471 Royalty-Free Audio Tracks for "Chain"

This second sound is a recorded sound of a bike chain, i modified it using some effects :1-normalize2-wahwah effect with-frequency = 3. 3 hz-start phase = 0-depth = 70%-resonance = 2. 5-wah frequency shift = 30%3-melt closingthe final sound gives an impression of a sound under water.

A recording of page turns and riffles. Recorded right up near the grille of the mic so perhaps not the most natural sounding recording out there. 80hz high-pass filter was applied with a 12db an octave slope. Normalized to -3db. Signal chain: cad e100s and a focusrite scarlett 2i2.

3 chain connected looping envelopes slowly finding a rhythm. At the start of the recording i set the tree envelopes at random loop length. Slowly they work their way to a more simple rhythm. Why? at about 2 minutes the rhythm is rather short phrase.

. Wave, 44. 1khz, 24bit, stereorecording device: zoom h2n with xy-capsulelow-cut: yes (80hz)normalized to -1dbfs. Location: leuphana universität lüneburg, cantine meadowlat: 53. 22868436108441lon: 10. 39854884147644. Date: 2013-12-02, 13:00h. Recorded and edited by: falko harriehausen. This recording was created in the framework of the seminar "soundscape leuphana (ws13/14)".

#csd [collabo sound design]. Cuffh4tz (#csd 001). Smashing one part of the cuffz on the other one which lies on a wooden table. The wooden table was chosen to damp the signal and gives it a more solid sound. The chain between the cuffz adds a nice character to the sound. This library consists of 39 samples.

Sound created using the wooden rod inside of my coat closet, and recorded on a zoom h2 recorder. This effect was used to create a sort of dungeon ambiance in a musical track. A decent down some steps, some creepy creaking, a little chain movement action, and it all seemed to fit ok. Check it out here: first trackhttps://brookinthebirchwood. Bandcamp. Com/album/disarm-the-mighty. Edited on reaper.

Lead in groove of a 7" single @ 45 rpm. Recording chain:. Pro-ject primary turntable with an ortofon om 5e cartridge→ onkyo stereo amplifier→ behringer uca202 audio interface→ laptop using audacity. Notched out some motor noise and selectively eliminated or lessened some other noises for aesthetic reasons.

Feel free to use the sound anywhere you want (even commercially). If you can, please, give us feedback. We care. Get the the remaining 146 mb of modern basslines sample pack at our website. Www. Audiowizzards. Com. Made using the amazing mpowersynth + our very own fx chain [which is going to remain our little secret]. Thank you.

I couldn't find a decent heavy iron door/gate sound fitting my needs on freesound. Org so i made one combining 4 different sounds that i got from freesound. Org using adobe audition. . . . I hope you find it useful!. #109710 by tomlija "horror gate"#268233 by ylearkisto (a great big long name in some other language)#199282 by gubodup "big metal chain"197463 by hykenfreak "draw bridge lower".

Processed version of:https://freesound. Org/people/toiletrolltube/sounds/422056/which is itself a processed version of:https://freesound. Org/people/gis_sweden/sounds/417382/. Signal chain was as follows:1) gate (otherwise the quiet parts would have a lot of digital sounding noise after processing)2) spectral processing (frequency reversing) applied using unfiltered audio's specops vst plugin. 3) reverb4) slight compression. Effects 1), 3) an 4) above were applied using ableton live's built in effects.

This is the 1st sound i uploaded online in like four years. I'm shocked no one uploaded a sound like this prior 2020! it was made using layering of crackling sounds, deep drum for base, chain sound effect, and of course a nice swoosh. The end result is a sound that is very crunchy and powerful. Feel free to use it for commercial use, like video games or movies, no credit is necessary yet is always appreciated. Share your work with me! :).

Rode nt4 microphone compare signal-noise of phantom and battery power. Nt4, together with small electrical clock, in bed under all the pillows of the house. ;-). First 48v phantom-powersecond 9 v battery-power. Gear chain: rode nt4 with original xlr cord > sound devices 302 >tascam dr-100 mk2. My conclusion: the battery powered mic nt4 is 0. 5db more quiet. Not very significant. See also; http://freesound. Org/people/klankbeeld/sounds/217695.

1 looping envelope and 2 vclfos in a dance (chain connected). I think its harder for this combination to find a nice pattern - equilibrium. It happens sometimes. Maybe the mixture between positive and negative cv confuses the modules. Makes it harder. I start the recording with one of the vclfos in vco-mode. After about 17 sec i swith to lfo-mode. Records and hope that a pattern should emerge. I have been listening, and looking at the wave form, in different modes, but i'm not sure if there is a pattern in this recording. . . Maybe to advanced for me. There is - some -sort of pattern repeating every 22 sec. Or?.

This is my first recording using my binaural mic. I took a walk to meet my wife for lunch and decided to record it. It was windy outside, and even with the standard foam wind protection, you can still hear some wind rumble. It might be fixed using some low cut filtering but i wanted to post it as is. This take started inside my recording studio and ended in a fairly large avenue with lots of traffic (cars and motorcycles). There is a pause on the recording by 01:59, when i had to change the mic cable position. Signal chain: roland cs-10em (with foam windscreen) > sony pcm-m10 (rec level: manual, at about 3,5; mic sensitivity: low; limiter: off; low cut filter: disabled).

My fmc002 submission!. For this, i generated several sounds from audiopaint (free software) and spectrobits (free vsti), two image->sound synthesis softwares. These sounded interesting but i wasn't sure how to use them. Then i made a drum beat, synth bassline, and some other stuff, rendered the song, used paulstretch to stretch the song out 4x, put it back in the project, added even more stuff to other tracks (mostly timestretched versions of my own samples), rendered the result, brought that render back into the daw, and then reversed it. A lot of effects and automation were also used during all 3 stages of the track's creation. Further, each time i rendered, i used the same mastering chain, so eq and other stuff is being applied multiple times. This brings out some surprising timbres and overtones. Really, the final recording sounds nothing like the sounds i began with.

Hi guys, i'm back. For years i haven't uploaded any sounds except my news themes, (thanks to you for your nice comments and thousands of downloads)now i give you an impulse response i made to check how my mixes would sound on a typical living room audio setup (but listening with headphones). The chain: technics hifi-system, multi-cone speakers, audix reference microphone, focusrite preamps. To use it like intended, just load this file into a convolution plugin in your master insert. You'll hear your mix like sitting. . . Well. . . In my living room. It'll sound muffled to you, that's because i captured the ir and all the reflections with an omni-directional mic and i have thick curtains ;-dof course it can be used as a really, really nice and natural-sounding ambience ir, too. Use it as an aux-reverb).

The sound of going on the bus, getting off and walking to entrance of a university. 0:01 - 0:15 - opening of bus doors and the beeping sound of the bus card. During the bus ride you will be able to hear the soundscape of inside the bus, the bus itself when stopping you could hear the sound of its brakes, you can also hear sound of vehicles coming from outside, there is also a low rumble sound in the bus and voices of people. 0:40 - the sound of the bus announcer telling the next destination in portuguese, cantonese and putonghua. 1:32 - bus door opens and people walking out and the sounds now is different in outside. On the way to university, you could hear vehicles, people talking, key chains, footsteps and the sound of the gates opening and closing. You will also hear at the someone pressing the button for the elevator. Key sounds: key chain, vehicles, people.

Cathedral bells for ukraine. Church bells for peace and justice. The dutch make all church bells ring for the ukraine. Freedom for the ukrainians. The bells from sint jan’s kathedraal (saint john’s cathedral) and in the background the bell from the grote kerk (large church) in 's-hertogenbosch, netherlands march 2 at 2022. 5. 15 pm. Голландці дзвонять у всі церковні дзвони за україну. Свобода для українців. Хертогенбос, 2 березня 2022 року, 17:15. Except that the dutch are collecting money and goods for the people of ukraine, all churches will ring the bells for fifteen minutes today, march 2, 2022 at 5. 15 pm. The first refugees have arrived in our country. Welcome. Hopefully these church bells will go virtual viral, and i hoop that people will help where they can. Date/time: march 2nd 2021, 5:15 pm. Weather: 8c, sun, wind e 2 bft with gusts to 14 km/h, 1021 hpa, humidity 48%. Location; parade, ‘s-hertogenbosch (den bosch), noord-brabant, netherlands (holland), europe. Gps 51. 687467 5. 308463. Gear chain: sennheiser mkh30/50 ms, in rycote cyclone small, windjammer > sound devices 302 >tascam dr-100 mk2. Decoded mid-side to stereo.

My first upload! this sound i made using the zmors synth on my ipad air2 - i used audiobus which is a great routing software allowing many of a lot of awesome sounding synths that are now on ipad and can be played professionally via a usb keyboard controller (very handy for gigging) okay this is getting too wordy. . . I used audiobus overall with zmors in the first slot being routed through the wonderful aufx eq app in the center (effects) slot then ran the most useful of all ---> audioshare app in the 3rd or output slot to record it all. . . Keep in mind that the number of devices you can run in these three slots is virtually limitless - as much as your device can handle so you can get really nuts with several synths, a drum machine, etc all routing to the middle (fx) stop in the chain and picking up a fat 3 or 4 nice sounding effects devices then on to output to audioshare or you can now use just audioshare as host and run zmors in it directly (and probably more smoothly). I chose zmors because on a couple of other ipads (ipad mini, ipad 2 especially, and ipad air a little bit) i was noticing that it was a resource hog and was not playing correctly or there was a huge lag in the latency so with the new(er) ipad air 2 i wanted to hear the zmors synth and it really is an underappreciated majestic sounding beast if you ask me. I am going to experiment further with it as the unique architecture and just the way it sounds is totally different from any other synth i've yet to hear on ipad or in general. It kind of reminds me of a fatter, more modern. Sequential circuits 6 track. Which i've had a couple of and have a thick layered sound - kind of like a really nice turkey sandwich with a good portion of swiss cheese then you notice that there's still some roast beef left and put a good amount of that between bread as well. Hell, that's a sandwich that's gonna be filling! thanks for reading.

Created by divkid for use in the make noise soundhack morphagene. There are dry-only, fx-only, and mix versions of this reel in the pack. See it in action at https://youtu. Be/rk4ufmfcouc. Patch walkthrough. The patch starts with the qu-bit chance providing discrete random values (sample and hold) going into an instruo harmonaig. This takes the stepped random voltages and quantizing them to a given scale. I put in the notes c d eb f g ab bb which is a c natural minor scale, the relative minor of eb major (for anyone that's curious). However like most of my modular work i didn't actually tune the oscillators to anything specific. So treat the scale as a pattern of intervals not a set of specific notes. The quantized notes then form 4 voice chords giving us a root, third, fifth and seventh cv output that will be diatonic following the scale pattern, meaning the third will be major or minor, the seventh major, minor or dominant and the fifth natural or diminshed to suit the scale. With the 4 quantized outputs on the harmonaig these all go into the four oscillators on the synthesis technology e370 quad morphing vco. Each of the e370 oscillators are in the basic morph xy mode using the built in rom b set of wavetables. Wavetables are modulating by various mixes of the befaco rampage, mutable instruments tides, wmd multimode envelopes and music thing modular turing machine. The modulation sources are mixed and split with multiples and mixers. These modulating wavetables then go into a bubblesound vca4p where i'm using 4 mk1 intellijel dixie oscillators all un-synced and free running with sine wave lfos. Each lfo freely fades the voice in and out of the vca4p. As this is unsynced there's no regard to pitch changes linked to changes in amplitude and the swells. I find splitting the gate/rhythm from pitch regarding sequencing to be a freeing and interesting way to work that's not available on traditional instruments. This is just a simple application of that idea with the lfos fading freely unrelated to the other modulation or sequencing of pitch. The sound then goes from the vca4p mix out into a befaco mixer and praxis snake charmer which the output section of the larger case and i'm sending a 'pre' auxiliary out into my fx case. The dry sound first goes into the erica synths fusion delay / flanger vintage ensemble which is giving me short modulated delays giving vibrato like sounds and pushing the input level and overdrive gives us some warmth and grit that thickens up the sound and also fills in the gaps left by the free running lfos pulling quieter sounds and compressing in the on board tube. This then outputs to the feedback 1 bit multitap delay module which has it's delay chip pushed to longer times for some added crackle and noise. I'm using the two delay taps for a shorter and longer delay with little feedback to mix the dry sound for a generally noisier and smeared version of the input. This then goes into the xaoc devices kamieniec with it's on board lfo as slow as possibly for a mildly resonant phase shifting. This goes into mutable instruments clouds set to sew random grains slowly and randomly which are pitch shifted up 2 octaves to fill out some high end flourishes against the closed chord voicings at the core of the patch. Finally this goes into a long lush reverb from the halls of valhalla card in the tiptop audio z-dsp. The stereo fx chain and the mono dry signal are mixed in the befaco hexmix and recorded as a mixed stereo file. I'd consider this to be the main 'reel'. However i split the dry signal and the fx only wet stereo signal and recorded those at the same time so you can choose which reel to use and experiment with dry/wet or blended sounds from this patch.

Calm ambient track. Winter woods / pinewood february 12. 41 pm (noon) in the netherlands near village giersbergen. Bram’s admin request-text and my answer in audio. Hello freesounders,it happens very infrequently that i post requests. However, i have an extraordinary sad reason to do so today. I don't want to go into detail in this public forum, but someone incredibly important and incredibly young in my life and my wife's just passed away. I am thus looking for an extra long recording of a peaceful "forrest ambience" to play during the good-bye ceremony. Something with some birds and perhaps some wind through the leaves,. . . . Currently the ceremony is planned for april 6th so i would need this before then. I know i can look through freesound, but i would like something specifically recorded with this in mind, something we will be able to listen to later as well, remembering this important and sad time in our life. . . Yours in grief,- bram & familywhat you hear;general-noise; soft wind in woods, sometime a bit increasing. A far kid at the edge of hamlet giersbergen. Far hum of the woods. Remark that the far high altitude planes are on a very lo noise level. Off and on craws and woodpeckers. 00. 00-02. 18 clean background-sound02. 18-06. 57 far high altitude plane- 04. 08-05. 42 people passing06. 05- 08. 13 clean background-sound- 07. 15-08. 12 woodpecker08. 16-10. 33 far high altitude plane10. 33-11. 44 clean background-sound- 10. 44-11. 32 (far) woodpeckers11. 33-12. 53 far police serine12. 55-14. 11 clean with some far yelling kids and woodpeckers14. 15-16. 14 far high altitude plane16. 14-26. 11 clean background-sound with some friendly increasing wind gusts- 23. 06-23. 56 woodpeckers- 25. 53-26. 08 woodpecker26. 08-end far high altitude plane and people. More recordings here search: giersbergen. About the area, national park loonse en drunense duinen. (text by irma de potter,ranger of this area) dutch website: https://www. Natuurmonumenten. Nl/natuurgebieden/nationaal-park-loonse-en-drunense-duinen. In the loonse en drunense duinen you will find forest, heathland and especially a lot of sand. It is one of the largest shifting sand areas in western europe. The wind can blow undisturbed in many places, resulting in an ever-changing landscape. By purchasing it in 1921, it has been protected for 100 years and we can still enjoy this brabant sahara today. You can roam freely on the sand plain. So there is plenty of room to explore extensively. Marvel at the submerged trees, enjoy the chirping field crickets and quench your thirst at one of the many cafes or restaurants on the edge of this nature reserve. Walking, cycling or on horseback: it's all possible here. With the wind in your hair and the sand in your shoes. You may even come across the sheep herd. The sheep keep the heath short and eat away saplings. This is how they keep the area open. The loonse en drunense duinen still has 270 hectares of shifting sand. That sand creates rather extreme conditions: the soil is dry and nutrient-poor. The difference in temperature between day and night can be as much as 50 degrees celsius. This ensures a unique flora and fauna. The animals and plants have adapted or feel at home in drought, aridity and temperature fluctuations. Sand sedge and various lichens, for example. And the viviparous lizard, sandpit beetles and sand bees. All species that love sand. In the last ice age, the polar winds blew sand from the north to brabant, where it remained in thick packages. For a long time this sandy plain was covered with primeval forests. Until the fourteenth century the trees were felled by people. They used the wood as fuel. The bare plain was filled with heather, where the farmers grazed their cattle. This intensive grazing and the sod cutting of the soil depleted the soil. This gave the sand free play. For a long time, the sand was a major problem for the residents. Villages and fields threatened to disappear under it. Trees were planted to stop the advancing sand. You can still see the traces of this today: find the submerged trees that only peak above the sand hills with their crowns. Date/time: february 15th tuesday 2017, start 12. 44 pm. Weather: 13c, clear sky, wind se 2-3bft , 1023 hpa. Mic pointed ne. Location; soft-wood-forest giersbergen (drunen), national park “loonse en drunense duinen”, drunen, noord-brabant, netherlands (holland), europe geo 51. 65566 5. 15774. Gear chain: sennheiser mkh30/50 ms, in rycote cyclone small, windjammer > sound devices 302 >tascam dr-100 mk2. Low cut 140hz 6db/octave. Level around -33db for background. Decoded mid-side to stereo.