407 pistas de áudio isenta de royalties para "Sorte"

Worth mentioning that the groan track is separate from the conversation, for those who want to use just one or the other. I hesitate to say i'm in training, but in a way i am. I don't really know what sorts of things i can get away with, so i have become acquainted with a brit who, i thought, knows everything there is to know. Instead, she may be a bit of an experimenter, and she practices a bit fast and loose. I surely can tell she loves it. . . During this bit of conversation i saw her reach and turn the clamping screws tighter. Extrusion. Interesting. One might wonder why he puts up with it, and i can tell you, he doesn't. A session like this one and he doesn't speak to me for a week. It goes on, i can tell you, at least until he finds where i keep the handcuffs. I do know where to find another pair.

Non-functional tube radio warming up, making a loud 60hz hum with lots of harmonics. As a bonus it clicks off at the end. Zenith consoltone. Only because the faq says so: electro voice n/d 257a through impedance transformer into crappy gigabyte motherboard realtek high definition audio. 16bits, processed at 32bits. Audacity sound editor and/or driver wouldn't record mic level so it was very noisy after amplification. Filtered with a (mathematically equivalent) fft constructed whopping 64k length zero phase filter (blackman window) with 5 wavelength width bandpass at each harmonic from 60hz to 5,520hz. For some reason a fraction of some of the harmonics didn't get through so did another pass on the residual noise and mixed that in. Near the beginning there was a sort of brief duplicate signal that descended in pitch so it didn't make it through the filter. I added that bit in. Attenuated frequencies above 3. 6khz because they are pretty much noise, but removing them didn't sound right. Cleaned up the beginning a bit in various ways, cut it down to 15 sec and carefully appended the unfiltered "click" onto the end, which i denoised 12db with audacity's noise reduction.

Cheerful! ^^. This sound can for example be used in games, for example when the player character encounters someone on the way - maybe a leprechaun? - you name it!. Image by openclipart-vectors from pixabay (licensed under the pixabay license (free for commercial use, no attribution required)!) [2020-08-10]. - links: https://pixabay. Com/vectors/leprechaun-laughing-face-161943/https://pixabay. Com/service/license/. If you enjoyed the sound, please rate, comment, spread! it really helps!. Note: make sure to check out the other matrixxx-sounds! the sound quality is always better when you download the sound(s)! ⛄. Enjoy!/matrixxx.

This is my recreation of the noise in the background of a video shot on a consumer grade minidv camcorder (a well used one). I haven't had a minidv camcorder on hand for a few years and nobody i knew would give me a recording of just tape motor noise so i went to create the noise myself. This sound is a combination of a very badly pressed dvd in my computer's drive mixed with a tone made in audacity (up one octave from the tone that the disc ended up creating), all mixed down and brought down in volume. I know it's not a prefect recreation, but i don't have a minidv camcorder on hand so this is about as good as i can get it. If anyone has access to an anechoic chamber, a fresh tape, and a well used consumer grade minidv camcorder, please get in touch with me. I'd like the real deal better than my recreation that i did in my spare time. Note on recreating the noise out of hdv camcorders. They have slightly different hardware and as such will create different bearing noise (most times, there's an extra whine on top of the familiar bearing whine heard from standard dv camcorders). I forget the exact frequency, but it's somewhere in the neighborhood of 840hz-860hz and it's a sort of sine wave, but a modest bit more jagged. You'll have to provide your own stock camcorder mic hiss as each camcorder is different (not for definite sure on sony camcorders, but canon camcorders have a pink-ish white noise in about that era).

This is the audible annunciation found at all intersections with traffic lights in paris, france. It announces the condition of the traffic lights for pedestrians who are blind or with impaired vision. The annunciation is turned on by pressing a button on the traffic light pole. When the crosswalk sign is red (do not cross), the recorded annunciation is always "rouge piéton" ("red light, pedestrian"), followed by the name of the street that the crosswalk crosses (in this case "rue d'antin," the quiet side street where i recorded this). This repeats over and over until the crosswalk changes to green, at which point there is a two-second trill tone followed by a repeating bell tone. The bell tone is one bell, followed by two bells, repeated four times, followed by a very brief pause, and then the sequence is repeated again. This continues until the crosswalk changes back to red, at which point the "rouge piéton" message resumes. The annunciation continues for at least one cycle of the traffic lights and then stops, unless the button is pressed again. The audio quality of the annunciation is very poor even in real life (it sounds like a wax cylinder recording or something), and can be difficult to understand. This recording accurately captures the poor quality of the annunciation. The volume of the annunciation is also adjusted dynamically based on ambient noise, so there is a slight change in volume on this recording as the system apparently reacts to noise from traffic or something. There is a weak background noise that sounds like some sort of machine, but it wasn't coming from the traffic light and i don't know the source. The recording starts with the crosswalk red, then at about 18. 3 seconds it changes to green, then it changes back to red at about 53 seconds. A car passes at around 48 seconds. Recorded with a zoom h4n, stereo 96 khz / 24 bits, built-in mics, from about ten inches below the tiny speaker in the crosswalk sign housing.

In front of my desk in my room is a wood paneled wall with a cubbie. It's about a foot wide, 10 inches from top to bottom and maybe 7 inches deep. I'm just guessing. Around this cubbie is a border of wood. In the bottom right corner under the border i have jammed one end of an elastic string that used to have glitter on it. It's from a christmas box of chocolates my uncle sent me last year. I stand in front of this cubbie whose bottom is at chin height, (i'm only 5ft1in) so my arms are above my head as i pull this string across the cubbie to the border on the left which acts as my only fret. The string is a few inches longer than the cubbie is wide, but when i pull it it gets longer so my hand is 3/4 along it's length as i pull back and forth across the border to tighten and loosen the string. No matter how hard i pull it never pops loose from it's mooring. The recording starts with me standing up from my chair. In the first part until 01:54 i am playing the string at maybe 30° from horizontal. It has a buzzy quality that reminds me of an african folk instrument i can't remember the name of. From 01:33 to 01:54 i'm trying to imitate a korean folk vibrato kind of thing. In the second part until 02:29 i am playing 45 to 60° from horizontal and it sounds like a full-bodied string bass with no buzz. In the last part beginning at 02:34 i am playing about 75° from horizontal across the top border of the cubbie on the left so it sounds buzzy and african again, and i'm just going crazy goofing around with a crazy bluesy rock sort of rhythm. There didn't seem to be any homemade 1-stringed wall-cubbie basses on this site so here is mine, have fun. I don't play it if mom is home because the living room is on the other side of the wall and she can't hear tv. Also my neighbor can probably hear it in the next apartment lol. Recorded with microsoft lifecam 3000.

This is a sci-fi ambient drone sound i made. It's creative commons cc0, so please treat it as public domain. You can use it in any commercial or non-commercial media for free, no restrictions. For those curious how i made this, i took a quick 8-second drum loop from my pocket operator po-33 (ko) and ran it through a free time-stretching/pitch-shifting program called akaizer. The program's based on old samplers like the akai s1000 that had extremely artifact-heavy time-stretching and pitch-shifting features. If you slow a sound down enough, the final product tends to sound harsh and electric. Akaizer turned my 8-second drum loop into 2 minutes and 38 seconds of harsh, bassy noise, pretty damn close to the final. Then i imported the file (we'll call it file a) into reaper, my daw. Track 1 has reaeq with a high-shelf acting like a low-pass. Its curve is set at 1386. 2 hz, gain at -inf, and bandwidth at 2. In retrospect, i have no idea why i didn't use a low-pass. Track 1 has a send to a blank track 2, which has a fab-filter pro-q 3 high-pass filter with a 12db slope. It's at 320. 57hz, q is 1. 096. After the eq, track 2 has valhalla shimmer set to the black hole preset with no changes. Track 3 is the default file a with valhalla shimmer on the black hole setting, but with two tweaks. Low-cut is at 30hz, high-cut is at 6630hz. Everything else is the same. That's followed by fab-filter pro-q 3 with these eq settings:-0. 72db at 69. 463hz, q at 1. 007. -1. 11db at 536. 64hz, q at 1. 013, dynamic eq (click "make dynamic" and leave everything as-is). The point of this dynamic eq is to give a slight drop in gain in the 500hz region, which tends to get muddy in larger mixes. I wasn't sure if i'd use this for a larger project, and i didn't want build-up in that region from the already large-sounding track 1 and 2. The ocassional eq drops here also adds a warble to the final mix that helps sell an analog, electrical sound. +0. 85db at 3697. 3hz, q at 1. 009. This is to add subtle airiness to the drone. It seems weird to have "airiness" in the 3-4k region, but it's the sort of rumbliness of the sound traveling away and dissipating in the atmosphere after the lowest drone sounds. My volume fader settings for all 3 tracks:. Track 1: -8. 59 dbtrack 2: -6. 46 dbtrack 3: -6. 43 db. On my master bus, i have izotope imager 9 with these settings:. Band 1: width at -100 (mono) for 59hz and below. Band 2: nothing at 60hz to 525hz (width at 0). Band 3: width at 48. 1 for 526 to 1. 4khz. Band 4: width at 49. 4 at 1. 4khz and above. Stereoize is set to 6. 4ms on mode i. And that's it! no compressors or limiters anywhere, since i liked how dynamic the actual tracks were and i figure you can always add your own compressor or limiter to the final if you want. I've also added the original po-33 drum loop on my page, as well as the loop after it was run through akaizer but before it hit reaper in case you want to do your own processing. Enjoy :).