44 Royalty-Free Audio Tracks for "Metalworking"

Large hammer in bangkok (กรุงเทพฯ). Use zoom 1, 2012. 02. 25 10:00.

(raw audio) hammering sounds made by lightly hitting metal against fingernails.

This short sound clip is from the metalworking shop next door here in tijuana. It has some sections where they hammer twice in a row with two different pitches, it's quite melodic and unique. There is some very light ambient traffic and music noise.

Blacksmithing sounds.

Sounds like someone is hitting a metal plate on a construction site several times. It was synthesized from coloured noise on a modular synthesizer and then a small about of reverb was added.

Forging metalware with means of hammer in the sidestreet of southern chinese chaozhou.

Sound of ferona, prague - store with metallurgical equipment and products. Recorded with tascam dr-05 v2.

Sound of ferona, prague - store with metallurgical equipment and products. Recorded with tascam dr-05 v2.

A few sounds of using a normal metal screw-clamp. The sound has been close mic-ed. Recording equipment: akg c214 / focusrite saffire pro 24.

Vlc ratchet tightened four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Tool-case opened and closed. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Gas furnace is ignited and starts to burn slowly. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

A match taken from the box, light and burned. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Chain pulley pulled up and released four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Leg vise being tightened slowly. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Gas bottle (20 kg) hit with a hose coupler once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Milling cutter noise. Wave, 44. 1khz, 24bit, stereorecording device: zoom h6 with xy-capsulelow-cut: yes (80hz)normalized to -1dbfslocation: leuphana universität lüneburg, construction between vamos and biotop. Lat: 53. 22833754336872lon: 10. 404117107391357date: 2013-11-19, 15:15hrecorded and edited by: julia rehfeldt. This recording was created in the framework of the seminar "soundscape leuphana (ws13/14)".

Air hose coupler removed. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

A smithy's chimney is opened and closed for ventilation. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Fume extractor turned on, running in it's own pace and turned off as heard close to the suction nozzle. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Hitting a metal hammer on a metal big nail thing, i fail to figure out the correct word for the tool being hit here. Extracted from a video (http://img. Youtube. Com/vi/ibovrwev2q0/2. Jpg) by a us government agency, thus public domain. Find many more military sounds in my military sounds pack, also located on freesound. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

Field recording of a busy metal workshop in south wales uk. There is a male vocal in their that i find quite nice.

Wameta tig 1600 started. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Drill press drilling through metal. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Hilti angle grinder 230mm (electric) turned on and running once into steel. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Arboga belt grinder turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Ambience of work in an interior courtyard. Hammering, sawing, different machines, recorded in stereo with the h5.

Billeter klunz 50kg power hammer footpedal triggered. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Full machine cycle of an unbranded air compressor turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Torch ignited once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Desoutter pneumatic drill going through metal, short. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Uryu uag50 pneumatic angle grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded impact wrench started four times against a bench. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Red hot steel out into water bucket, water boils and steel gets cold. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Coal being added to the forge using a shovel, short. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Holman nc4 pneumatic chipping hammer started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded straight die grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Atlas copco r4n pneumatic hammer started four times and it sounds mellow. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Desoutter ts144 pneumatic cutter started once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Ingersoll rand riveting hammer started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Lokomo a 100 kg anvil tapped on the back four times with a hammer. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded needlegun scaler started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Cutting steel. Medium distance. Recorder: tascam dr-60d mkiimicrophone: sennheiser me66.

Atlas copco rrc 22f pneumatic chisel hammer used to force hot steel four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.