image_processing20200801-1307-6olks7.jpeg
Thumb 0
Thumb 1
Thumb 2
Thumb 3
Thumb 4
Thumb 5
Thumb 6

Double Stack Speed Loader 3d модель

Support Removal There is a support upright for the cartridge follower compressor tab. There are also thin connections from the support and compressor tab to the speed loader frame. Cut the thin connections to the frame and break the upright support free. The support piece will break about 18 mm (almost 3/4") down from the top of the loader. Run an exacto or thin blade between the frame and the follower compressor tab (the protrusion). If needed, clear between the tab and the frame to nearly 25mm from the roof of the inside top of the loader. You may not need more trimming depending on your printer. Magazine clearance behind tab.
Опубліковано:
Creazilla
Джерело: Brian Stott on Myminifactory

Loading...

24 завантаження
ФорматSTL
Size40.92 x 40.92 x 52.63
Print ReadyТак
інструментидрукstlаксесуаржурнал

БІЛЬШЕ ТАКОГО

Creazilla logo
Понад 10 мільйонів безкоштовних графічних ресурсів для дизайнерів і творців контенту
© 2018 - 2025 Creazilla
Наші ресурсиВсі зображенняФотографіїЦифрові ілюстраціїКліпартиІконкиPNG зображенняЕмодзіСилуетиТрадиційне мистецтво3D моделіВекториШрифтиНазви кольорівПалітри кольорівКольорові градієнтиАудіоАнімаціяВідеоШаблони
ІнформаціяПро CreazillaУмови використанняTech teamPrivacy policyLicence Information
Зворотній зв'язокContact Us