Corvette c5 inox from 2001, recorded with zoon h4n at 24/96, stereo. Car start, accelerate, run r/l and l/r, stop the engine, start again,comes near the h4 in a fixed point, accelerate , screeches, run, stops and close the door.
This sound is recorded directly from one of my original 1938 98cc light motorbikes. This time is a express (manufaturer) sl 102 (type). The noise you hear is all specific. It is the fuel cock on selection, the flooding of the carburettor, suction of the engine, two tries to bring the engine to live with clutch action inbetween. Running on idle and two short openings of the throttle. Engine is shut off by using the decompression lever which is typical for this period of time and two stroke engines. .
A hyundai ix35 can be heard. It is started, runs a bit with isolated revs, and is turned off again. Before and after startup you can hear the car's control electronics. Feel free to use the sound; no attribution required. Feel free to write me in the comments what you used the sound for. Equipment:beyerdynamic mce 86 n(c)zoom h4n. File:wavmono48 khz24-bit.
This is the sound of a 98cc sachs engine of a 1938 light motorbike. It is one of the bikes in my private collection. The sounds reflect the fuel cock switching, flooding of the carburettor, sucking of the cylinder and two tries to bring the engine to life. The sound in between is the clutch lever. The engine is started by pedaling the bike on its stand. Main engine run features idle to half throttle open. The engine is eventually stopped by using the decompression lever which you can hear at the end. This is a true recording of the actual item.
Low distortion, almost surf rock but a bit of country. Or more western than country. Maybe even call it somebody trying to run out of texas into new mexico only for the engine to sputter every few seconds.
This is a plasma pulse engine for spaceships, hover bikes/ boards, etc. The engine starts up at 00. 000 ms. Then stage one starts at 02. 400 ms. Stage two at 04. 800 ms. Stage three at 07. 200 ms. Stage four 09. 600 ms. Then the engine shuts down starting at 12. 000 ms. To change "gears" set position to the stage start then play. To "run" in each stage loop from start time +. 144 to stage end time(next stage start time) -. 083. You may have to figit the numbers. I haven't actually tested any of this. I don't really program any more. But, in theory it should work.
