3,412 Royalty-Free Audio Tracks for "Audacity"

This replica of my tinnitus was created using the free program called audacity. Http://audacityteam. Org/i had to generate 3 different 'tones' and combine them before i felt the high-ish noise was close to what i hear. I then had to search freesound for something that i only hear beneath the high pitch noise when my house is very quiet, which is something like the sound of strong wind outside a closed window or a power station a mile away. It took me a few hours, and even then i had to manipulate the sound considerably. Thanks to felix. Blume forhttp://freesound. Org/people/felix. Blume/sounds/167684/#commentsthis natural wind sound file was equalized and leveled several times, then the sound level was reduced to blend with the high pitch. But it still wasn't right. So, not being an expert with audacity, i just went down the list of 'effects', trying each one, until i found "paulstretch", which somehow increases the time length of your sound file, without stretching as in 'elastic', which would deepen the existing tones, and apparently, without copying and pasting. The sound does change somewhat, becoming just slightly ragged, but it's a very interesting effect for this application and actually got used on both elements to produce the final sound. . I hope no one enjoys this sound and can't imagine that anyone will. It makes me feel slightly sick. . Info edited 28 oct 2021: with my tinnitus at it's current level, i will never, now, be able to reproduce it again, primarily because i can't hear any sounds i create in a detailed way. And secondly, because hearing this version of the sound these days is just too uncomfortable. 🥲.

Plastic 2-liter sprite bottle bonking my head in various places. Bottle cap is screwed on tightly and label is intact. Recorded indoors with my sound blaster recon3di internal microphone array via audacity 2. 0. 6. Audible narrations included between and as part of the following list of subclips. 0:00-0:12 - bottom (harder end) of the bottle on the middle top of my head0:12-0:27 - bottom of the bottle against the side of my head above and behind my right ear0:27-0:41 - middle of the bottle (label) on the middle top of my head. 0:41-0:53 - cap end against the middle top of my head. .

Interpretation of a modern vertical fighter jet landing as a sci-fi starship landing. Few audacity edits. Based on audio extracted from a video (http://img. Youtube. Com/vi/ktg5ekotr_m/2. Jpg) by a us government agency, which is thus public domain. This sound is cc0/public domain but i highly recommend that you include a link to this page when using it, to avoid misunderstandings. Find many more military sounds in my military sounds pack, also located on freesound. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

What if we could hear sounds from another planet ?. In this imaginary place, people can visit zoos under water. Here is the sound of a yhtem, recorded by a visitor from inside his personal submarine. The recording device was found by a member of the zoo staff, as it was floating over the water. It gave no more informations about what happened to the visitor, except that according to several monster's specialists, the yhtem « sounded hungry ». In the real world, this sound was created using the sound of a very brief scream. At the background was a noisy street, and some cars were passing by. I used two different screams and mixed them, before decreasing speed and tempo in audacity. -. Xson « cannelé ». Le son « d'arrière plan » est étouffé, plutôt doux, mais il y a des « accents » rugueux, acides, lors du grognement. L'attaque est graduelle. On distingue quelques notes, différentes hauteurs. Variation scalaire.

Hello all,. I do hope that i am doing it all okay by the book, and if it is picked by the moderator, than do enjoy the file, thank you. Process :i did download a cc open scream file from freesound. Org. I imported that file to my ableton live. I reverse the sample and shorten a little. From the sample window i changed flux and grain values to bring out uneasy tones in front. I did make two other copies of the sample and played them all in same sequence, with slight different transpose values. I rendered it out and from the rendered file i did do further cleaning with audacity and export mp3 file for final. Here is the original sound http://www. Freesound. Org/people/claracarpintero/bottom one (female scream). Thank you kindly.

Soundscape of a city street in chicago during winter. Sunday, january 31st 2016 at 6:05pm. Continual planes, trains, and cars passing. Occasional pedestrians. Cta "l" trains audible at the nearby thorndale red line stop. Mic: core sound tetramicrecorder: zoom f8. Converted to b format using vvtetravst, then processed to stereo as wide cardioids at + and - 45 degrees using ambisonics toolkit (atk). Light noise reduction applied using izotope rx 7 spectral de-noise. High pass filter applied to reduce low end rumble. Some editing done to remove wind buffeting. Please note that this is a 48k 24bit flac file - flac files can be easily read and converted by audacity [https://www. Audacityteam. Org/] and reaper [http://reaper. Fm/], among others.

[demon spirit, arigatou gozaimasu, saying thank you in japanese. Wav]. Made this with audacity! ⭐. Cute tiny lil kid, arigatou gozaimasu, saying thank you in japanese. Saying " arigatou gozaimasu ! 🙏 "which means thank you in japanese / a kind way to express gratitude. Arigatou can also be pronounced arigato. Gozaimasu can also be pronounced gozaimas. Correct if im wrong or missed something 🙏. This sound can for example be used in cartoons, games - you name it!. If you enjoyed the sound, please star, comment, spread the word!🗣 it really helps! 🎯. Note: make sure to check out the other sounds! the sound quality is always better when you download the sound(s)! ⭐. More content otw!/matrixxx aka lil mati.

I built it because i could. It is fitted with gliding linear slide carriage bearings, has a counterbalanced offset crank with needle bearings, a jackshaft to drive it from a variable-speed dc motor, and even a variable stroke length (which was tricky). Above all it has something i haven't seen in any of the machines one can buy, a bendable, collapsible coupling that would prevent injury to whomever is on the receiving end of the stroke. Clearly it will never be placed into production as it would cost too much to sell at a typical consumer price level. May all be for nothing because i can't get anyone to let me try it out, and i'm only accepting female applicants from among people i know. It's my machine. Sue me. This file is a 30-second-plus repeat of "v1-reciprocating machine. Wav. " downloading that file and using the repeat feature in audacity will generate any length file you please.

One of the most haunting sounds that i have ever captured. I got on the bus one day and didn't notice anyone on there when i sat down, and then a few moments later, i started hearing this sound. I was confused as to what to do. Do i turn around and look at this laugh-er in the face? what would a person laughing like this do to me if i looked at them? how could a person even laugh like this? it doesn't sound physically possible. As more and more people got on the bus, i saw nobody looking in his direction either. Am i maybe imagining this sound? is there a tiny many laughing in my head?. Upon leaving the bus, i looked back and couldn't tell who must have made the sound, but regardless, it still literally shakes me a bit hearing this audio. . . . Recorded with an android phone and edited in audacity.

This sound was created as follows:. -zynaddsubfx free (and insanely amazing) software synthesizer generated simple g tone using a sine-wave adsynth engine- creative sbs 250 speakers played it back distorting the sound naturally and adding some interesting stereo phasing effects (is that caused by analog signal cable being longer for one speaker?)- i was manually changing the volume using the speaker's potentiometer (whitch is dirty and added some interesting noises on the right speaker, and also at peak loudness during the 54th second the right speaker is quiet)- the output was captured by zoom h2's rear mics- and recorded via usb into audacity free audio editing program- i exported the recording as 16-bit flac.

Note: i have created a newer version which has better looping. It is called drum beat loop 2. 0. This is a drum beating. It is 12 seconds long but can be looped. It was createdusing ableton live (including plugins like acdgen, drumbrain, and polyrandom). The files were then combined and edited using audacity. Feel free to comment your opinions on this. Note: while this did loop just fine in my tests, some software don't handle the looping as well (like groove music pauses before repeating). If the looping doesn't work the first time, try using a different software. You can easily do this on a windows pc by right clicking on the file and pressing open with (i am sure there is also a way to do this on a macbook but i have never used one so i am not sure how you would do it). Enjoy!.

[big muscular slimy cool monster, saying thank you in korean 02. Wav]. Made this with audacity! ⭐. Big muscular slimy cool monster, saying thank you in korean. Saying " gamsa hamnida ! 🙏 "which means thank you in korean / a kind way to express gratitude. Gamsa can also be pronounced kamsa. Hamnida can also be pronounced habnida / hapnida. Correct if im wrong or missed something 🙏. This sound can for example be used in cartoons, games - you name it!. If you enjoyed the sound, please star, comment, spread the word!🗣 it really helps! 🎯. Note: make sure to check out the other sounds! the sound quality is always better when you download the sound(s)! ⭐. More content otw!/matrixxx aka lil mati.

Hail comes inthis was a strange storm. Tons of lightning, but only distant thunder. The rain was nearly falling vertically. Audio description: may 20, 2014. Hail comes in and pounds a deck outside for about a minute or so, then fades and raindrops themselves take prominence. The wind picks up, so you can hear wind chimes going at it and some deep rolling thunder far in the background. If you’ve experienced high winds before, it will probably sound scary to you at volume. Recorded with a tascam dr-05 with a dead cat and no low cut. I got the mics as close to an open window as i could without being ridiculous. Cropped and faded in and out in audacity. No other modifications, so you’ll have to normalize it and equalize to your liking. Might be useful as a “heavy rain” sound, since the hail kind of sounds like that anyway.

[cute tiny lil kid, saying thank you in korean. Wav]. Made this with audacity! ⭐. Big muscular slimy cool monster, saying thank you in korean. Saying " gamsa hamnida ! 🙏 "which means thank you in korean / a kind way to express gratitude. Gamsa can also be pronounced kamsa. Hamnida can also be pronounced habnida / hapnida. Correct if im wrong or missed something 🙏. This sound can for example be used in cartoons, games - you name it!. If you enjoyed the sound, please star, comment, spread the word!🗣 it really helps! 🎯. Note: make sure to check out the other sounds! the sound quality is always better when you download the sound(s)! ⭐. More content otw!/matrixxx aka lil mati.

This was recorded by holding a small pcm recorder (zoom h1n) very close to an ipod 4th generation. The ipod was turned on and its hard drive tried to start up. You can hear the spin up of the motor and the hard drive head clicking back and forth. The hard drive fails to power up completely and eventually shuts down again. A 350 hz high pass filter was applied, in addition to audacity noise reduction, to get this clean motor noise from the original recording. The stereo file was then mixed to mono because the mic was slightly off center from the ipod, and the stereo provides no benefit. The hard drive in this ipod is a 1. 8" 40 gb toshiba hard drive, the ipod model is a1059. The microphone was held just 3 cm (1. 2 in) from the ipod. Recording settings were stereo 44. 1 khz at 16 bit (wav format). The file is the same except it's mono.

This recording is inspired by alienxxx http://freesound. Org/people/alienxxx/sounds/345510/made a little patch on my modular, still missing its (main) oscillators. I let the patch sound thru a pair of cheap computer speakers that i use as monitors. In an adjacent room, close to an open window, i put my phone and record. This is the unedited outcome. The recording was made 09:00 (16-05-11). Unfortunately nothing happened outside the window. Even the birds was quiet. I think there is a hint of feedback in the sound? first i planned to record with an old tape recorder, but i couldn’t find it. . . I think this recording should be listened to with low volume. May by it was a mistake to amplify the sound in audacity? but i think there is a nice room ambiance to the recording. Ideas for next time. Use guitar amp. Find old tape recorder. Don’t put recording device to close to window.

The story begins by a music that i found. A open door, heels, then silence, a chair, computer sounds with mouse, retake of music and close of the door. , who is the ending of music too. To produce that, i choose audacity; i take recorded moments of life. For the technique, i choose a fade in and fade out for the music and the recorded sounds fit well together. For the moments of silence, when the work begins, i only let the recorded sound talk without music. I choose to work with two mono audio tracks: on for the music and the other for the daily sounds. Descriptif selon la typologie de schaeffer. 1. Masse : son dit “cannelés”2. Timbre harmonique :3. Grain : rugueux4. Allure : non vibrato5. Dynamique : abrupte6. Profil mélodique : tentatives de variations glissantes7. Profil de masse : son cyclique avec des moments doux puis un peu plus fort.

It's a recording of three emtec cd-rs being broken with bare hands. I had 3 audio cd-r that were burned useless. I decided to record their last sounds. You can hear the cds cracking and breaking, me bending them and trying to break them - they were pretty elastic - i had to learn how to crack them. So at first i had some trouble. Around 0:45 you can hear as i'm bending two cds together they squeak and crackle but don't break. The sound is not edited (hence the tag "raw") - no processing was done - i just truncated the beginning and the end leaving you everything you might need. Recorded with a zoom h2 placed on my bed. I was breaking the cds above it. There was a lot of splinters around, you can hear me fiddle with them from around 2:10 on. Originally wav 96khz/24-bit. Truncated and converted to flac with audacity.

My very first sound effect ever uploaded to freesound. From the swagoontrax™ sound & voices collection, featuring myself and my brother, taj. It's just an average group of people in a bathroom or locker room, cracking jokes, talking to each other, or just pulling gags, on one saying "you fart one more time, and see what happens. . . No, no, no, no, no, no, no, no, no, no, i didn't mean literally. Stop! i didn't mean to! i was just kidding!. . . ", and some fake farting going on outside the ambiance. Enjoy!. This has been created for swagoontrax™ with audacity.

[big muscular slimy cool monster, saying thank you in korean 01. Wav]. Made this with audacity! ⭐. Big muscular slimy spiritual alien monster, saying thank you in korean. Sounds like the protoss from starcraft. Saying " gamsa hamnida ! 🙏 "which means thank you in korean / a kind way to express gratitude. Gamsa can also be pronounced kamsa. Hamnida can also be pronounced habnida / hapnida. Correct if im wrong or missed something 🙏. This sound can for example be used in cartoons, games - you name it!. If you enjoyed the sound, please star, comment, spread the word!🗣 it really helps! 🎯. Note: make sure to check out the other sounds! the sound quality is always better when you download the sound(s)! ⭐. More content otw!/matrixxx aka lil mati.

A recording of flushing the toilet’s water, followed by a groaning door closing sound. Production stages : this sound was originally recorded by a group of students at university lyon 3. Then it was imported to audacity where few modifications were made. First of all, the record was precisely cut so there are no human voices in the background. Then, the sound was normalized and slightly compressed before applying the noise reduction effect. Last, but not least a constant gain was added at the beginning and lightly fading effect took his place at the end. Son du type x (continu complexe)c’est un groupe nodal des sons saturés avec une hauteur variée, suivis d’un bruit d’une haute hauteur. Le son est cannelé et constant et finisse par le son de la porte qui est métallique et aigul’attaque du son est rapide et forte, plutôt abrupte. Le grain est frémissement et rugueuxet l’allure est naturelle, désordonnée et aléatoire.

This underwater breathing was created in audacity. To create this sound i generated 2 tracks rhythms on 2 different mono tracks. For the breathing i created a rhythm "click noise" and added the effect "paulstrech". I deleted some moments of silences. I tried to simulate a heartbeat. I generated a rhythm tracks "noise click" and added the effect "echo". I selected in the track a sound wich looks like to a beat, cut the remain and add the repeated effect on the selected moment. I added bass to make the son more organic and reduced the gain. ---. Typologie/morphologie de shaeffer. Ce son est un mélange de continu complexe (x) et d'itération complexe (x''). Masse :son cannelé. Mélange de sons complexes avec des hauteurs. Grain : a la fois rugueux (la respiration) mais aussi lisse (les battements de cœur). Dynamique :l'attaque est plus ou moins violente avec des variations. Profil mélodique :variation scalaire.

Privatedareno2 - 3patches - 3min. A challenge kindly started by alienxxx \(^_^)/. Patch 1: the patch that was… a patch i did yesterday. Got that one for free, so to speak. Patch 2: inspired by distant airplanes. Had this in mind. Now i patched up my idea. The wind (or what you decide to call it) is controlled by alm pip slope. New module – for me. Used an external effect, the zoom ms-70cdr. Patch 3: read about feedback. I decided to do a feedback patch. First i made one using oscillators, but i did not manage to do something nice. So i used filters. The first filters feedback is generating triggers. Oh, yes, and i used my sampler (soundmachines ul1uloop). So three patches. I merged/mixed them together in audacity. All sound unedited. Just normalized and i have applied fade in/out – and mixed them together - as written.

Featured in the game 'noclip vr'!! thank you so so much, reality games online!. This is heavily inspired by the urban myth and/or creepypasta called the backrooms, which have a very distinct atmosphere to them. This is my interpretation. However, this isn't exclusively for backrooms-related stuff! so by all means, if you're simply in need of some interior ambience of any sort, that's also why i made this for you. No advanced processing was used to achieve this sound. I recorded an electrical box in my garage for the buzzing. For the 2nd layer, i turned on some fans in my room, and made a long mono recording of the white-noise. I then split the recording in half, and used each half for the left and right channel, giving it a stereo sound. I then spent an hour leveling all of it because i'm a perfectionist. Yay. Hardware & software used:-audacity-zoom h4n pro (buzzing)-rode nt1 (fan-noise).

I built it because i could. It is fitted with gliding linear slide carriage bearings, has a counterbalanced offset crank with needle bearings, a jackshaft to drive it from a variable-speed dc motor, and even a variable stroke length (which was tricky). Above all it has something i haven't seen in any of the machines one can buy, a bendable, collapsible coupling that would prevent injury to whomever is on the receiving end of the stroke. Clearly it will never be placed into production as it would cost too much to sell at a typical consumer price level. May all be for nothing because i can't get anyone to let me try it out, and i'm only accepting female applicants from among people i know. It's my machine. Sue me. This file is only 2. 6 seconds in length. If you use audacity to repeat it as i did, it will mesh perfectly together to give you any length audio file you want. I did that to produce "v2-reciprocating machine. Wav. ".

[big muscular slimy spiritual alien monster, saying thank you in korean. Wav]. Made this with audacity! ⭐. Cute tiny lil kid, saying thank you in korean. A version of " big muscular slimy cool monster, saying thank you in korean ". Played around with a lotta settings, and also pitch, tempo, speed, etcetera. Saying " gamsa hamnida ! 🙏 "which means thank you in korean / a kind way to express gratitude. Gamsa can also be pronounced kamsa. Hamnida can also be pronounced habnida / hapnida. Correct if im wrong or missed something 🙏. This sound can for example be used in cartoons, games - you name it!. If you enjoyed the sound, please star, comment, spread the word!🗣 it really helps! 🎯. Note: make sure to check out the other sounds! the sound quality is always better when you download the sound(s)! ⭐. More content otw!/matrixxx aka lil mati.

This recording was made in the path of totality of the august 21st 2017 eclipse, in the woods surrounding devil's kitchen lake in southern illinois. It's a stereo extract from a longer, 88 minute b format recording. The purpose of making the recording was to see how the eclipse affected the sounds produced by insects and birds. In this extract, totality occurs exactly 10:00 minutes in; and ends at exactly 12:38. This mirrors the time totality occurred at devil's kitchen lake: from 1:20:27pm to 1:23:05pm central time. Mic: core sound tetramicrecorder: zoom f8. Panorama of the recording site: https://photos. App. Goo. Gl/t2m3esbcm71l4wzza. With thanks to jay needham for being a good host, and guidance on where rattlesnakes like to hang out. Please note that this is a 48k 24bit flac file - flac files can be easily read and converted by audacity [https://www. Audacityteam. Org/] and reaper [http://reaper. Fm/], among others.

Things may be closed but tennis courts still work, and she was dressed for it. The hallway we walked through after, was empty. A lot of them are lately, we used this one. "after" was that once she finished, the visible front door gave her pause. I wasn't done, so we continued with her chest on a desk in the first open room we came to. More daylight in there, too. From the hallway we wouldn't have been seen. I decided not to tell her about the mixed-gender group of five that gathered at the window for a while, nearly two meters away to intently watch us making more of these sweet penis-in-vagina sounds, gathered by my phone, edited in audacity. Her ass was up high and her sunlit, flexing pink point of penetration very visible to our audience, and it didn't take me much longer. Sadly. Tried to make it last. I was wearing my lowered shorts and a bit of a smile. If she'd had a mask on, it would have been the only thing.

It's a fictional replyment for the song 'scarborough fair', it describes a girl has many special power for the man she loves( for the task he gave), but the price( cost) is lose the ability to have children. . . So, she can does everything, but can't be pregnant. The lyric is an example( because my english is poor, so you can change it become better):. She can makes a seamless shirt. She makes it without needle,but she can’t does even simple women make a baby as any mother have done. She can washes in dry well. That’s no water and there’s no rain. But she can’t does even simple women make a baby as any mother have done. She can plows a land with horn. That’s between sea and coastal. But she can’t does even simple women make a baby as any mother have done. The software be used is 'finale 2002', and use 'formatfactory' to change. Mid to. Wav, then use 'audacity' to edit the. Wav file.

Damaged smartphone screen protector being broken and crushed in bare hands (should've used gloves. . . ). Recorded with behringer b-1 microphone into focusrite scarlett 2i2 3rd gen. Into audacity on arch linux at 192 khz/24 bit. The recording was not processed or edited in any way to retain maximum flexibility to sound artists who will use this as an element. This can be useful as a sound effect for freezing or burning or deep-frying or even rain (when slowed down). Thanks to extremely wide frequency range the recording can be cleanly slowed down up to 25% speed. There's clean frequency content up to 80 khz in the recording. In a few places the mic gain was too much and a pop is clipped, but could still be useful for sound of braking or snapping something (bone?). No denoising was applied - perform your own if needed, though the sounds are mostly free of background hum (a bit of pc noise can be heard in the first minute before i turned down the gain).

This sound is a 1-sample long impulse at 48 khz. It covers the whole frequency range with equal power. This is a perfect sample for exciting your guitar amp or reverb unit to capture it's impulse response (ir). You can also play it through a speaker in a reverbant room to capture it's reverb characteristics. Remember that the ir sample will be no flatter than your speaker's performance multiplied by your microphone's performance (frequency response characteristics). The sample has exaclty 1 second of silence, then the impulse, then another second of silence to ensure the impulse will be played clean and untruncated on any sound system or device. My test with ir lv2 convolution plugin have proven, that this sample has absolutely flat frequency response - convolved signal was identical to the source signal. After normalization and sample-alignment of the sound clips i have inverted the polarisatin of one of them and summed them - result was absolute silence, even no hiss was present as a result. This shows the accuracy of the convolution process and proves this sound to be perfect for sampling ir. The impusle was generated with c* dirac ladspa plugin. Created using audacity.

A recording of ringing a bicycle bell, slowed by 64%. Production stages- first of all we recorded the sound of a bicycle bell, then i imported it to audacity. I cut the beginning as well as the end, adding a constant gain at the beginning and a constant fade at the end so that the sound would be even more harmonic. Then i slightly compressed the sound, and normalized it. Then i used a “noise reduction” in order to get rid of the sound in the background and a slight equalizer. Ce son est de type v- continu varié. Dès le début il augmente avec les vibrations de la sonnette. C’est un son cannelé. Il est harmonique et résonant et ressemble à une cloche, mais est en fait une sonnette d’un bicyclette ralenti à 64%. Il est lisse et comporte des vibrations (vibrato). L’attaque au début est graduelle, douce, clair, riche et saturé. Il y a des variations scalaires qui nous ammenent à un pic clairement montré. C’est un son énergique et joyeux.

A water faucet set to drip in a chaotic manner, without much regularity. I put a plastic container lid under that for sound to be more pronounced, but that added crunchiness and now it doesn’t resemble dripping as much. Recorded with redmi note 5 phone, denoised in audacity plus filtered bass out a bit. P. S. I need to say that i foolishly recorded it into an im app and the recording ended up as. Ogg, so it’s not as good as could be. Still i hope there is enough spectral richness left. I should have used a dedicated recording app which writes. Flac files, i just hadn’t thought. Maybe several days later i’ll make a couple of other takes! (update: now i did. ). ———————. I’m still here! i like you guys, i’m just lazy to make sounds and i don’t want to record as much as the quality is not as good when using just phones, moreover that already many many people record various things professionally anyway and share here.

This started out as a good idea for one of my projects but began to have a life of it's own as i rolled up my sleeves and fussed over every detail. As you will hear, this sound file/track embraces panning like their is no tomorrow. You should be able to fold your sounds into it. Either snaking through it with your own panning sounds, or laying your sounds straight down the middle. - you should find several looping points within the 2:28 runtime. Most of the sounds i upload are from songs where i have lost my direction. In sharing them here, i hope someone can pick them up and make them part of something beautiful. I would love to hear what you make of them as it will be a source of inspiration to me. To see the possibilities beyond my own horizon. Everything starts off as a soundbridge project. I occasionally use aria maestosa for midi composition as the sounds are basic and pure. Audacity can't be beat when it comes to clipping. Engine dj is my library manager.

The office chair is a usual one with wheels and black, but been fixed and soldered and painted a lot for over 2 years (don't khow how long this chair was being used by the previous owner. To get the sound i just sit on it, put my phone on a tripod using the apk easy voice recorder pro by digipom, and then started moving with my feet trying for 30 minutes to get interesting sounds out of it, sometimes falling to get one continuous sound, but i never did that so my experience and technique is lacking also i dind't edit in audacity i just recorded send to email and uploaded here. The thing is that i got as a gift from a family friend and me and my dad soldered that thing probably 6 times to fix the sounds,pieces falling off, me geting in the ground after the entire base broked!( i wished i could show the picture in the center down of it) so before i went ahead to fix it again, i decided after talking to friends if i should record and upload, so here it is!. I hope is useful somehow to someone, now i can feel more at ease in repairing this chair again.

As with my other sounds, i prefer quality over quantity. Here is another sound file that i developed over a couple of days. Similar to ss's pulse cannons, this one features a military battle featuring tanks, helicopters, jets, and strafing runs using high caliber chainguns. A lot of explosions and rocket fire is heard as well, and the audio is a bit loud. Sounds edited in audacity, some sounds recorded irl using my dslr camera system, the mixing was done using filmora9. The freesound files used is listed in the sound sources, rest is what i used online and irl. I did this out of boredom while playing shooter games, since i'm working with 3d modeling i'm getting back into making my own sounds for my games. This one is free to use with credit, and with the right editing software you can change the volume if needed. Feel free to let me know if anything needs changing, or if you want a audio commission!. <3. [the quality in freesound's website player doesn't fully show the amount of audio details. It'll clear up and have much more depth when downloaded. ].

//////// made using audacity (only):. Generate 3 wave forms. Saw - 110hzsquare - 220hzsine - 440hz. Pull down the track's volume using the sliderthen mix them all together on one track. Apply a wahwah plugin :freq= 1,5 / phase=0 / dept=70 / resonnance= 5,2 / cutoff freq= 5. Progresively increase the tempo :source tempo to -75% / final tempo to +150% (with dynamic transcient sharpening)source hight to -50% / final hight to +150%. Normalise to -0,5apply short fade in and long fade out. //////// typologie:continu varié (v)(pourrait presque être aussi décrit en tant que série d'impulsions tonique / n' ). ////// morphologie:- masse: son seul- timbre harmonique: riche, puissant et assez agressif (mais adouci par le filtrage)- grain: grain assez "gros" et rugueux- allure: stable, pas de vibrato rapproché, pas de "chevrotement"- attaque: l'attaque est graduelle- profil mélodique: variations à mi-chemin entre scalaires et serpentines- profil de masse / calibre : présence d'un filtrage évolutif intermitent qui adoucit le grain et donne une impression plus "organique".

As of this recording, i am the official town troubadour of manchester, ct, usa. I am just putting the finishing touches on an album collecting the various songs i have written for the town in this role. One of the songs mentions the church bells that ring out every day in at the top of the hill in town, so i thought it would be nice to open that song with a field recording of the bells. Every day at noon, center congregational church in manchester, ct, usa plays a full 10 minutes of music. This is a recording of the full 10 minutes as played on december 4th, 2022 - recorded with a zoom h1n, fades added in audacity. It was quite windy and despite my wind sock, there is the occasional audible gust. I was set away from direct traffic sound, but there is ambient traffic sound. There was also a church maintenance truck that slowly drove past me midway through the recording (probably curious at the strange person with the tripod recorder and headphones). I have not attempted to identify the songs in this recording. But if you recognize any, please let me know!.

A recording of a manual typewriter. The author is inserting paper, typing a paragraph, and then removing the paper. Sound of paper being inserted into the typewriter using the paper platen winder. Then the sound of typing of about 50 words. A small bell sound is heard at the end of each line, then the sound of the platen being pushed back to start the next line, and the platen moving the paper up one line. The sample ends with the sound of the paper being wound through the typewriter and removed. I have tried to avoid clipping of each typed letter. There is a lot of percussive multi pitch sound in each typed letter. There is a mechanical escapement that provides a clicking sound as the platen is moved back for the next line. This sample was recorded direct to the hard drive of this samsung nc10 netbook using audacity set to 44. 1khz and 16 bit in mono. A dynamic microphone was used on a small desk stand about 1 foot (30cm) from the typewriter, the stand being on a different table to the one on which the typewriter was used. The microphone was a fairly cheap make (hitachi hmp606) and was pre-amplified using a maycom mictube preamplifier built into the xlr connector, connected to the mic in port of the samsung nc10 netbook. The mic boost was reduced to zero, and the gain of the maycom preamp was at its lowest setting.

Non-functional tube radio warming up, making a loud 60hz hum with lots of harmonics. As a bonus it clicks off at the end. Zenith consoltone. Only because the faq says so: electro voice n/d 257a through impedance transformer into crappy gigabyte motherboard realtek high definition audio. 16bits, processed at 32bits. Audacity sound editor and/or driver wouldn't record mic level so it was very noisy after amplification. Filtered with a (mathematically equivalent) fft constructed whopping 64k length zero phase filter (blackman window) with 5 wavelength width bandpass at each harmonic from 60hz to 5,520hz. For some reason a fraction of some of the harmonics didn't get through so did another pass on the residual noise and mixed that in. Near the beginning there was a sort of brief duplicate signal that descended in pitch so it didn't make it through the filter. I added that bit in. Attenuated frequencies above 3. 6khz because they are pretty much noise, but removing them didn't sound right. Cleaned up the beginning a bit in various ways, cut it down to 15 sec and carefully appended the unfiltered "click" onto the end, which i denoised 12db with audacity's noise reduction.

It's recording of a passenger train's on duty. You can hear the train's motors, the wheels rumbling against the rails, the wagon connectors hitting each other, when the train stops also people chatting. Near the end of the recording the room acoustics change, because a woman entered the area between wagons where i was standing with my recorded pointed down. I was standing in a narrow passage, where two wagons were joined, between two closed slide-doors. She have opened those so the overall sound has radically changed and i decided to end the recording. Through the entire recording the unit is moving forward, decelerating, stopping, staring and accelerating again repeatedly as it travels stopping at several stations. The recording was done with a hand-held zoom h2. Rear mics used pointed to the ground. I was in the loudest area in the whole train. I was using "low" gain (h2 has three mic gain levels to choose from: l/m/h). Viewed and converted to flac using audacity, the file hasn't been altered in any other way. Originally recorded as a 96khz/24-bit stereo wav file.

. . Inside an intercity express (ice) between stuttgart and mannheim, sitting in an almost empty (three passengers) second-class broad-spaced compartment at around 9 pm. After a shaky first minute an even part follows for around 90 seconds. Interrupted by some road holes the steady sound continues, now with the frequency of the engine sound rising until the beginning of the fourth minute. Here the "main part" begins, starting with several moments of acceleration, deceleracion and breaking. From minute 5:15 to 7:35 the train reaches it's peak velocity, with only few bumps. After a short deceleration the train inceases velocity again, reaching a second peak, this time noticeably bumpier. Once in a while you can hear some element of the fitments rattling nervously along the track, depending on the constitution of the railways and the overall situation. During the last two minutes the train keeps on decelerating slowly and continuously until the end. Recorded in stereo with a portable stereo recorder (zoom); enhanced in audacity using a parallel dynamic eq (tdr nova), a compressor (vos density mkiii) and a binaural spacializer (auburn panagement).

**please rate if you like this sound. I appreciate it so much!!**. This is an effect i created with my voice to create a demon growl in audacity using my audio technica microphone. I wanted to create a sound that could be creepy but not too scary for kids or children's stories originally. Ominous, creepy, scary, evil, type sound. This is the original and i uploaded another version with paulstretch added as well. I download from this site often and want to give back! please contact for any requests. You may use this sound for free but please credit me using either tiffany marz or voices of marz. Thank you!! enjoy :). Demon monster ghoul ghost troll ogre creepy scary spooky growl roar halloween scream genii jin jinni jinn evil genie annoyed mad warlock zombie devil hellish hell demons zombies ghosts horror monsters alien creature sci-fi strange voice ominous original effect mystery fiction fantasy ghostly ghoulish fairy-tale villain villainous.

I used audacity to synthesize the five-tone chime made by the montreal metro's jeumont train element 41. Backstory: the train itself was an mr-63 type train modified by canron circa 1971, adding a current chopper to the train's started system. The chopper produced an 'idle' tone at around 45 hz, and as the train departed, five tones at frequencies of 90, 120, 180, 240, and 360 hz. Originally there were 3 'elements' (a set of 2 motor cars and 1 trailer car) with the jeumont-schneider current chopper (element 40, made up of cars 81-579, 80-040, and 81-580; element 41, made up of cars 81-581, 80-041, and 81-582; and element 42, made up of cars 81-583, 80-042, and 81-584). During the early 2000s refurbishments, element 40 was retired from service to provide spare parts for the other elements, which were then connected with elements of 'normal' mr-63 trains. Only the 81-579 car remains from element 40. Element 41 and element 42 were then retired in 2018 when the other mr-63 trains were retired.

Please rate if you like this sound :). This is my voice. I was trying to recreate a similar sound to those of the shrieking nazgul creatures in lord of the rings. They are referred to as different things but overall a creepy, evil, raspy, breathy type screeching sound. I created this with a type of practiced scream on a blue yeti usb condenser microphone. I recorded in audacity and added some reverb, fade in, and fade out. It was originally for a video game voice over audition. I also have the original with no fx if needed. My example/inspiration were the creatures in lord of the rings, fellowship of the ring. They are also called the fell riders and the black wings (when they ride the fell beasts), as well as the shadows, the servants of sauron, and the nine servants of the lord of the rings. The orcs of the tower of cirith ungol call them shriekers. I download from this site often, so i thought i would return the favor :). Feel free to contact me with any other requests!. Apparitions beast black-wings cirith creatures creepy demon evil fellbeasts fell-riders ghosts ghoul halloween hell horror lord-of-the-rings monster nazgul nine-servants orcs sauron scary sci-fi screaming screeching shadow shriekers spooky ungol wraiths halloween.

I won't claim that this is a ghost as i am sure many would debunk, only that i believe it to be. This is an evp i found during playback for something else i recorded in audacity with a usb condenser mic. This happens a lot and i have quite a few. It sounds to me like a voice that is not mine is saying "watch" i cleaned it up as much as i could but this was barely audible originally so i had to bring up the volume a lot which made the noise floor pretty loud. I did some noise reduction to make it sound cleaner. I have personally had experiences that i believe to be supernatural but decide for yourself as you listen or use it as make believe. I have more i will upload when i can including ones from places that have been researched and said to be haunted (taken on my phone). I have to find them but as i come across them or new ones i will share. No need to credit me, i am just sharing this for fun. It creeps me out, and gives me chills so hopefully it does the same for you mwuah hahahahaha! enjoy ;). Evp ghost spirit ghosthunters ghostly spectral haunted ominous whisper voice ghosts spirits hauntings evps creepy spooky weird strange mysterious supernatural paranormal electronic-voice-phenomenon spirit-voices halloween.

This is my recreation of the noise in the background of a video shot on a consumer grade minidv camcorder (a well used one). I haven't had a minidv camcorder on hand for a few years and nobody i knew would give me a recording of just tape motor noise so i went to create the noise myself. This sound is a combination of a very badly pressed dvd in my computer's drive mixed with a tone made in audacity (up one octave from the tone that the disc ended up creating), all mixed down and brought down in volume. I know it's not a prefect recreation, but i don't have a minidv camcorder on hand so this is about as good as i can get it. If anyone has access to an anechoic chamber, a fresh tape, and a well used consumer grade minidv camcorder, please get in touch with me. I'd like the real deal better than my recreation that i did in my spare time. Note on recreating the noise out of hdv camcorders. They have slightly different hardware and as such will create different bearing noise (most times, there's an extra whine on top of the familiar bearing whine heard from standard dv camcorders). I forget the exact frequency, but it's somewhere in the neighborhood of 840hz-860hz and it's a sort of sine wave, but a modest bit more jagged. You'll have to provide your own stock camcorder mic hiss as each camcorder is different (not for definite sure on sony camcorders, but canon camcorders have a pink-ish white noise in about that era).

This sound is a superposition of two records. First, i recorded a coffee machine and cut it to extract just the sound of the money that falls in. Then, i recorded the sound of keys and mix it together on audacity. I wanted to make a sound that can be repeated in a loop. So, i copied the record of the coffee machine to give a rhythm to the sound. I tried to cut the sound of the key perfectly to make a loop with the help of the option “search for crosses with zero”. Then, i added view effects. I have changed the amplification in purpose to bring out more the sound of the coffee machine. I also change the reverberation. Gradually, my sound made me think of a music in a video game that i used to play, rayman. It was difficult to describe what the sound was like, but i liked the atmosphere, so i kept it. Then, a friend told me it made him think of a frog noise, and i liked the idea. Code typologie de schaeffer : v’’précisions morphologie :sur le principe de l’écoute réduite, la morphologie du son peut-être décrite comme étant un groupe tonique car nous entendons plusieurs hauteurs. Le son peut être qualifié d’acide et éclatant. Le son paraît plutôt rugueux. Je dirais que le son est dynamique mais que l’attaque n’est pas brutale mais graduelle au moment où l’on entend le son de la machine à café. Le profil mélodique présente des variations plutôt scalaires. Pour finir on entend des hauteurs de sons parmi d’autre son.

El furruco o furro es un tambor con cuero y una varilla, suele utilizarse en la música tradicional navideña, así como en la gaita zuliana y los aguinaldos. Tambien se utiliza, en algunos pueblos, en la parranda. Está constituido por una caja de madera, cilíndrica y ligeramente cónica, está cubierta por una membrana de cuero seco, vibrante. Fijada al tambor con tirantes metálicos, de modo de poder templarla de acuerdo a las necesidades y gusto del intérprete. En el centro de la membrana va fijada una espiga de madera, de poco más de un centímetro de diámetro, cuyo extremo, romo, va engastado en el cuero, y es atado fuertemente por el lado opuesto de la membrana. Dicha espiga de madera, de unos 7 centímetros de longitud, tiene forma cónica, y va aguzada en la punta. Esto tiene por objeto el que en el extremo libre va colocada una varilla de caña, de unos 125 centímetros de longitud. Esta caña es la pieza que apropiadamente manipulada por el ejecutante vibra con la caja de resonancia, produciendo un sonido ronco, profundo, de registro grave, de gran sonoridad. Pudiera decirse que el furro es el bajo en la ejecución de la gaita y de la parranda. Este sonido fue grabado como parte de una entrevista realizada por rafael rondón, director del grupo "el valle". Se realizó una grabación simple con un celular sony y luego se editó con audacity, se ecualizó y normalizó. Ver la entrevista a rafael rondón en https://musicaqueatta. Blogspot. Com/search/label/gente%20que%20hace%20m%c3%basica. "the furruco or furro is a drum with leather and a rod, it is usually used in traditional christmas music, as well as in the bagpipes of zulia and christmas bonuses. It is also used, in some towns, in the parranda. It is made up of a wooden box cylindrical and slightly conical, it is covered by a vibrant, dry leather membrane. Fixed to the drum with metal braces, so that it can be tempered according to the needs and taste of the interpreter. At the center of the membrane is fixed a wooden dowel, a little more than one centimeter in diameter, the blunt end of which is set in the leather, and is tightly tied on the opposite side of the membrane. Said wooden dowel, about 7 centimeters long, has a conical shape and is pointed at the tip. The purpose of this is that a cane rod, about 125 centimeters long, is placed at the free end. This reed is the piece that appropriately manipulated by the performer vibrates with the soundboard, producing a hoarse, deep, low register sound, with great sound. It could be said that the furro is the bass in the execution of the bagpipes and the party. This sound was recorded as part of an interview conducted by rafael rondón, director of the group "el valle". A simple recording was made with a sony cell phone and then it was edited with audacity, it was equalized and normalized" see the interview with rafael rondón in https://musicaqueatta. Blogspot. Com/search/label/gente%20que%20hace%20m%c3%basica.

Alchemical elements - sound experiences to compare. Hello sound-freaks,. In this pack i share some selected pieces of binaural beats referring to basic elements of ancient alchemy. If you listen, you should use headphone. I start with sulfur:. According to paracelsus (1493–1541), the three primes or tria prima – of which material substances are immediately composed – are:. Mercury (mind)salt (base matter or body)sulfur (spirit). (https://en. Wikipedia. Org/wiki/alchemical_symbol). Here some data for the sulfur binaural soundpieces i've worked with:symbol/atomic number in periodic table/nuclear magnetic resonance (nmr frequencies):s 16 7. 67 163,27 hz (176,01 hz: a series with this frequency may come later). You may listen to binaural variations of sulfur same nmr frequency 163,27 hz hz but different intervals:. Binaural creations of sulfur in these sounds on nmr 163,27 hzyou can read the distance to the core tone from the name of the soundfiles. For comparison with the basic or target tone, i added a sulfur stereo sound of 163. 27 hz as a audio test for you in this pack. Have a nice dayand fun with these compositions,the horst from germany. Some informations about sulfur as a homoeopathic remedy (if you are interested):. Https://www. Britishhomeopathic. Org/charity/how-we-can-help/articles/homeopathic-medicines/s/sulphur/http://homoeopathie-liste. De/mittel/sulfur. Htm.