image_processing20200801-1307-6olks7.jpeg
Thumb 0
Thumb 1
Thumb 2
Thumb 3
Thumb 4
Thumb 5
Thumb 6

Double Stack Speed Loader model 3d

Support Removal There is a support upright for the cartridge follower compressor tab. There are also thin connections from the support and compressor tab to the speed loader frame. Cut the thin connections to the frame and break the upright support free. The support piece will break about 18 mm (almost 3/4") down from the top of the loader. Run an exacto or thin blade between the frame and the follower compressor tab (the protrusion). If needed, clear between the tab and the frame to nearly 25mm from the roof of the inside top of the loader. You may not need more trimming depending on your printer. Magazine clearance behind tab.
Publicat de:
Creazilla
Sursa: Brian Stott on Myminifactory

Loading...

24 descărcări
FormatSTL
Size40.92 x 40.92 x 52.63
Print ReadyDa
unelteimprimarestl accesoriirevistă

MAIS COMO ESTE

Creazilla logo
Peste 10 milioane de resurse grafice gratuite pentru creatorii de conținut și designeri
© 2018 - 2025 Creazilla
Resursele noastreToate imaginileFotografiiIlustrații digitaleClipartIcoaneImagini PNGEmojisSilueteArtă tradiționalăModele 3DVectoriFonturiNumele culorilorPalete de culoriGradiente de culoareAudioAnimațieVideoȘabloane
InformațiiDespre CreazillaTerms of useTech teamPrivacy policyLicence Information
FeedbackContact Us