1.370 lizenzfrei Audiodateien für "Start"

Piece of a recording made during a thunderstorm in june 8 2008. The rainfall starts with a thunder in the background.

Opening and closing the door of a cloths dryer where closing the door starts the dryer.

It starts with a little click i've recorded, then processed through a granulator called dropout, + a little layer of reverb.

Ambience of audience applauses before the concert starts. Recorded in barcelona in 2007. 48khz - 16 bit.

Skil-brand handheld jigsaw. Some stops & starts, then an extended drone. Recorded indoors using a zoom h4n with built-in mics.

On the train platform in jakarta, indonesia. Portable cassette recorder. March 1994.

Field-recording of a thunderstorm starts with rain and nice rolling thunder. Recorded with zoom h1.

Rain falling in an urban backyard. Starts pretty heavy, then gradually fades down. Recorded with a zoom h2n in stereo x/y mode.

A train leaving scarborough station. (see train engine starts. Wav) for the sound of this train getting ready to leave. - recorded with my zoom h2 -.

Medium size non-window (ground) air conditioning unit starts up, runs, then shuts off.

Recorded in the boqueria market in barcelona, this recordings starts with a man singing and after that we hear other people talking and ambient noise.

Foaming milk in a breville espresso maker with the steamer shallow inside the decanter before the foam starts to rise.

More sounds of my japanese wife masturbating. Starts off a little quiet but becomes louder as she gets close to climaxing.

A bunch of sounds recorded from a car, sounds include door closes, key turns, engine starts and brake shifts.

A jackhammer working outside recorded from inside the lobby. Some starts and stops. Ambient lobby sounds as well.

This is a stereo recording of an ambulance passing by. It starts with wail, yelp, then back to wail again. Hope you like.

H1 zoom. Bells just keeping ringing for many minutes. Starts win one ring and then another one. Stopped recording after a few minutes.

Starts with soft raining, rain gets stronger, at the end a deep thunder far away. Recording with high quality stereo condenser mircophone.

Recording of the elevator 'beep' sound when the elevator starts moving. Recorded in the elevator in the focus: hope engineering building, detroit mi.

White noise sweep, put through a flanger and phaser. It starts at the centre of the stereo field, then pans out wide.

A forest / woodland, during this recording it starts to rain lightly. Recorded on a stereo audio technica bp4025 into a zoom f8 mixer.

There's this woodpecker that likes to bang his head on the aluminum ladder that hangs near the chicken coop. He starts at first light usually.

Gas-powered leafblower. Starts in distance, gets closer, then recedes again. Recorded with the zoom h4n in 48k/24bit.

Distant dry thunder, wind, starts to rain becomes heavy wash then stops. Neumann kmr82i and at2050 in mid/side. Toronto.

This is the sound generated by a leg extension machine once someone starts, and when someone is done using it.

The same as my other fire whoosh sound, but i used a hi-pass eq at the 50hz mark to take out some of the "mud. ". --. This is a quick fire sound i made using qubodup's "swing 25" public domain/cc0 upload on this site. It's a bamboo stick swinging, which i layered and toyed with to get the results here. For those curious, here are the steps. * i took the file into reaper, and slowed the file's playback rate to 31% of the original. * i then duplicated the file three times, for a total of 4 tracks. * track 1 (lowish gas-burner sound):- reverb (drum-room impulse response, a medium-sounding reverb with a slight deadness to it. In free impulse loader reverberate le, stretched impulse to 150% and set attack time to 0. 218s). - eq (-8db bandpass near 200hz, rising back to 0 by the 1k mark. Low-pass applied at 5. 8khz). * track 2 (lowest of sounds, like a bassy gas-burner):- chorus effect. That's it. (specifically acon digital multiply, a free plugin, set to the "romantic" preset). * track 3 (not as low as track 2, but closer to track 2 than 1)- reverb (a large hall impulse response. No adjustments, ie. No increased attack or stretching like for track 1. ). -chorus doubler (free plugin duet, preset: "basic doubler. " same effect as if i had doubled the track and pitched one up 6 cents. ). - chorus (free plugin acon digital multiply, preset: "romantic. "). * track 4 (most flame-thrower, whooshy of tracks. )- reverb (impulse response says "hall medium," but it's a thick, even echo from start to finish. Makes the sound go from its default "whoosh" to a flamethrower noise. - chorus doubler (duet again, preset: basic doubler). - chorus (acon digital multiply, preset: "romantic. "). Master bus:. - compressor (tdr kotelnikov mastering compressor, the free successor to the tdr feedback compressor ii. Preset: punchy. Thresh: -20. 9, soft knee: -1. 5, ratio: 2:0:1, attack: 7. 0 ms, release peak: 165 ms, release rms: 165 ms, makeup: 1. 5 db, output: 2. 0 db. That's it.

Recording starts from inside house, then bit out side. Ends with quick burst of circular saw. Gas man came to dig hole. Mono recording with nt 1.

Actual foghorn of detour reef lighthouse in upper peninsula, michigan. Starts loud then gets quieter as the compressed air runs out. Recorded with a sony pcm.

This recording is a sound-walk exercise for my class. This sound-walk starts within a music building to the outside of the building.

Recorded in my dad's bedroom with lifecam hd3000 webcam. This is a much better recording than my previous oxygen concentrator file, as i hauled my desktop into the bedroom at the other end of the apartment where the machine now is, when i was home alone. The webcam is on the bed about 3 or 4 feet from the machineat the beginning of the file you hear me flip the big switch and the machine comes on with a long on beep and thumps. I edited it to start then. At 00:1. 8 what i suspect is the water pump comes on, though i may be wrong. That's when the gurgling starts though. The machine has a small reservoir for distilled water to moisten the airflow. A cup or two lasts several daysyou'll hear various hisses and thumps in a 15. 6 second cycle as it runs. At 03:03 i flip the big switch to shut the machine off, and it bubbles and gurgles away for the rest of the file, as water i assume slowly perculates back into the reservoir, the bubbling getting quieter and quieter until it doesn't even sound like bubbling anymore, until it finally ticks to a stop. At 03:16 you hear me step as i get my foot loose from the mic cord lol. At 04:13 the furnace shuts down as a car finishes going by outside in the bass register, faint traffic noises and the furnace being the only background noises you'll hear aside from my moving around a couple times, and a faint bluejay at the end. At about 07:00 you can barely hear the machine anymore, but i could hear a faint ticking with my own ears. At 07:04 the furnace comes back on. At 07:08 you'll hear a bluejay faintly calling outside and a car going by outside after, which finishes the file at 07:20. I edited out my walking to the computer to shut the recording down. From wikipediaoxygen concentrators typically use pressure swing adsorption technology and are used very widely for oxygen provision in healthcare applications, especially where liquid or pressurised oxygen is too dangerous or inconvenient, such as in homes or in portable clinics. Oxygen concentrators are also used to provide an economical source of oxygen in industrial processes, where they are also known as oxygen gas generators or oxygen generation plants. Oxygen concentrators utilize a molecular sieve to adsorb gasses and operate on the principle of rapid pressure swing adsorption of atmospheric nitrogen onto zeolite minerals and then venting the nitrogen. This type of adsorption system is therefore functionally a nitrogen scrubber leaving the other atmospheric gasses to pass through. This leaves oxygen as the primary gas remaining. Psa technology is a reliable and economical technique for small to mid-scale oxygen generation, with cryogenic separation more suitable at higher volumes and external delivery generally more suitable for small volumes. [1]at high pressure, the porous zeolite adsorbs large quantities of nitrogen, due to its large surface area and chemical character. After the oxygen and other free components are collected the pressure drops which allows nitrogen to desorb. An oxygen concentrator has an air compressor, two cylinders filled with zeolite pellets, a pressure equalizing reservoir, and some valves and tubes. In the first half-cycle the first cylinder receives air from the compressor, which lasts about 3 seconds. During that time the pressure in the first cylinder rises from atmospheric to about 1. 5 times normal atmospheric pressure (typically 20 psi/138 kpa gauge, or 1. 36 atmospheres absolute) and the zeolite becomes saturated with nitrogen. As the first cylinder reaches near pure oxygen (there are small amounts of argon, co2, water vapour, radon and other minor atmospheric components) in the first half-cycle, a valve opens and the oxygen enriched gas flows to the pressure equalizing reservoir, which connects to the patient's oxygen hose. At the end of the first half of the cycle, there is another valve position change so that the air from the compressor is directed to the 2nd cylinder. Pressure in the first cylinder drops as the enriched oxygen moves into the reservoir, allowing the nitrogen to be desorbed back into gas. Part way through the second half of the cycle there is another valve position change to vent the gas in the first cylinder back into the ambient atmosphere, keeping the concentration of oxygen in the pressure equalizing reservoir from falling below about 90%. The pressure in the hose delivering oxygen from the equalizing reservoir is kept steady by a pressure reducing valve. Older units cycled with a period of about 20 seconds, and supplied up to 5 litres per minute of 90+% oxygen. Since about 1999, units capable of supplying up to 10 lpm have been available.

It is a sound that has some pauses that starts a little loud but decreases in volume. It has to be activated by rubbing the broom with a flat surface.

Recording of a slow stroll on utica ave in brooklyn. It starts with gospel music spilling out onto the street.

A shower is turned on and a person starts whistling while showering. After a while the shower is turned of and you hear a sound from the shower curtain.

The coins drop in, there's the high-pitched digital ping to count them, and then the suck of one of those commercial drive-up vacuum hoses starts.

Recorded on iphone 12 of a dual-blade window fan where on of the fans/blades starts off stuck, squeaks, until it catches up to the other.

Mono field recording of the subway - ttc - in toronto, ontario, canada. Station announcements can be heard, but aren't legible. Includes subway chimes. Subway car stops and starts at three stations.

A short on the fly rhythmic improvisation on ghatam and morsing. It starts out on a duple meter and slowly moves to a triple meter.

A sharp crack of thunder from an approaching storm, so there is no rain or wind in the recording. The kind of strike which starts fires in tinder.

Start sound of mac ii iix iicx iici se/30. Create by dissessemble rom code and use wave table algorithm write c program write wav file. C program below:. /* mac_ii. C *//* boot beep mac ii *//* 2558/09/06 */. #include. #define knumber_samples 30000#define kdelay_note 300#define kwave_table_value 0x30013f10#define ksample_rate 22257 // hz. Void preparewavetable( unsigned short *wavetable, unsigned int value );void updatewavetable( unsigned short *wavetable, unsigned short chiso );void savesound( char *filename, short *sounddata, unsigned int numberframes, unsigned int samplerate );. Int main () {. // ---- wave tableunsigned short wavetable[256];// ---- sound data, stereoshort sounddata[knumber_samples << 1];// ---- increment array (16/16 bit fix point integer)int arrayincrement[] = {3 << 16, 4 << 16, (3 << 16) + 0x2f2, 6 << 16};// ---- prepare wave tablepreparewavetable( wavetable, kwave_table_value );. // ---- array phase (16/16 bit fix point integer)unsigned int arrayphase[] = {0, 0, 0, 0}; // set all = 0. Unsigned int samplenumber = 0;while( samplenumber < knumber_samples ) {. // ---- calculate sampleunsigned int channelleft = 0;unsigned int channelright = 0;unsigned char notenumber = 0;while ( notenumber < 4 ) {// ---- see if should update phase for note, only do if play noteif( samplenumber >= notenumber*kdelay_note ) {// ---- up date phase beforearrayphase[notenumber] += arrayincrement[notenumber];// ---- not let out of range [0; 255]if( arrayphase[notenumber] > 0xff0000 ) // 0xff0000 == 255 << 16arrayphase[notenumber] -= 0xff0000; // return to begin of wave table}unsigned short mauvat = wavetable[arrayphase[notenumber] >> 16];. // ---- add sound componentsif( notenumber < 2 ) // ---- first 2 notes left channelchannelleft += mauvat;else // ---- last 2 notes right channelchannelright += mauvat;// ---- next notenotenumber++;}// ---- save left and right samplessounddata[samplenumber << 1] = (channelleft << 9) - 0x8000; // use << 1 for 16 bitsounddata[(samplenumber << 1) + 1] = (channelright << 9) - 0x8000; // use << 1 for 16 bitupdatewavetable( wavetable, samplenumber & 0xff );samplenumber++;}// ---- save wav filesavesound( "mac ii. Wav", sounddata, samplenumber << 1, ksample_rate ); // multiply 2 because stereo. Return 1;}. Void preparewavetable( unsigned short *wavetable, unsigned int value ) {. // ---- prepare wave tableunsigned short index = 0;unsigned short wavetablevalue = value & 0xff;while( index < 64 ) {wavetable[index] = wavetablevalue; // << 8; // for 16 bitindex++;}. Wavetablevalue = (value >> 8) & 0xff;while( index < 128 ) {wavetable[index] = wavetablevalue; // << 8; // for 16 bitindex++;}. Wavetablevalue = (value >> 16) & 0xff;while( index < 192 ) {wavetable[index] = wavetablevalue; // << 8; // for 16 bitindex++;}wavetablevalue = (value >> 24) & 0xff;while( index < 256 ) {wavetable[index] = wavetablevalue; // << 8; // for 16 bitindex++;}}. Void updatewavetable( unsigned short *wavetable, unsigned short index ) {// ---- get value from wave tableunsigned short value = wavetable[index];// ---- calculate new value for wave tableif( index == 255 ) { // careful at last element of wave tablevalue += wavetable[0];value = (value >> 1);wavetable[0] = value;}else {value += wavetable[index+1];value = (value >> 1);wavetable[index+1] = value;}. }. #pragma mark ---- save wavvoid saveheader( file *filename, unsigned int samplerate );void savesounddatainteger16bit( file *filename, short *sounddata, unsigned int numbersamples );. Void savesound( char *filename, short *sounddata, unsigned int numberframes, unsigned int samplerate ) {// ---- open filefile *file = fopen( filename, "wb" );if( file ) {// ---- "riff"fprintf( file, "riff" );// ---- length sound file - 8unsigned int lengthsoundfile = 32;lengthsoundfile += numberframes << 1; // một không có một mẫu vạt cho kênh trái và phải// ---- save file lengthfputc( (lengthsoundfile) & 0xff, file );fputc( (lengthsoundfile >> 8) & 0xff, file );fputc( (lengthsoundfile >> 16) & 0xff, file );fputc( (lengthsoundfile >> 24) & 0xff, file );// ---- "wave"fprintf( file, "wave" );// ---- save headersaveheader( file, samplerate );// ---- save sound datasavesounddatainteger16bit( file, sounddata, numberframes );// ---- close filefclose( file );}else {printf( "problem save file %s\n", filename );}}. Void saveheader( file *file, unsigned int samplerate ) {// ---- name for header "fmt "fprintf( file, "fmt " );// ---- header lengthfputc( 0x10, file ); // length 16 bytefputc( 0x00, file );fputc( 0x00, file );fputc( 0x00, file );// ---- method for encode, 16 bit pcmfputc( 0x01 & 0xff, file );fputc( (0x00 >> 8) & 0xff, file );// ---- number channels (stereo)fputc( 0x02, file );fputc( 0x00, file );// ---- sample rate (hz)fputc( samplerate & 0xff, file );fputc( (samplerate >> 8) & 0xff, file );fputc( (samplerate >> 16) & 0xff, file );fputc( (samplerate >> 24) & 0xff, file );// ---- number bytes/secondunsigned int numberbytessecond = samplerate << 2; // multiply 4 because short (2 byte) * 2 channelfputc( numberbytessecond & 0xff, file );fputc( (numberbytessecond >> 8) & 0xff, file );fputc( (numberbytessecond >> 16) & 0xff, file );fputc( (numberbytessecond >> 24) & 0xff, file );// ---- byte cho một khung (nên = số lượng mẫu vật * số lượng kênh)// ---- number bytes for sampleunsigned short bytesoneframe = 4; // short (2 byte) * 2 channelunsigned char bitsonesample = 16; // shortfputc( bytesoneframe & 0xff, file );fputc( (bytesoneframe >> 8) & 0xff, file );. Fputc( bitsonesample, file );fputc( 0x00, file );}. Void savesounddatainteger16bit( file *file, short *sounddata, unsigned int numbersamples ) {fprintf( file, "data" );unsigned int datalength = numbersamples << 1; // each sample 2 bytefputc( datalength & 0xff, file );fputc( (datalength >> 8) & 0xff, file );fputc( (datalength >> 16) & 0xff, file );fputc( (datalength >> 24) & 0xff, file );unsigned int sampleindex = 0;while( sampleindex < numbersamples ) {short shortdata = sounddata[sampleindex];fputc( shortdata & 0xff, file );fputc( (shortdata >> 8) & 0xff, file );sampleindex++;}}.

Recorded inside the fireplace while the bird hammered the metal cap on my chimney. He starts and stops a few times, and squawks once.

Robotic computer voice saying self destruct sequence has been activated, please evacuate this facility immediately, then a countdown starts. Created with natural reader text to speech software.

Male sounding "robot"-voice countdown from 10-1. Starts with the sentence "self-destruct in. . . "syncs to 115bpm.

Sound of tractor on landfill. Tracktor starts working crushing garbage. Sounds of beeps during reverse gear. Recorded on zoom h4n using røde ntg2 microphone. No post processing.

Its night time in cambodia and a dog close by our house starts barkingthis file was recorded with an zoom h1.

Group kmm-sample starts out with some noise from hitting a plastic case. After that the case is then slide down a metal pole. Recorded with a zoom h4 handheld recorder, high gain.

Stereo recording of a vintage race car. Engine starts and the engine revs.

Stereo-recording at home from my external hard-disk drive, power is switched on and the disk starts to spin until it stops.

You here crickets at night at wadi bani khalid in oman. Suddenly a muezzin starts singing far away and hardly to hear and all crickets stop.

Busy post work street in singapore. Starts with exit of underground onto street, walking footpath to wait at traffic lights and crossing street with traffic is stopped.

You know the sound effect when you bump into a microphone and it starts acting out. I decided to digitally create the effect in audacity! feel free to use!.