4 776 zvukových súborov bez licenčných poplatkov pre "Kov"

Hitting and scraping an anvil with a large knife blade.

Sound made by bowing a detuned guitar tied to a clothes hanger. Recorded with two contact microphones. No effects were added, the apparent reverb tails are the waves resonating within both the guitar and the metallic clothes hanger.

Soundscapelarge space outside. Industrialnear the canalworkers far awayi make noises with various objects found under a bridge.

Spoon hitting and tapping a glass lotion bottle.

My neighbour is working at the second floor. Metal hit, pushing heavy stuff, crackings and vibrations by some human body mass at the old wood floor. In the second plan, we can hear passing a train and some cars. Quiet atmosphere with singular acoustic, like a sunday's work.

A recording of sounds using an air duster. Recorded using my h4n zoom recorder, i captured the sprays of wind, the sizzle sound after the duster in used, the tapping of the metal container, and the flicking rumble of the straw. Sound is in stereo, and is in. Wav format.

Deep hollow metal impact, resonant.

A bit boosted flicking lighter sound.

Light rain recorded at santa marta, colombia.

Heavy gain but not super high gain. Think loud marshall amp with the guitar player teasing you to the start of the song. And yeah it sounds almost like that one song you all know.

Trashcan/litterbin metal flap openened an closed. I did this in a big hall at school. Recorded with edirol r-1.

Usa, arizona - a windmill is squeaking alone in the desert. Sound recorded by a ms setup schoeps microphone cmc6mk41+cmc6mk8cooper mixer + zoom h4n recorderms is encoded in stereo left-rightrecorded en 2009. This sound has been used on:http://mildadventures. Weebly. Com/bushmanland-circuit. Html. More sounds on http://www. Felixblume. Com. The same sound on sound cloud:http://soundcloud. Com/felixblume/usa-desert. Please rate the sound or comment it if you like it !.

Hitting a metal bowl with a wooden spoon once. Recorded with a tascam dr-40.

This a recoding of an arc welding machine being used to make electric sparks. Gear used: neumann ku100 dummy head, schoeps cmc 5u mk8, schoeps minicmit, zaxcom maxx.

I tried to make a sort of explosion w/ my voice, and added a compressor, reverb, a little bit of distortion, quicker tempo, and i lastly slowed it down.

Sounds of a kettlebell on concrete, dragging and impact.

Audio meant to imitate the sound of people working. It was created from an edited recording of handling, and operatinga toaster oven. -----------------------------------------------------------------------. This sound, like everything i upload here,is completely free for anyone to use. You may use it however you please. I hope it is useful. 🎶.

Playing around with, picking up and dropping metal tools in a toolbox.

This recording is for people who hate the highlighted high frequencies. An old sabian aax small recorded with a røde m5 mic. I the created two copies of the original recording:1. On the first file i applied low pass at 2 khz and hard compression at -24 db without makeup gain. 2. On the second file i applied high pass at 2 khz and hard compression at -24 db without makeup gain. Then i lowered -2 db all the spectrum except for the band from 3. 5 khz to 9. 1 khz and i applied hard compression at -24 db without makeup gain. I merged the two files. The envelope was very flat due to the compression and thus i reshaped it on wavelab (process > level envelope. . . Or press the "v" keyboard button; draw a natural fade out in steps [non-linear]). The result is a warm crash for people who don't want them loud.

Dropping change.

Made these sounds with a sheet of metal! have you ever heard how crazy gibbons sound in the wild? it can sound very similar to this. Would love to know what people use it for :).

Made these sounds with a sheet of metal! have you ever heard how crazy gibbons sound in the wild? it can sound very similar to this. Would love to know what people use it for :).

Two custom contact mics clipped to a moka pot whislt heated on a gas hob. The sound of the metal expanding can be clearly heard and the coffee flow sound is audible towards the end of the recording. Tascam dr-22wl, custom stereo contact microphones20-05-10_091458_dr-22wl_moka_coffee_contact. Wav.

Short sound of opening the can.

I needed a sound effect for an audio project, specifically the sound of someone moving around in a bathtub full of water and ice. Being too lazy to go out and get a carpload of ice cubes, i raided the ice-maker in the refrigerator and built up a stockpile, then dumped them all into the metal kitchen sink, added some water and a few empty ice cube trays for flavor, and stirred them about using a glass mixing bowl and a wooden spoon.

The shaking of a chain link, metal fence.

Mechanical metallic sound that sounds like a key. Recorded using the sound of a self-locking pliers. Then processed on audacity for noise removal.

A 3-inch folding pocket-knife opening and closing. Recorded very close to the microphone. Makes a snick/click sound. The sharp blade folds into a steel housing so the sound is metal on metal. Recorded: august 2014, with android voice recorder (mono), inside/evening in very quiet room. Noise reduction with audacity.

This is the dirty tony's tom 14''. He recorded it at johnny's studio, the only studio with a hole in the wall! it has been recorded with four mics, and this is the mix of all!.

A section of the recording at https://freesound. Org/people/nlux/sounds/620955/ re-purposed for use in the makenoise morphagene eurorack synthesizer module. A high-pitched, metal windchime, sent through some granular processing software. The reel is divided into two, long halves: one with the sound playing forwards and one with it playing in reverse. This means i can easily switch from forward to reverse without tuning issues, simply by applying cv to the morphagene's 'slide' control.

The sound of a lowrider pulling up and using its hydraulics. Recorded with a ntg3 and a sound devices 702.

While i was recording someone sharpening a garden scrape on a dual stone grinding machine, the utensil got stuck between one of the stones and a metal protective bracket, creating a terrifying noise until the motor gives up. Year: 2020location: aalsmeer, the netherlandschannels: 1 (mono)microphone: unknownmic polar pattern: cardioid.