5.622 file audio bebas royalti untuk "Logam"

Car door latch open, hollow springy sound of hinges.

Car hood slam hollow metallic sound.

Wire fence shut plastic metal gate.

The sound of a coin falling on the concrete floor.

A more smoother sliding door sound. Sliding door can also be use on window sound.

Couverts s'entrechoquant contre du métal. Typologie:x'' (iteratif complexe). Morphologie:*masse: son unique (répété neuf fois). *timbre harmonique: métallique. *grain: strident. *dynamique:entrée du son franche et agressive.

Industrial, factory, metal, metal-processing, small, machine, switched-off.

Sword sound metal sliding raspando sheathing unsheathing machete iron.

This is the sound produced by introducing a coin into a food vending machine. It's features are: short, high freq, impulsive,. . . It has been recorded with a zoom h2 handy recorder in the area where we can find a set of lockers in tallers (university pompeu fabra, barcelona).

Recording in the cafeteria of pompeu fabra university (poblenou campus). A sound of a metal knife and fork is the main sound and in the background we can hear the typical sound of a cafeteria with a lot of people. It was in the lunch time and the sound have high frecuencies due to the metal contact and middle-low frecuencies due to people talking.

Take 1. A skewer wiped against a metal spatula to try and create a sword effect. Sony ecm-ds70p mic to a sony minidisc mz-n710 acting as a preamp into my edirol ua-25 audio interface.

Metal tram lines 'singing' as a tram approaches.

Recorded in an abandoned factory in dublin.

Knife sliding against the sink creating a unique vibrating ding. Long or short depending on the slide of the knife. Recorded with iphone 6s.

A sound i created on accident while going through some field recordings i took in dr. Evermor's park in north freedom, wi. Reminds me of a drum hit mixed with a flute, although it's just scrap metal. Recorded 10/16/2016, edited 2/16/17.

A sound i created on accident while going through some field recordings i took in dr. Evermor's park in north freedom, wi. Kind of a lo-fi, spacey scrap metal creak over some cymbal-type sound. Recorded 10/16/2016, edited 2/16/17.

Clothes dryer door closing.

Opening closing big heavy metal exterior door.

Old metal lunch box.

A smithy's chimney is opened and closed for ventilation. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Drill press drilling through metal. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Playing with random small metallic objects. Recorded indoor with an at-2020.

Sharpening a knife 2. Recorded with behringer c4 and focusrite scarlett 2i2.

Stomping on a fire escape.

Squeaky metal bolt lock.

This is a sound file of a hand hitting radiator.

Metal rod hitting ground.

A metal gate opening and closing.

Este audio hace parte del foley de "the elephant's dream".

A gong-like tone struck on a hanging shovel head.

Hi frequency metallic woosh \ swish.

Recording of traditional sneaker with hard rubber sole stepping down on glasses on hardwood floor. Moderate room tone present. First takes are extremely near to glasses on floor, then followed by takes done about a meter away and at waist height. Glasses used were a pair of old metal framed earhook with polymer type prescription lens and an all plastic frame "blue light reducing" pair with plastic lens. Recorded on a tascam dr-05 linear pcm recorder around 11pm on 5/20/17.

A soft punchy kick sample.

I thought i would see how many sounds i could get out of my sound buzz. Wav, so i took that click at the end, added reverb and slowed it down about -81 percent. Made with audacity.

A butane lighter being flipped close, making a sharp "ching" sound with a high pitched metallic tone as it reverberates. Works well for closing a zippo also.

Some outside sounds recorded with r-09, water running, small stones being scrambled with broom, ironfence played with little metaldevice. Processed with grain granular in pd. Add. Reverbeastjutland, holme, århus, denmark.

The rumbling roar of an approaching freight train then the whistle and passing cars. Some good screeching from the metal. The train passes and fades. Recorded pretty close but with trees in between.

This is the sound of bullets hitting metal. The sound was originally used to represent a bullet hitting an airplane.

A pile of coins knocked over. Just a repeated layering of chumphri's doubloons.

Second recording of the clanging metal joint on a highway overpass, captured from inside a trolley car (you can hear the jumbled voices of conversing passengers).

Opening and closing a metal filing cabinet drawer. Mono recording from shotgun mic and solid state recorder.

Pulling a chain light switch to turn on.

High-pitched tinkling percussion created by rattling a small metal ceiling tie inside a large metal mixing bowl. Surprisingly beautiful sound.

A ping of a bell of a microwave after microwaving. Wave, 44. 1khz, 24bit, stereorecording device: olympus ls10 with xy-capsulelow-cut: yes (80hz)normalized to -1dbfs. Location: leuphana universität lüneburg, gebäude c5. Lat: 53. 2289894298989lon: 10. 399374961853027. Date: 2013-12-09, 14:00hrecorded and edited by: marlin nöthig, martin tege, david nackethis recording was created in the framework of the seminar "soundscape leuphana (ws13/14)".

Assembling a metal stripper pole.

I found an old metal rake in the hard rubbish, shaking the rake makes a rattle sound.

The sound of a vending machine.

Lighting of a disposable butane lighter. Recorded with a model dm-558b radio shack supercardioid dynamic microphone. Edited with audacity 1. 3 beta, the audio is normalized and compressed, i also used noise removal to get rid of the static in the background.

This is the sound of rain splattering in the spout outside my apartment building. Recorded with: at 4073a, sound devices 702t.

This is a recording of a metal desk creaking with very little movement. I recorded this sound, amplified it, and removed the white noise. That's the only processing this sound has gone through. I'm sure this sound can be modified in many different ways and put to countless uses. Be sure to check out the variations of this sounds from the "creaking metal pack". Recorded with: shure sm57 dynamic microphone. Processed with: audacity. ------------------------------------------------------------------------------------please leave feedback by commenting below. I'd love to hear your thoughts about this sound and what you used it for. If you published your finished compilation to the web go ahead and include a link. If you have any questions or requests feel free to contact me. Thank you. ------------------------------------------------------------------------------------.