662 безкоштовних аудіофайлів для "Інструменти"

Battery drill gear changed from low to high speed.

Circular saw on metal. Close up then general recording in a truck shed. France, 2007. Recorded with schoeps ab ortfrecorded on tascam dap148khz, 16 bits.

Quick usage of a cordless power drill. Recorded on a zoom h5.

Opening and closing of a cutter knife in several ways. __recorded in wav 48khz/24bit with the zoom h4n and sennheiser me66. Of course we are happy about every mention. Nevertheless, we do not require any attribution and are happy to provide our sound files free of charge.

A single click of a wratchet wrench. Check out the rest of the pack for some other versions.

Recording of a handheld hacksaw sawing at a piece of ply wood. Recorded inside a workshop using a zoom h6 recorder. Hard loud audio.

Striking a galvanized steel wildlife tunnel with a metal tire tool repeatedly, producing a ringing sound.

A pneumatic air tool (jackhammer) was used to lower some concrete blocks on the exterior of our garage. I was inside the house recording it with a zoom h2 recorder. So this was recorded through an insulated wall. This is the longer recording.

Skil-brand handheld jigsaw. Some stops & starts, then an extended drone. Recorded indoors using a zoom h4n with built-in mics.

Old machine tool cone, rec with zoom h4n.

Hammer.

The sound of a jackhammer working on concrete. Sound recorded with samson q1u.

Close recording of an air hammer and some other building sounds in the background. Zoom h2, 48khz, 24bit.

Playing with a bag of screws and dropping them onto a wooden bookshelf.

Bird sound made with a flute. Projet “bruitages” coordonné par josé carrasco, classe de jérôme euphrosine au lycée français de barcelone, hiver 2013.

This sound was taken from a construction area close to building 16. Wave, 44. 1khz, 24bit, stereorecording device: zoom h2 with xy-capsulelow-cut: yes (80hz)normalized to -1dbfslocation: leuphana university lüneburg, building 16. Lat: 53. 228286162730626lon: 10. 403215885162354. Date: 2013-11-19, 13:20h. Recorded by: julia rehfeldt, wiebke stein and laura medrowedited by: laura medrow. This recording was created in the framework of the seminar "soundscape leuphana (ws13/14)".

Close proximity power drill done in sound booth. No outside noise.

20 brass-instrument makers are working in the old manufactory "gebr. Alexander" in mainzthe instrument maker franz ambros alexander arrived 1782 to mainz, the gutenberg-famous city on the rhine. He was in the craft guild, and founded a construction company to fine musical instruments. Until today - more than 250 years later - is this company under the name alexander in possession and under the leadership of the descendants of the founder. Http://www. Gebr-alexander. De/.

The distant sound of hammering, with reverb off of moth metal and wood objects.

A stapler being used.

Jackhammer and vacuum working through asphalt recorded as close as possible without mic distortion.

A 6-in-1 brass hammer being dismantled and put back together. I am aware that there are a few "pops" in the sound, but i am not completely sure how to remove them, so i left them there in case someone with more experience in audio editing wants them. The sounds i recorded from the smallest possible parts of the hammer are not included because they were way too quiet to be useful :1.

Recorder: tascam dr-60d mkiimicrophone: sennheiser me66.

Various sounds recorded in a traditional blacksmith's workshop. Furnace can be heard in the background. Includes hammering a horse shoe on an anvil and cooling it in water. Also includes blacksmith getting a burn from the horse-shoe and talking about it! no post-processing.

Searching a toolbox. Plastic box with metallic and plastic tools. Mono recording, 48khz/24. Mic: neumann km 185 supercardioid, zoom f8 recorder.

Sounds of various rotations of electric screwdriver in the air. Check out my edited and polished sound portfoilo at https://audiojungle. Net/user/thesoundcraft?ref=thesoundcraft.

Recording of electrode welding noise of a tube.

Rhythmic hammering on a metallic tool box with a scabbling pick (hammer). Four different styles - first mixed with some scratching sounds, then hammering in three rates of speed. Recorded on zoom h2.

Note from đàn bầu instrument record from iphone app 'đầu bầu'. Record use unknown microphone 2010.

Sounds of weapons and tools layered to suggest several people gathering tools or weapons off a rack, or some kind of industrial activity.

Sample of a tape measure.

Selection of sounds.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Operating a sliding metal clamp.

The sound effect of a shovel being smacked against another metal object.

Metal hammer striking concrete.

Sound of using a wrench tool/ allen key to tighten bolts.

Extending a telescopic tool, slower this time. A pair of sennheiser me64s into a tascam dr40.

Made with session strings pro.

Chop saw started then slicing through plywood.

An altered version of a flute recording.

Me opening and closing a pliers, recorded with an iphone se.

Cutting a tile of wooden flooring with a handheld circular saw.

Cutting a tile of wooden flooring with a handheld circular saw. Recorded in cluj, romania.

The sound of me twisting the end of a pen of novolog insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

The sound of me twisting the end of a pen of lantus insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

Arboga belt grinder turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded impact wrench started four times against a bench. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded needlegun scaler started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Ingersoll rand riveting hammer started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.