461 Royalty-Free Audio Tracks for "Steel"

Created this sound by clinking fork and spoon together in order to simulate handcuffs dangling or being moved. Recorded with tascam dr-05.

I combined and modified editor_adp's "clang 2" and "clang 4" into something more impactful. I use it on youtube, and since it was from the public domain, i thought i should give it back.

Metal hits, rumbles, scrapes. Original sound was a shed door. Cut up and edited sound 264889 by epicwizard.

The assorted sounds of a recycling center warehouse. Recorded nearest the can sorter, where the aluminum and steel containers are tumbled. Also background hum from blowers and the forklift, which beeps as it backs.

A high-quality mp3 recording of a person sharpening a war dagger. Sound created by rubbing a fork on a butcher knife. Recorded with a black sony digital ic voice recorder.

Not perfect, but not bad, here's a freight train passing only a few feet in front of the recording device. . . Enjoy! this train is passing through houston, british columbia, canada on a cold winter morning.

This is an excerpt from slow decay, a project commissioned by istimrar 2021 - an irtijal festival initiativedrumming by nadia daou playing various percussions on a steel metal plate.

C major scale played on a martin sigma 6 string acoustic guitar with old steel strings using a seymour duncan soundhole pickup into a presonus audio box interface. Recorded at 120bpm in living room.

Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Kenco 20 ton punch press, punching. 13” x. 024” steel coil, 2 ø. 062” holes and cut to 3’ l. Recorded at a manufacturing factory in stereo with an edirol r44 recorder and rode nt4 microphone.

Some metal "shing" sounds, great for picking up swords or large knives. Created with a large, sharp chef's knife and a wooden cutting board. Recorded at close range in a relatively anechoic closet.

Remastered old church bell sound to make it clean (no noise. . Almost). Based at https://freesound. Org/people/dsp9000/sounds/76405/.

This is the sound of a shaktipan recorded in biella-italy. It was tested just after tuning this beautiful piece of art. Shell material used is nitrated steel. Duration of making: 98 daysmaker: andrea tonella aka. Shaktipan.

Striking an iron bar with another tiny iron bar. Please, consider listening my music on bandcamp:. Https://mrthenoronha. Bandcamp. Com/album/mstech-educational-projects-soundtrack.

A bell announces a train is coming, quickly followed by the roar of an approaching engine. Many train cars pass in a cacophony of steel wheels and roaring mass, followed by a fade-out.

A 7:00 clip of the construction around a new bridge that includes a barge mounted pile driver striking steel piles into the water. Summer 2013construction audio as crews work to replace the johnson st. Bridge in victoria, bc, canada.

Sample of a prs tremonti guitar being played with an ebow. An ebow is a magnetic device that causes a steel string to vibrate by creating two magnetic poles on either side of the string.

Kenco 10 ton punch press, forming and crimping a 3/4" diameter x 1. 5" long steel cylindrical part on to a rubber hose. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.

A blacksmith is working in his traditionnal forge. Fire,gently hammering metal. Recorded with schoeps ab ortf and schoeps cmc6 mk41recorded on sounddevice mixpre6reducted to stereowave stereo 24 bits 48khzfrance, june 2022.

Two metal creaks/groans that could be used for a large swinging gate or haunted house effect. Recorded from a metal sign rotating on a pole during a lightly breezy day.

This is the sound of the short part of guitar strings plucked over the headstock, between the nut and tuning pegs. They do not make for any particular sounds, harmonies or melodies, just random tones which may be used for some sound design, noises, jingles etc. I recorded this for my own purposes (game sfx) with 3 different guitars (see the other 2 files as well) and thought i would share it with anyone who may find it useful - if you do, please help yourself and enjoy! ;).

1 minute close-up recording of the pulling steel cable of the san francisco cablecars. Good for sound design. Recorded on a sound devices 663, sennheiser 8060 microphone. 48k - 24 bit.

Dropping an aluminium pipe on a concrete floor. As it was outdoors i applyed a high pass filter at 400hzno other editingrecorder: zoom h6 with xy capsuelresolution: 96/24.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

A zoom h6 recorder was used, with the xy capsule to get a better range of the clock when held very close to it. The clock is made out of wood with two steel arms and a plastic seconds arm.

Recording of a guitar string being played with an ebow. (an ebow is a magnetic device that causes a steel string to vibrate in its magnetic field. ) i believe this was recorded on a prs tremonti guitar.

The assorted sounds of a recycling center warehouse. Recorded nearest the can sorter, where the aluminum and steel containers are tumbled. Also background hum from blowers and the forklift, which beeps as it backs. This sample contains more can action.

I make a lot of my own samples for my music. They are often for use in granular synthesis or manipulated so that they become unrecognizable. I like to make them available for everyone. Enjoy!.

A high quality shrill screech produced from large metal panels scratching against an old atx panel using it's edges. I imagine derelict buildings with steel slide doors being open slowly or a blade dragged on the ground.

Walking on a dirt road wearing sketcher rubber-soled work shoes with steel toe protection on a rainy day in the suburbs of detroit, michigan!.

Two stainless steel bowls of different sizes were partially filled with water and knocked around to produce watery, springy, boingy sounds. Recorded in stereo using a zoom h2 digital recorder. The sounds have been reversed in this file.

The assorted sounds of a recycling center warehouse. Recorded nearest the can sorter, where the aluminum and steel containers are tumbled. Also background hum from blowers and the forklift, which beeps as it backs. This sample contains more blower and less cans.

A small stream of water flowing over the stone over-flow from wiremill dam, a disused steel grinding mill pond in the porter brook on the western outskirts of sheffield, uk. Recorded using the irig recorder app on an iphone 3gs.

Wameta tig 1600 started. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Leg vise being tightened slowly. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

The sound of an (empty) missile head being hit against another during manufacturing. Cleaned up with izotope rx7 standard and neutron 2. Could be used for factory sound or something in a forge? have fun with it!www. Vnzi. Bandcamp. Com.

They are building a new residential tower opposite ours in rotterdam, the netherlands. In this recording, the builders are pouring concrete on the 25th floor to create new walls. Sony pcm-d50.

1 minute sample loop of a table slam (putting a cup on a steel table next to an ipod 5 microphone) and fireworks explosion field recording, easter saturday, neutral bay, sydney, australia.

Using a handfull of small allen wrench extension sockets in my hand, i poured them into a sock and poured them back out into my hand with variations. Recorded with my tascam dr-60d and rode ntg-2 shotgun mic. Please comment.

Drill press drilling through metal. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

A match taken from the box, light and burned. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Torch ignited once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Water running at the side of an un-made lane near forge dam, a disused steel grinding mill pond on the porter brook on the western edge of sheffield, uk. Recorded using the irig recorder app on an iphone 3gs.

Various knife sounds pulling it out of the sheath, scraping, striking together and letting the blade ring, rubbing two together for the classic "sharpening" sound. Recorded on tascam dr-40, cleaned up in audacity. Shout-outs welcome: production-now. Com.

The traditional country song Little Bessie, performed by the Alabama Barnstormers (a duo which consists of country singers Tom Darby [vocal, guitar] and Jimmie Tarleton [vocal, steel guitar]). (The Alabama Barnstormers name was used for other US country acts reissued on Regal Zonophone)

Instant mocha (double choc mocha, to be precise) being stirred using a stainless steel teaspoon in a ceramic mug. Recorded using a neumann tlm102 through a focusrite scarlett 8i6. Some noise reduction applied in adobe audition.

Gas bottle (20 kg) hit with a hose coupler once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Synthesized sound of a sharp sword being drawn. This was created using dexed, a yamaha dx7 emulation, with a touch of chorus. En garde, scurvy cur.

A raven flying by overhead in a forest on gabriola island off the coast of bc. Some droney ambiance from steel mill across the water in nanaimo. As the raven flies overhead, it is remarkable how well the mic picked up the flapping of its wings. Recorded with a zoom h2.

This is old and my memory not what it used to be. However, i do recall hitting a steel ruler against an empty paint tin and making some sort of popping sound with my voice. Then exposing it to terrible amounts of electronic torture until it melted with sonic extacy!.