610 darmowych plików audio dla „Przybory”

Old machine tool cone, rec with zoom h4n.

Sample of a tape measure.

Circular saw sawing a 2x6 tools.

Playing with a bag of screws and dropping them onto a wooden bookshelf.

Squeezing a staple gun.

A 6-in-1 brass hammer being dismantled and put back together. I am aware that there are a few "pops" in the sound, but i am not completely sure how to remove them, so i left them there in case someone with more experience in audio editing wants them. The sounds i recorded from the smallest possible parts of the hammer are not included because they were way too quiet to be useful :1.

The sound effect of a shovel being smacked against another metal object.

Circular saw on metal. Close up then general recording in a truck shed. France, 2007. Recorded with schoeps ab ortfrecorded on tascam dap148khz, 16 bits.

Recording of a nail being hit into a wood board with a club hammer. Loud hard repetitive sound post-processed to add slight compression to the audio. Recorded inside a workshop using a zoom h6 recorder.

Sound of screws being moved around.

Sound of a screw being dropped on metal.

Drilling sound.

Jackhammer and vacuum working through asphalt recorded as close as possible without mic distortion.

Sound of a socket wrench pivoting back.

Operating garden snips.

Opening and closing box cutter knife.

A pneumatic air tool (jackhammer) was used to lower some concrete blocks on the exterior of our garage. I was inside the house recording it with a zoom h2 recorder. So this was recorded through an insulated wall. This is the longer recording.

Sounds of using a power saw and increasing the amplitude and speed of the blade.

Unbranded needlegun scaler started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Recorder: tascam dr-60d mkiimicrophone: sennheiser me66.

Close recording of an air hammer and some other building sounds in the background. Zoom h2, 48khz, 24bit.

Synthesized clinking and clanking effect.

This sound was recorded using a zoom h1 audio recorder and edited on audacity.

Alluminium part cutted with electronic vertical saw in workshop.

The sound of a jackhammer working on concrete. Sound recorded with samson q1u.

A somewhat large drill powering up and losing power.

A jackhammer backed with a vacuum pulsing against asphalt pavement.

A jackhammer backed with a vacuum working its way through asphalt pavement from a medium distance.

Cutting a tile of wooden flooring with a handheld circular saw. Recorded in cluj, romania.

Two, electrically powered jack-hammers at work with various starts, stops and runs as recorded from inside an apartment. Biographical note: currently work is being done on the balconies of my apartment building. . . This is what one hears for several hours every weekday.

Skil-brand handheld jigsaw. Some stops & starts, then an extended drone. Recorded indoors using a zoom h4n with built-in mics.

Dropping metal tools on concrete. Recorded in a garage using tascam im2 stereo mic & ipad2.

Using a drill to put a screw into wood with screw resisting at the end.

Chord progression.

I stopped at a dog park in los angeles on my way to work. There weren't too many dogs, but the maintenance workers were there cleaning up, so i recorded them. Recorded with: sound devices 702t, beyer dynamic mc930 mics.

Unbranded impact wrench started four times against a bench. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Ingersoll rand riveting hammer started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded straight die grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Spinning a cordless, brushless drill (check empty, no load speeds) at various bursts of different length. Some in 1st gear and some in 2nd gear; in 2nd gear the electric brake is more pronounced. Mic changes position now and again to vary the sound character.

Sound of a closing wooden garage door.

Poking around in my grandmother's barn - building is approx 140 years old and filled with old tools, furniture and other random things. Recording consists of a lot of rusty metal scrapes and thumps, footsteps on old wood, doors etc. Recorded on a hand-held sony pcm-d50. I've edited out the worst of the wind and other artifacts of my sloppy recording technique, but there may be some still in there.

The distant sound of hammering, with reverb off of moth metal and wood objects.

1 bar of a toolbox close mic'd and playing at 114bpm.

Recording of a metal saw at a locksmith's shop. Recorded with rode ntg2 and zoom f6.

Electric wood sander sanding a sheet of ply wood. Hard, loud and abrasive sound, high volume low pitch. Recorded inside a workshop with a zoom h6 recorder. Audio was post-processed to boost the audio. Wood sander was a bosch 230v.

Workshop search tool box rummage tools searching wood metal foley.

Three turns of a ratchet, mixed to sound a bit fuller. Recorded on cubase using an m-audio mic.

This sound was taken from a construction area close to building 16. Wave, 44. 1khz, 24bit, stereorecording device: zoom h2 with xy-capsulelow-cut: yes (80hz)normalized to -1dbfslocation: leuphana university lüneburg, building 16. Lat: 53. 228286162730626lon: 10. 403215885162354. Date: 2013-11-19, 13:20h. Recorded by: julia rehfeldt, wiebke stein and laura medrowedited by: laura medrow. This recording was created in the framework of the seminar "soundscape leuphana (ws13/14)".

Me opening and closing a pliers, recorded with an iphone se.

Recorded with zoom h1. Working with pieces of wood blocks. Edited with reverb.