1.412 file audio bebas royalti untuk "Modular"

Nice ambient modular synth sounds on repeat.

Drone made with 32hp modular. No effects. Modules:nonlinearcircuits geniebarton musical circuits 2lfoshzłob diode chaosdoepfer a-101-2.

A bassline i made in blok modular, kind of 303 like, 156bpm.

A simple sequence played on a korg volca modular sequeced by and recorded on an akai mpc touch. Volca is a little out of tune as usual. :).

Captured sounds from a bugbrand modular system for use in the make noise morphagene.

Modular chaos techno. Sequenced by nlc jerkoff and nls genie. Modulation by nlc sloth x 2.

Decided to call this sound "electronic modular rhythm" since i found only one other spot on the net with that combination of words. Probably is there some sort of mistake to write like that, but now we are two to make that mistake. This is straight out of the modular. No processing but amplification. Please find a part that loops nice in your ears.

Maybe a little overlong but it was trimmed down from a 45-minute recording. Try slowing it down to like 5% for some good acidic sounds.

Radio chatter made with vcv-rack.

A bass line created with uoki-toki polivoks vcf as sound source and doepfer a-124 wasp as filter. The wasp filter is modulated by dinsync modseq.

A monday sequence. . .

Loopable evolving tones from the 4ms spherical wavetable navigator.

Signal from left intermission.

Mixing something new and something older. Stretching and mixing.

Using field-recording by the freesound user susipekka.

An engine sound (propeller plane maybe?) that i synthesised using my modular synthesiser and a complex fm patch. It is thunderous. Hope you enjoy and please send me a comment if you use it in one of your projects :).

Playing with looping envelopes that create rhythms.

Don't know what to call this patch jet. . .

I'm making loop. Just testing 3 of them. Sounds nice?.

Made this drone a couple days ago time to upload. . .

Some random and a "bad" analog delay.

This was not what i was planning to do. Not at all. But i think this sound was kind of fun. I torment my intellijel μvcf a little. This time i edited the sound a little in audacity (eq, compressor and limiter).

2 voices from a 5 quantussy cell vcv-rack patch.

Right channel the sin-wave. Left channel the output from uoki-toki polivoks vcf when i manually sweep the filter frequency. Resonance at max.

The phonogne sampler can not handle as long samples as morphagene. I descided to make a phonogne version of mithimightbe's sound https://freesound. Org/people/mithimightbe/sounds/407072/.

Three sounds. 1) 2hp sh samples from 25hz bipolar lfo (doepfer a-147-2)2) 2hp sh samples from 25hz looping envelope (intellijel quadra)3) 2hp sh samples from noise generated by barton musical circuits bmc23 decaying analog noise).

Three sounds. 1) bmc 2lfosh samples from 25hz bipolar lfo (doepfer a-147-2)2) bmc 2lfosh samples from 25hz looping envelope (intellijel quadra)3) bmc 2lfosh samples from noise generated by barton musical circuits bmc23 decaying analog noise).

Another sloth lfo test. I wanted to see - expected to see - cyclesrepeating. I don't. I have x controlling frequency and y controllinga filter. This recording is 5 minutes so there should be some repetitiveness. . . It's a regular sloth. . . I see 48 second cycles but they are not the same. Cool. Chaos.

Three sounds. 1) analog systems rs-40 samples from 25hz bipolar lfo (doepfer a-147-2)2) analog systems rs-40 samples from 25hz looping envelope (intellijel quadra)3) analog systems rs-40 samples from noise generated by barton musical circuits bmc23 decaying analog noise).

Three sounds. 1) bastle instruments tromsø samples from 25hz bipolar lfo (doepfer a-147-2)2) bastle instruments tromsø samples from 25hz looping envelope (intellijel quadra)3) bastle instruments tromsø samples from noise generated by barton musical circuits bmc23 decaying analog noise).

Three sounds. 1) make noise function samples from 25hz bipolar lfo (doepfer a-147-2)2) make noise function samples from 25hz looping envelope (intellijel quadra)3) make noise function samples from noise generated by barton musical circuits bmc23 decaying analog noise).

Boink. These are part of a set of "boink" samples i made using a nord micromodular randomly fming to itself. They're really useful for minimal or glitchy techno and tech house. In the spirit of hitting 10000 samples, i've got about 200 more of these, so if you like them get in touch and i can send some more. . .

I'm thinking graphic in this patch. . . Maybe not obvious if you don't have the same picture as i have. . . Anyway. As i realize the same patch on my real synth graphics will be submitted on soundcloud - not here. Maybe i could try to do the graphics in ascii but i dont.

Really simple patch. Cv from nlc sloth to quantizer (doepfer a-156), via attenuverter. Triggers from doepfer a-160(161). But a tone is only generated if there is a change in cv from sloth. Its not 100% generative :-) first there is no cv connected to the oscillators. I connect them one at a time. The noise is also controlled by the same sloth. The analog delay is connected to barton musical circuits (bmc) 4 quadrant multiplier and panner acting as a panner, controlled by nlc jerk off (still a sick name on a great module). The ehh drum sound is generated by bmc decaying analog noise.

1 looping envelope and 2 vclfos in a dance (chain connected). I think its harder for this combination to find a nice pattern - equilibrium. It happens sometimes. Maybe the mixture between positive and negative cv confuses the modules. Makes it harder. I start the recording with one of the vclfos in vco-mode. After about 17 sec i swith to lfo-mode. Records and hope that a pattern should emerge. I have been listening, and looking at the wave form, in different modes, but i'm not sure if there is a pattern in this recording. . . Maybe to advanced for me. There is - some -sort of pattern repeating every 22 sec. Or?.

I have built a nonlinearcircuits sloth lfo, the regular version. Sloth is a chaotic lfo. The output is based on the lorenz system. It is a system of ordinary differential equations. It is notable for having chaotic solutions for certain parameter values and initial conditions. In particular, the lorenz attractor is a set of chaotic solutions of the lorenz system which, when plotted, resemble a butterfly or figure eight (very much from wikipedia). The sloth has two outputs x and y. Think of them as coordinate pairs. The output will probably never repeat itself but there is a pattern. I have built the regular sloth it usually takes approx 15 seconds to make a rough figure 8, one cycle in the “butterly”. The knob changes the chaotic pattern. At some settings the signals will spend more time in one strange attractor than the other. Now i’m testing the module in different ways. In this sound i have connected white noise to a filter. The filter frequency is controlled by sloth (x output). In this patch i have set the initial frequency at 12 o'clock. . . The output sound from filter goes to reverb.

Yep this is a crazy sound. What have i done. . . I have build a nonlinearcircuits sloth lfo. Https://www. Modulargrid. Net/e/nonlinearcircuits-sloth-4hpedited info:i have built the regular version. The sloth has two outputs x and y. I connected x to control frequency on one oscillator and y to control amplitude on another oscillator. Frequency experiment on left channel. Amplitude experiment on the right. The file starts as the amplitude is 0. Next time the amplitude is 0 (almost) is at about 48 sec. Then 48 sec later, at 1:37 the amplitude is 0 again. The two cycles are not identical. The tones are harder to analyze. . . X and y outputs. I guess those corresponds to x and y in a coordinate system. You can find video clips watching the sloth “drawing” butterfly wings. For example:https://www. Youtube. Com/watch?v=0ku6npz1s4gand maybe check this:https://www. Youtube. Com/watch?v=occhcm5oxp8http://nonlinearcircuits. Blogspot. Se/2014/09/sloth-chaos. Htmlthis later link is the developers page. The constructor (andrew) of this module says that my version completes “1 cycle every 15 seconds”. What does that mean? is one cycle one lap in the butterfly pattern? will the pattern repeat itself? yep, i’m going to ask him…. Edit:andrew answers my questions: “it is a very approximate description of the frequency, cycle is not the proper term to use. . . . Nor is frequency really, but they are descriptions that people can relate to easily. Depending upon the pot settings and whatever other initial conditions that happen to be in place, the signal may traverse the typical double strange attractor path. It may stay in one attractor for several loops before crossing over to the other one. The pattern will never repeats itself, it might come close but won't do it. ”my question: so, one “loop” is one cycle?andrew answers: typically it takes approx 15 seconds to make a rough figure 8, but depending upon the pot and other factors, it may take longer, much longer, sometimes it even pauses whilst deciding which way to go next.

Live modular jamb.

Sounds made using noisecraft, a free online modular synthesis environment.

Xor exploration.

Recorded a some seconds from my modular synth and time stretched the result in audacity.

Modular blips.

Experimentations with redsquarev2 synth analo semi modular.

Modular j3rk dual mirro core vco kick bd.

Some creepy drone i made in vcv rack.

Patching with eurorack analog modular synth. No external effect or computers used here.

Patching with eurorack analog modular synth. No external effect or computers used here.

Patching with eurorack analog modular synth. No external effect or computers used here.

Edited sounds from the make noise 0 coast synth.

Chaos controlled sounds from an analog modular synth.