1,162 로열티 프리 오디오 트랙들 "정비공"에 대한

Old compaq presario computer from 2003 booting up, then searching the hard drive. Recorded from the inside of the computer case behind the hard drives. With motorola xt1095.

A recording of ringing a bicycle bell, slowed by 64%. Production stages- first of all we recorded the sound of a bicycle bell, then i imported it to audacity. I cut the beginning as well as the end, adding a constant gain at the beginning and a constant fade at the end so that the sound would be even more harmonic. Then i slightly compressed the sound, and normalized it. Then i used a “noise reduction” in order to get rid of the sound in the background and a slight equalizer. Ce son est de type v- continu varié. Dès le début il augmente avec les vibrations de la sonnette. C’est un son cannelé. Il est harmonique et résonant et ressemble à une cloche, mais est en fait une sonnette d’un bicyclette ralenti à 64%. Il est lisse et comporte des vibrations (vibrato). L’attaque au début est graduelle, douce, clair, riche et saturé. Il y a des variations scalaires qui nous ammenent à un pic clairement montré. C’est un son énergique et joyeux.

Could be used with other machinery sounds to create more of a realistic factory environment. Also creates a perfect loop.

Here are the sounds i recorded:- the "loose parts" sounds were a slightly unscrewed valve on a trumpet. - the hydraulic leg-lifting noise was a hatch door opening on a van. - the metal foot hitting the ground was me banging on a metal garage door. - the humming engine noise (it's quiet) was a roll of duct tape spun on a wooden board. - the various other clanks and pops were the same trumpet noises, just edited a bunch. One day while playing the mobile game crossy road, i my sound being used for one of the characters. If you end up using my sound, let me know! i'd love to know what kind of things it's being used in. This is called "three-legged robot walker with loose parts" because it was a foley assignment for my sound design course years ago. This was one of the obscure things the professor gave the class that we had to interoperate and create using only our own recorded/edited foley effects. The class voted on the best one, and mine turned out to be the winner.

Large commercial oven door opening and closing.

It's some water machinery working in a house basement. Captured with a zoom h2.

A western digital drive refusing to mount. Recorded on a sennheiser me66 k6 microphone, in camera on a sony nex fs700. Hum in the background is the air-conditioned office.

Montagemaschine.

Montagemaschine.

A synthesized, digital oneshot - whirring into a hit. Looped and overlapping.

An electric air compressor running. Recorded with sennheiser mkh 60 connected to an zoom h6. Miked 5 meters from source to get some of the natural reverb.

A reel-to-reel tape being fast-forwarded on a reel-to-reel player.

Great for background noise in a factory or workshop setting, or for a noisy kitchen.

Miked at 3-10" distance. Stove overhead fan recorded powering down, followed by subsequent power-up/power-down [mic was moved closer/further from fan, according to fan speed, in order to minimize air movement against diaphragm]. H4 zoom recorder.

Loop-able. Constant buzz from a slightly broken water pump on a small water feature. Recorded from multiple areas of the fountain. Running water can be heard in the background. Recorded on a zoom h4n recorder.

A machine door shutting down.

This was recorded in my kitchen next to a railway, late at night when there was maintenance going on on the line. A heavy unit called a tamper went past, tamping down the ballast (stones) that go under the tracks. Lots of sub-bass as the whole building gets vibrated and at -04:29 a balanced teapot lid puts itself onto the teapot. Zoom h4n, 24/48 wav exported to flac in audacity.

This is me playing around with my various string instruments. I decided to try to create a creepy string texture-ish sound, but it came out sounding like a haunted string orchestra. I hope you like it. I used a foot-long violin, a full-sized violin, a ukulele, and my father's home-made frettless banjo-thing.

Does this sound need a description?. Noticed that my door was quite loud - so i recorded some sounds of it with my phone close to the moving parts of the door.

Recording of an industrial size single cylinder compressor. Interesting sound at the end of the recording when the compressor have finished its cycle. 96khz 24bit stereo wavtascam dr-100mk3.

I made it using modbox. It possibly could be good for a video theme or something like that. Though it sounds a lot like my other ones. :).

Recording of a bosch refrigerator. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else.

Mechanical metallic sound that sounds like a key. Recorded using the sound of a self-locking pliers. Then processed on audacity for noise removal.

Bike gear sound recorded with a roland r-26. Let me know if you need 4 channels (from directional and omnidirectional mics), this is a stereo mix of both.

A dishwasher in action recorded close with a pair of akg c391b's.

This is a recording of very low frequency hum of a steel mill. The sample has been low pass filtered. The main frequency is about at 25hz. The sound was recorded some distance away of the steel mill area, where it mixed with other sounds as a constant hum, which could be felt in body too at certain spots.

A hand cranked metal spindle machine that takes a long thread and spins it around a spindle to be used for weaving. Recorded on zoom h6 using a sennheiser mkh60 at 48khz. Recordings of the tangaliya weaver comunity in gujarat, india.

Various sounds of a door in an old home being handled, recorded on a tascam dr-05x, some spectral editing and trimming in izotope rx 10 to reduce background sound. Used this file somewhere? please link in the comments - i would love to see!.

Recorded on iphone 12.

Operating a vintage music box.

These are series of various flash bulb pop sounds designed by me for the war-themed short film project. I've decided to create those myself from scratch, because i could not find any proper recordings of those rare vintage flash bulb which were closed lamps that contained a magnesium filament along with oxygen gas that would be ignited and create a significant pop followed by short crackle. Examples and also a reference for these i took from the opening scene of "watchmen" (film, 2009) directed by zack snyder. Materials from soundly pro library.

Sound of my blu-ray player's disk drive opening and closing repeatedly. Recorded on a pixel 4a, cleaned up a little in fl studio 20. This sound is cc0, so use it wherever/however you want, but if you do use it in something i'd love to hear about it in the comments!.

What this is is what you can make of it. Credit is appreciated, but i understand that keeping track is kind of a pain. If you use it in your project, feel free to send me a link! i'd love to see it! :).

Stereo-recording at home from my external hard-disk drive, turning as it is working on a large file, steady with only few variations. Slightly processed.

Amazing screeching sound made by my friend's dishwasher. Sounds like a horrible metal demon thing screaming or something. One of those sounds that the imagination runs wild with, so i wanted to share.

Perfectly looped (endlessly) ticking clock. Based at https://freesound. Org/people/antumdeluge/sounds/188033/.

Just tiuuuuu.

Mechanical movement / activation of a robot/mech.

This is the sound of a small motor (water pump) on a boiler. Recorded in stereo with a sony pcm-d100.

Long form recording session of various tattoo machines at different settings and voltages. Recorded using a zoom h4npro and a pair of usi pros at authentic tattoo company in raleigh, nc.

Rhythmic hum of a construction machine or generator in new york city. Recorded with an iphone.

The sound of a pocketwatch ticking as recorded from the back side. Exactly. 5 seconds long, should loop perfectly.

Single empty shot of machine-gun dshk. Type "klatz!".

Big robot caring boxes recorded with tascam dr 44-wl.

Ambient factory sounds with robotic arms performing tasks. Sounds of metal pieces being hit together.

Robot sound fx.

I recorded me forwarding tracks in traktor.

Cold booting a computer built inside of a milk crate, allowing it to start up and start running a stress test, and then hard shutting it down by flicking the power supply switch. Multiple computers were running in this room and this recording is unedited, so there's some extra background noise. Sorry.

Sound inside dishwasher.

An long escalator i recorded in atlanta. The escalator was very noisy, and produced a kind of whining electrical sound that sounded almost spiritual. I do not know if the transcendent beauty of the escalator is captured sufficiently here, but i figured someone might be able to use it! there are a few faint voices in the background.