2,753 Royalty-Free Audio Tracks for "Work"

Yep, analog filters. . . Everything is analog!no, wait the reverb is digital. And this recording. But the noise that reaches your ears is analog. My little modular synth is playing a patch just for you. Or world is a big ad/da converter!!!. I failed at the fade out. . . Sorry for that.

Bulldozer excavator bull dozer backhoe construction debris removal backup beep, good stereo recording of debris being removed.

Cleaning shower glass doors with a squeegee.

Captured with zoom h1.

This is 1 minute recording of my washing machine working. Recorded with canonlegria camcorder.

Speed bag work at boxing gym. Recorded by zoom h2.

General ambiance of an industrial harbour, work arround a boat. Metalic shoks in a loud industrial environment, two different warning signals. No human voice, dense atmosphere. Etang de berre, france, 2018. Recorded with schoeps ab ortfrecorded on nagra ares bbwave stereo, 48khz, 24bits.

Men working on the floor in the basement.

The sound of the works next to my house.

For my work.

A recording of pneumatic drill surrounded by general work sounds in city.

Final work.

Doing some computer work using a mouse/keyboard in rapid succession.

Soundscape_humfaksound description: a ticket machine prints a ticketswave, 44. 1khz, 16bitrecording device: zoom h2next with xy-capsulelocation: universität zu köln, humanwissenschaftliche fakultät, herbert-lewin-str. In front of the ibw buildinglat: 50. 93681lon: 6. 92536date recorded: 2014-11-18recorded by: rebecca will and edited by: darius thiesthis recording was created during the seminar "gestaltung auditiver medien" (ws 2014/2015) intermedia, bachelor of arts, university of cologne.

I've recorded some men at work in the train station of tiburtina, rome. From minute 5:30 to 8:10 is recorded a train coming, stopping and leaving the station.

No beat melody.

Modular patch ending up in the zoom ms-70cdr multi effect. 2 voices, noise and very much reverb :-). Shoutout to cabled_messhttps://www. Freesound. Org/people/cabled_mess/.

Hilti angle grinder 230mm (electric) turned on and running once into steel. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Coal being added to the forge using a shovel, short. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Desoutter pneumatic drill going through metal, short. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded impact wrench started four times against a bench. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Atlas copco r4n pneumatic hammer started four times and it sounds mellow. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Ingersoll rand riveting hammer started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded straight die grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

The same sound thru two filters. No editing. 100% dry.

Okay i have to find the cycles. The start of a cycle is where the oscillator play in (about) unison. One cycle begins at 1:22. 82. Does it end at 1:57. 35?i might create a track called "selfie in three cycles". . .

Worker with grinder cuts cast iron bath tub. Recorded in the room with zoom h1n.

Stereo recording of a combine harvester working in a field. 24-bit wav, unprocessed.

Radziecki aparat lubitel 166 / nagrane mikrofonem piezoelektrycznymsoviet lubitel 166 camera / recorded with a piezoelectric microphone.

Recorded tascam dr-05xsfx conversion edited: adobe + fxs + mastered.

Recorded by roberto giannessiwith tascam dr100stereolocation : civitavecchia (rome)date : 07 07 2009.

Arboga belt grinder turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Gas furnace is ignited and starts to burn slowly. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Full machine cycle of an unbranded air compressor turned on, running freely and turned off. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Holman nc4 pneumatic chipping hammer started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Atlas copco rrc 22f pneumatic chisel hammer used to force hot steel four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Desoutter ts144 pneumatic cutter started once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

It was recorded in tallers building of pompeu fabra with h202 recorder with a high gain. The sound is short and has a high-pitched tone. We can listen the sound of air-conditioning.

Starting dremel with ceramic tip, machining at low speed, then increasing to 16,000 rpm, followed by shutting down.

A simple phrase "when my work is finished, than i'm coming back for you!" in a dark undead-ish voice. Recorded with a cheap desktop mic and fiddled with in audacity. This is a slightly different version with an echo effect applied in the reversed sample rather than the normal.

Working on a project that requires an electrovalve. While checking if she was working or not, we made this recording. And, actually, she was working.

My neighbour is working at the second floor. Metal hit, pushing heavy stuff, crackings and vibrations by some human body mass at the old wood floor. In the second plan, we can hear passing a train and some cars. Quiet atmosphere with singular acoustic, like a sunday's work.

Sounds recorded from roads of mumbai.

Designed with malstroem and basic 64. Malstroem. Graintable synthesis with "random" lfos and a freeware synth called basic 64, that is often used for the reproduction of c64 sounds. But here, the patch sounds like tools. It's a different synthesis, similar to the subtractive synthesis, but not as easy to handle as e. G. A minimoog synth or a prophet 5.

Lokomo a 100 kg anvil tapped on the back four times with a hammer. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Fume extractor turned on, running in it's own pace and turned off as heard close to the suction nozzle. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Uryu uag50 pneumatic angle grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded needlegun scaler started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Billeter klunz 50kg power hammer footpedal triggered. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Wameta tig 1600 started. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.