1522 pistas de audio libre de derechos para "Herramientas"

Dropping metal tools on concrete. Recorded in a garage using tascam im2 stereo mic & ipad2.

Using a drill to put a screw into wood with screw resisting at the end.

Me opening and closing a pliers, recorded with an iphone se.

Three turns of a ratchet, mixed to sound a bit fuller. Recorded on cubase using an m-audio mic.

Warming up 3d printer, recorded with zoom h4n. Recoding is unprocessed except normalising trimming.

Poking around in my grandmother's barn - building is approx 140 years old and filled with old tools, furniture and other random things. Recording consists of a lot of rusty metal scrapes and thumps, footsteps on old wood, doors etc. Recorded on a hand-held sony pcm-d50. I've edited out the worst of the wind and other artifacts of my sloppy recording technique, but there may be some still in there.

The sound of me twisting the end of a pen of novolog insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

The sound of me twisting the end of a pen of lantus insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

Gas bottle (20 kg) hit with a hose coupler once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Metal tool.

A somewhat large drill powering up and losing power.

This is a street vendor in seoul, korea who would cut a sweet snack on the sidewalk with scissors and a large knife. It was recorded on minidisc with a portable sony stereo condenser mic.

Sound of a closing wooden garage door.

Sound of a drawer being open from a red toolbox.

This sound was recorded using a zoom h1 audio recorder and edited on audacity.

Alluminium part cutted with electronic vertical saw in workshop.

Few month ago neighbor make a renovation.

A rough and raw recording of a mechanic doing some tightening work on a tire.

A handheld electric drill with different intervals. Recorded with a rode nt5 microphone in a sound booth.

Workshop search tool box rummage tools searching wood metal foley.

Recorded with zoom h1. Working with pieces of wood blocks. Edited with reverb.

Chord progression.

I grabbed a metal mallet (mini sledgehammer) and dropped in on cement in various ways. Lightly and a bit harder. Recorded into my ntg3 in a garage sectioned off. Signal to noise ratio was really good because it was a loud sound. H5 was my recorded. Cleaned some hum using rx4. Boom!. Pretty please, post a link if you use this file. I'm excited to see what you can do with this!. Text me if you want to have fun and talk gear. I love hearing what people are up to!702-860-9869.

A chordless drill being run a various speeds and being tightened and loosened. Recording equipment: akg c214 / focusrite saffire pro 24.

Someone welding part of a car. Senn 416 > sound devices 302 > tascam dr-40 48khz 24bit.

Four pieces of wood chopped with an axe. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Uryu uag50 pneumatic angle grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded impact wrench started four times against a bench. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded needlegun scaler started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Ingersoll rand riveting hammer started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded straight die grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Pulling out and letting go of a metal tape measure so it slaps back into its housing.

A jackhammer backed with a vacuum pulsing against asphalt pavement.

A jackhammer backed with a vacuum working its way through asphalt pavement from a medium distance.

Hitting a metal hammer on a metal big nail thing, i fail to figure out the correct word for the tool being hit here. Extracted from a video (http://img. Youtube. Com/vi/ibovrwev2q0/2. Jpg) by a us government agency, thus public domain. Find many more military sounds in my military sounds pack, also located on freesound. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

Construction or woodworking sound of an electric table saw cutting a piece of plywood.

Seems like a drill, saw, or pressurized air machine of some type. Recorded from a construction site. It's loud, powerful, and definitely can be used in a cinematic score.

Sound of working electric planer.

Cutting wood part with electric metal saw.

Just tapping things around my desk with a screwdriver and jingling the loose change inside a glass jar. I had the mind to use all of the sounds in this file for a kick/snare/hi hat drum rack in ableton live - hence the ranges of frequency from low (jar thumps) to textured highs (loose change) and high (taps. ) i hope these come in handy, please enjoy! - vanszi. Bandcamp - https://www. Vnzi. Bandcamp. Comspotify - https://open. Spotify. Com/artist/0mzsotvcahcvlcqwo9qndgsoundcloud - https://www. Soundcloud. Com/vanszi.

Squeezing a staple gun.

Gas-powered leafblower. Starts in distance, gets closer, then recedes again. Recorded with the zoom h4n in 48k/24bit.

Riding mower in front yard, recorded out front window. Some reflective ambience from front of masonry house. Recorded with the zoom h4n in 48k/24bit.

Cutting a tile of wooden flooring with a handheld circular saw.

Cutting a tile of wooden flooring with a handheld circular saw. Recorded in cluj, romania.

Impact wrench working in the open air :). Recorded witch lenovo p2 smartphone.

Recorded with fl studio 10.

Sample of a dewalt handheld power drill.

Dragging a screewdriver on a metalspring, mounted on a tablelamp. Recorde with zoom h1.

Sound of a robot dying, or shorting out.