well as "cut off", "envelope" and "accent". "resonance" and "decay" was set to one o'clock. "waveform" swicth was set to square. No distortion. Zoom h-1 was plugged by a cable, td-3 output to line in. Cable was named vitalco - 1/8 inch trs to 1/4 ts, male to male, 3m.

I was just going through my sounds, when i decided "hey. . . I'm gonna release this. " so here you all go! i'm really proud of how this turned out. This, as you can tell, is a deep eerie ambience loop. It can be used for anything you want. I like to leave things up to the imagination of the audience. How it was made:. Software used:-fl studio 20-harmor-harmless-fruity parametric eq 2-valhallaroom. So basically what i did was get a low pitch sawtooth waveform, put it through some effects like harmonization, a low pass filter with high resonance, a phaser, and a load of distortion. The main synth is made with harmor. (yes, this is all one synth. It just has a lot of dynamics. ) i then processed it with some eqing. What made this sound what it is would be the reverb. I put 2 layers of valhallaroom on the synth. One has a very short decay time, and gives it texture. The other gives it the atmosphere. To add some more depth, for the final touch, i layered a sub-bass underneath it. Which is just a low sine-wave with reverb on it, which i used harmless to make. I hope you enjoy this!.

Synthesized sound of a flying helicopter. The patter is as follows:. Sound 1 || sound 2 || sound 3 || sound 4 || sounds 1+2 || sounds 2+3 || sounds 3+4 || sounds 1+3 || sounds 2+4 || sounds 1+2+3 || sounds 1+3+4 || sounds 2+3+4 || sounds 1+2+4 || sounds 1+2+3+4 || sounds 1+2 again || sounds 1+2 with phaser effect (pitch up and down). Each sound above is exactly 2 seconds long except the second-to-last sound (4 seconds long) and the last sound (8 seconds long). All sounds synthesized in propellerheads reason's thor polyphonic synthesizer. Here's how i did it: used two oscillators (one noise oscillator and another multiple-wave oscillator), and then passed them through two different filters. In each filter, i lfo'd the frequency knob at 2. 0hz (120bpm), and the pattern you see above is each oscillator-filter combination muted in different ways. For the last sound, i applied a phaser effect and automated the frequency knob or some other knob to give that pitch-up pitch-down effect.

4-channel hq record of a sudden and heavy thunderstrike (nearly) without rain in the afternoon of a hot summerday. The recording equipment was prepared for recording thunder, so there is no distortion, no compression or (auto)gain reduction done by a limiter in the zoom f8, means the whole dynamic is still there and will be audible by a adequate monitor/audio equipment. ;-)the sound was not edited or otherwise enhanced with effects. This file can be used as a intro followed by my other track (link below), which has soft rain at the beginning, before the thunder comes. . . ;-https://freesound. Org/people/bluedelta/sounds/367222/. The 4 channels are recorded in irt-cross technique (microphone distance 25cm) so it is a 360° (4x90°) record. Http://irt-cross. Mozello. De_________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones). Ch1 = flch2 = frch3 = rlch4 = rr. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. Https://www. Sounddevices. Com/product/wave-agent/. Comments about this atmo-record are welcome! ;-). . . And you can help others to find this sound easier by (star)rating this track.

I made this recording of ambient backgroud noise directly beneath the eiffel tower. The shape of the eiffel tower creates a unique acoustic environment in the vicinity of the tower, especially beneath it. You can hear a much higher level of background noise than you would hear in an open area, and the noise is unusual. The tower is made of thin pieces of iron arranged into a complex and very large lattice, which reflects and slices and dices sound in a unique way. Thus you have a high level of very even and unidentifiable background noise as noises from the ground and the platform get bounced around and distorted by the structure of the tower. This recording was made from the ground, with microphones pointed straight upwards about 2 meters off the ground. Noises from the ground travel upwards and bounce around the inside of the tower, then drift back down. There are noises in the tower itself as well, such as elevator motors and people on the platforms. The first platform, at 57 meters, is open in the center, whereas the second platform, at 116 meters, is completely closed and flat on the bottom. Wind moving through the tower also makes noise, and again the open structure of the tower changes the noise in a way that is specific to the eiffel tower. There wasn't much wind at ground level for this recording, but i don't know what the wind speed was at higher levels in the tower. Some voices in multiple languages are audible in the recording, as the area beneath the tower is awash in tourists. Recorded hand-held with a zoom h4n and a mini windjammer, using built-in mics, in stereo 96 khz / 24 bits, then converted to mp3 at 320 kbps because of the size of the file. Duration is about two minutes.

So one of tac0's friends came by with a civilian style contact stun gun and tac0 does what he does best, blasts it a small room for 1/10 of a second. Mp3 48,000 hz at 256 kbps. Also commonly and incorrectly referred to as a "taser" which is on the same level as calling a magazine a "clip". See google for more info. I can't help that it sounds like a bee. Also if it's too short, you'll have to make it longer in your daw. Uses (apart from videos that involve a stun gun or maybe a real taser brand taser): magic lighting zaps? a game show buzzer?. Possible vst modifications. Reverb: sound impulses for speakers. Distortion (guitar style): military style radio noise. Chorus/flange: science sounding things. Pitch: at -30 semitones you get some low pitched sound similar to a airsoft aeg which may be ideal for montage airsoft videos where piles of tokyo marui m4s traditionally muffled by the gopro waterproof case. // at -45 semitones you resemble gun fire at a distance. Mathematically at 10 rps (600 rpm) you could use this as a sit in for a distant fired ak-47 rifle ideal for video games, war movies, mods, etc. Apply a resonant filter and some reverb for appropriate outdoor acoustics. And nobody will know your distant machine gun sound was a civilian stun gun except for us semi colon right parenthesis. Or you could also apply ringmod at ~9000 hz to simulate ear ringing for those ptsd scenes. Trimming + looping + pitch: if you can loop this properly in a daw you could even create a saw style bass for electronic dance music.

This is an updated (improved is debatable) version of my previous electric contact stun gun firing sound, except longer and without peaking. Oh and higher sampling rate so you can hear all the higher frequencies better when you pitch it down. You'll immediately notice it sounds like the boring buzz of a bee. Oh well, not like you'll get a lightning storm. That's about it. Don't forget to have fun. Copy pasta---also commonly and incorrectly referred to as a "taser" which is on the same level as calling a magazine a "clip". See google for more info. I can't help that it sounds like a bee. Also if it's too short, you'll have to make it longer in your daw. Uses (apart from videos that involve a stun gun or maybe a real taser brand taser): magic lighting zaps? a game show buzzer?. Possible vst modifications. Reverb: sound impulses for speakers. Distortion (guitar style): military style radio noise. Chorus/flange: science sounding things. Pitch: at -30 semitones you get some low pitched sound similar to a airsoft aeg which may be ideal for montage airsoft videos where piles of tokyo marui m4s traditionally muffled by the gopro waterproof case. // at -45 semitones you resemble gun fire at a distance. Mathematically at 10 rps (600 rpm) you could use this as a sit in for a distant fired ak-47 rifle ideal for video games, war movies, mods, etc. Apply a resonant filter and some reverb for appropriate outdoor acoustics. And nobody will know your distant machine gun sound was a civilian stun gun except for us semi colon right parenthesis. Or you could also apply ringmod at ~9000 hz to simulate ear ringing for those ptsd scenes. Or some gau-8 avenger. Trimming + looping + pitch: if you can loop this properly in a daw you could even create a saw style bass for electronic dance music.

Street noises recorded while walking through the most touristy area of montmartre, in paris, france. Streets visited include rue des saules, rue norvins, rue du mont cenis, rue du chevalier de la barre, rue du cardinal guibert, rue azais, rue saint eleuthere, in that order. Highlights include:. 00:00-00:30-> walking south along the relatively quiet saules ("willow") street in montmartre; footsteps and squeaking boots. 00:42-01:02-> street-cleaning truck passing on the same street. 01:02-01:30-> piano playing inside a restaurant on norvins street. 01:30-01:36-> rock music in some other shop. 01:44-01:46-> kids running past. 01:56-01:58-> barely audible music somewhere, under heavy crowd sounds. 01:56-02:59-> crowd noises, clinking silverware and plates in the restuarants i'm passing, increasingly heavy crowd. 03:00-03:21-> passing van, followed by another bus. 03:21-04:06-> ill-behaved young males ruining my take with strange ape-like cries. 04:06-04:17-> i think this was a passing taxi. 04:20-05:08-> someone playing a steel drum on the ground in mont cenis street. 04:43-------> someone closing a gate, i think. 05:16-05:18-> american tourist exclaiming at close range in chevalier de la barre street. 05:53-06:18-> street portrait artists talking and joking with each other. 06:30-07:25-> someone playing the harp on cardinal guibert street next to the basilica, partially drowned out by a passing car. 07:25-08:23-> someone singing on the steps in front of sacré-coeur. He had a powerful but distorted amplifier--the bad sound quality was like that in real life. I turned around in front of the basilica on this dead-end street and that's why the music switches sides. 08:23-08:40-> yes, that's a chainsaw. The city was trimming some large trees. 09:33-09:47-> more chainsaw noise as i walked past the workers on azais street. 10:00-11:00-> increasing crowd noise as i walk back north to the busiest part of montmartre along saint eleuthere street. Recorded with a hand-held h4n at 96 khz / 24-bits, stereo, compressed into 160 kbps / 44. 1 khz / 16 bits mp3. Recording date march 16, 2012, in the early afternoon.