608 免版税 音轨，用于"工具类"

A rough and raw recording of a mechanic doing some tightening work on a tire.

A few sounds of using a normal metal screw-clamp. The sound has been close mic-ed. Recording equipment: akg c214 / focusrite saffire pro 24.

Using a drill to put a screw into wood with screw resisting at the end.

This is a street vendor in seoul, korea who would cut a sweet snack on the sidewalk with scissors and a large knife. It was recorded on minidisc with a portable sony stereo condenser mic.

Close proximity power drill done in sound booth. No outside noise.

A stapler being used.

Sound of a socket wrench pivoting back.

Recording of a metal saw at a locksmith's shop. Recorded with rode ntg2 and zoom f6.

Extending a telescopic tool, slower this time. A pair of sennheiser me64s into a tascam dr40.

Different tools falling on wood.

Desoutter pneumatic drill going through metal, short. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Billeter klunz 50kg power hammer footpedal triggered. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Seems like a drill, saw, or pressurized air machine of some type. Recorded from a construction site. It's loud, powerful, and definitely can be used in a cinematic score.

Three turns of a ratchet, mixed to sound a bit fuller. Recorded on cubase using an m-audio mic.

Sounds from a construction. (took some sounds from freesound. Org and put them together, hope you like this).

I grabbed a metal mallet (mini sledgehammer) and dropped in on cement in various ways. Lightly and a bit harder. Recorded into my ntg3 in a garage sectioned off. Signal to noise ratio was really good because it was a loud sound. H5 was my recorded. Cleaned some hum using rx4. Boom!. Pretty please, post a link if you use this file. I'm excited to see what you can do with this!. Text me if you want to have fun and talk gear. I love hearing what people are up to!702-860-9869.

A chordless drill being run a various speeds and being tightened and loosened. Recording equipment: akg c214 / focusrite saffire pro 24.

Sound of a bosch screwdriver recorded with a bm-8000 mic, edited on audacity.

Impact wrench working in the open air :). Recorded witch lenovo p2 smartphone.

Spinning a cordless, brushless drill (check empty, no load speeds) at various bursts of different length. Some in 1st gear and some in 2nd gear; in 2nd gear the electric brake is more pronounced. Mic changes position now and again to vary the sound character.

Pulling out and letting go of a metal tape measure so it slaps back into its housing.

Sound of a measuring tape being extended.

Recorded with zoom h1. Working with pieces of wood blocks. Edited with reverb.

Workshop search tool box rummage tools searching wood metal foley.

Poking around in my grandmother's barn - building is approx 140 years old and filled with old tools, furniture and other random things. Recording consists of a lot of rusty metal scrapes and thumps, footsteps on old wood, doors etc. Recorded on a hand-held sony pcm-d50. I've edited out the worst of the wind and other artifacts of my sloppy recording technique, but there may be some still in there.

A somewhat large drill powering up and losing power.

Few month ago neighbor make a renovation.

Pressure cooker recorded with a stereo mic at 48 khz/ 24 bits.

Cutting wood part with electric metal saw.

Recording of electrode welding noise of a tube.

A quartz crystal rod scraped against a steel cup-like object to create the sound of a crystal being inserted into a socket.

Operating garden snips.

A thin file on a bassoon reed tip. Recorded using a zoom h5.

Coal being added to the forge using a shovel, short. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Red hot steel out into water bucket, water boils and steel gets cold. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Holman nc4 pneumatic chipping hammer started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Atlas copco rrc 22f pneumatic chisel hammer used to force hot steel four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Various sounds of hitting an anvil with a hammer.

Two, electrically powered jack-hammers at work with various starts, stops and runs as recorded from inside an apartment. Biographical note: currently work is being done on the balconies of my apartment building. . . This is what one hears for several hours every weekday.

Hitting a metal hammer on a metal big nail thing, i fail to figure out the correct word for the tool being hit here. Extracted from a video (http://img. Youtube. Com/vi/ibovrwev2q0/2. Jpg) by a us government agency, thus public domain. Find many more military sounds in my military sounds pack, also located on freesound. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

An attempt to fill a request for the sound of rummaging through a wooden chest (trunk) filled with wooden toys. . . Gear: zoom h6, xyh-6 x/y capsule (120 degree stereo image), rycote windjammer, mounted on a tripod, late 1800s wooden trunk, various wooden toys/items. Please feel free to leave feedback and ratings. I would love to hear how you put the sound to work.

Chord progression.

Hilti angle grinder 230mm (electric) turned on and running once into steel. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Someone welding part of a car. Senn 416 > sound devices 302 > tascam dr-40 48khz 24bit.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Torch ignited once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

A handheld electric drill with different intervals. Recorded with a rode nt5 microphone in a sound booth.

Recorded using a hand saw to cut plywood in a workshop. No need to credit me, but would like your support by subscribing to my youtube channel: youtube. Com/jvmyka.

The sound of me twisting the end of a pen of novolog insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

The sound of me twisting the end of a pen of lantus insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.