image_processing20200801-1307-nyhrk1.jpeg
Thumb 0
Thumb 1
Thumb 2
Thumb 3
Thumb 4
Thumb 5
Thumb 6
Thumb 7
Thumb 8
Thumb 9
Thumb 10
Thumb 11
Thumb 12
Thumb 13
Thumb 14
Thumb 15
Thumb 16
Thumb 17
Thumb 18
Thumb 19
Thumb 20
Thumb 21
Thumb 22
Thumb 23
Thumb 24

Dual-Action Hidden Blade mẫu vật 3 chiều

The video shows the assembly sequence. Here are a few notes on the steps: The shell should be smooth and flat on the inside The blade needs to slide freely in the shell The latches are placed to lock the blade in the retracted and extended positions. They should bend out of the way as the blade moves and then snap into place The kicks need to slide freely in their slot, and are under tension with a rubber band between them With the slide in place holding the kicks apart, the device will start to work. Move the slide forward to extend the blade, backwards to retract Rotation of the cam moves the slide forward and back The triggering line needs to be strong and thin. I used 26-gauge stranded wire. There are two bumps in the line, one to catch in the cam and another to stop the line from retracting too far. I used small bits of metal tubing clamped to the wire. The line needs to be fixed at the back end with a small rubber band or spring to make it retract after use. The other end is attached to a ring on the user's finger
Đã xuất bản bởi:
Creazilla
Nguồn: Stuart Ferguson on Myminifactory

Loading...

34 tải xuống
Định dạngSTL
Size47 x 47 x 7.4
Print ReadyCó
vũ khíin ấnmelee weaponsstl daocosplayfan art

THÊM NHƯ THẾ NÀY

Creazilla logo
Hơn 10 triệu tài nguyên đồ họa miễn phí dành cho người sáng tạo và thiết kế nội dung
© 2018 - 2025 Creazilla
Tài nguyên của chúng tôiTất cả hình ảnhẢnhMinh họa kỹ thuật sốClip nghệ thuậtBiểu tượngHình ảnh PNGBiểu tượng cảm xúcBóngNghệ thuật truyền thốngMô hình 3DVectơPhông chữTên màuBảng màuMàu sắc chuyển sắcÂm thanhHoạt hìnhVideoMẫu
Thông tinGiới thiệu về CreazillaTerms of useTech teamPrivacy policyLicence Information
Nhận xétContact Us