282 Royalty-Free Audio Tracks for "Dynamics"

Typing (real words!) on a kinesis advantage keyboard with cherry mx brown mechanical switches. Recorded at my desk with rode procaster, triton fethead, focusrite scarlett 2i2 into audacity. Untreated room (hence dynamic mic) but noise remoived with audacity. I needed this for my own purposes so i thought i'd upload it. I hope someone finds it useful :).

A computer fan's quiet ambient noise. Recorded with: shure sm57 dynamic microphone. This sound loops very nicely. ------------------------------------------------------------------------------------please leave feedback by commenting below. I'd love to hear your thoughts about this sound and what you used it for. If you published your finished compilation to the web go ahead and include a link. If you have any questions or requests feel free to contact me. Thank you. ------------------------------------------------------------------------------------.

In this piece, the recording of an acoustic guitar was made,with the technique of listening with one ear from several points and distances, since, as we saw in course 2, doing that is like listening to the way in which the microphone picks up the sound; and that is the specific point where the microphone must be. A dynamic microphone, interface and computer with digital audio station was used.

Water recorded walking in notodden october 3rd 2017. Recording done in static mode and dynamic mode, while standing, walking towards, beside and leaving the running water. The water source was curving beside the road and under a bridge, fading away. Intensity, rythm and acoustic of water and drops changing according to movements of road and body. Microsounds of steps on leaves october 3rd in notodden.

An edited/mixed recording of an actor reading twas the night before christmas as santa claus. Used in a christmas-themed event during the holidays in a us theme park. As the story, itself, is public domain i do ask that the vo is credited from dynamic algorhythm when applicable.

This is an under water recording of some bubbles. I filled up a laundry bin with water, stuck a sennheisser md21 (dynamic omnimic) wrapped in a plastic bag in there (under the water level). I pumped bubbles from the bottom of the bin through a bicycle pump. Gear used: md21 -> m-audio dmp3 -> terratec ewx2496. Completely unprocessed, 2:43 of 24 bit 44khz wave. Submission for the earthfirewindwater contest.

formatted for use in the make noise morphagene. A piano which belonged to my great grandmother. This is from 1873 and sounds unbelievably lovely. Recorded with a dynamic mic going into a doepfer a-119 and recorded by the morphagene. . Note: we have re-formatted this sound to prevent distortion. The higher quality file will be here once it passes moderation:. Http://freesound. Org/people/makenoisemusic/sounds/401011/.

6-minute clip of a thunderstorm with sweeping rainfall in the grass and trees of my back yard in northern colorado. Sounds of annoyed crows and grackles can be heard periodically in the distance, and the ambient sound of water through the gutters and downspouts is also prevalent. Recorded with a tascam dr-60d and two behringer xm1800s dynamic mics. Post processed with amplification and mid eq boost in audacity.

A recreation of a lavalier microphone pop. Useful for reality or documentary where an interviewee may rip off their mic or you simply want to create the illusion of that drama. Also useful to incorporate into a "signal lost" effect, etc. Processed with some limiting so it's tamed and ready to throw in a mix. Recorded with an mxl lsm-3 dynamic mic, no reason to abuse my real lav mics.

A recording of my bathroom ventilation fan shutters clicking in the breeze. The fan is not on so you can hear birds in the distance, and the wind in the tube-shaped fan chamber. When the wind blows it catches the plastic shutters and they rattle and click. Recorded very close to the fan with two dynamic microphones, there is virtually no bathroom ambience detectable. I'd be intrerested to know what this could be used for!.

Fireworks recorded amidst the buildings of an apartment complex. Lowpassed around 1khz. Slightly expanded dynamic range. I cut as many incidental noises as i could hear on my headphones (cars, neighbors, etc) but there's still some residual hum from an electrical box that was nearby as well as wind. Recorder: zoom h1date: 7/4/2017time: 10:00pmlocation: fremont, ca (usa).

This is a recording i made of the ambience at our local diner one man band-- it's a staple of our local culture and still maintains a, "50s diner" kind of atmosphere-- something you can feel in the air when you visit the place-- i hoped to capture that dynamic with this recording-- the sound of utah-- something lost in time and yet so progressional. The sound of a culture being brought to its adolescence.

One of a series of heavily processed sounds i made using a small squeeze toy that just happens to be shaped like a cob of corn. I used s-layer, the sample-mangling plugin from twisted tools, to combine these swishy sounds with various other metallic and synthetic sounds from my own library. The results are dynamic and surprising, and might be useful for certain kinds of unusual ui sound design.

This is a large shed housing a hundred goats owned by a local cheese producer. It's an autochthonous goat breed called 'cabra palmera' (goat from la palma island). Listen to their bells. You can also hear them bleat, even munch some straw if you pay attention. . . Alongside with a chatty rooster. Recorded with a sennheiser cardioid dynamic mic onto a sony pcm-d50.

Formatted for use in the make noise morphagene. Seven chords from my fender rhodes, each on its own splice, centered around a bb-minor root. The rhodes was running through an mxr zw-44 for mild overdrive, and the signal was boosted with a focusrite scarlett dynamic octopre. This reel was originally created for a guest post on the noise engineering blog: https://www. Noiseengineering. Us/blog/2017/9/18/modular-tips-and-tricks-guest-post-rheyne. Here's a video using this reel: https://youtu. Be/cyhpcbu71rc.

One of a series of heavily processed recordings i made using a hikari monos cv. It's a small, highly tweakable synthesizer that's great for drones, resonant pings, and all manner of dynamic electronic sounds. Using s-layer, the sample-mangling plugin from twisted tools, i focused on generating short, punchy impulses that leaned into the resonant character of the original monos recordings. These sounds might be useful for ui buttons, as well as designing modern-retro sounds for games.

A recording of dry leaves skittering across an asphalt parking lot around 2:00pm on a friday afternoon. I feel this recording captures the serene, but sad, sound of dry leaves in the fall being scattered about by a strong north wind. Recording made with the marantz pmd661-oade, and the incredible beyerdynamic me58 microphone. Since this particular microphone is a dynamic microphone, i had to crank my record gain up to 7. I was really happily surprised that the sometimes un-listenable wind-roar and wind rumble is barely noticeable on this recording. . . . . . Emjoy this autumn soundscape.

Squealing sound that switches between the left and the right speaker channels, making an eerie, metallic, and slightly distant effect. This sound is a modification from the sound "creaking metal desk". Recorded with: shure sm57 dynamic microphone. Processed with: audacity. ------------------------------------------------------------------------------------please leave feedback by commenting below. I'd love to hear your thoughts about this sound and what you used it for. If you published your finished compilation to the web go ahead and include a link. If you have any questions or requests feel free to contact me. Thank you. ------------------------------------------------------------------------------------.

X-act heavy metal drum kit==========================drum kit: tama rockstarsnare: mapex maplecymbals: zildjianall were recorded in studio with a sennheiser e835 microphone plugged into a roland juno-g synthesizer. Cymbals need some 15khz eq increase because of the dynamic microphone's treble roll-off. No copyrights, free for all uses. I recommend using native instruments battery to launch the samples. Each of the battery's cells can accept stacked multi-samples, and the kit can be played through an electronic drum kit through midi. Excellent results. Any comments, contact matias: matias. Reccius@gmail. Com.

Your stereotypical wind chime sound effect. Used a lot for transitions into dream sequences and flashbacks in movies and films. I took a very fast recording of someone hitting some orchestral chimes, slowed it down by over 200% and added some harmonic excitement and equalization in post production. Tools used:- usb logitech microphone (no lies, seriously used this $10 mic)- fl studio 12 by image line- vitamin by waves- dynamic eq by izotop. If you'd like me to edit or create any additional sounds for your project, please let me know. I'd be happy to help.

This is a small jam i recorded myself on my diy spring reverb circuit i've built for a friend. It sounds really good with music. In this session, i've only used coninuous triangle/sine/square waveforms and jammed on my for pots: input gain,hp filter cutoff, feedback amount, output gain. I'm sorry if the recording clips sometimes, but there's a big dynamic so i couldnt see how much loud it was. Feel free to take it and use it for sampling or sound design layering.

Sound sources: make noise mysteron (high energy excitation and depth, type and gen extreme cw) and white noise doepfer a-118. High red and blue mixed output. Maths- controlled: mystery excitation; dynamic and adsr. Maths triggered by stepped make noise richter wogglebug. Sound signals passed through 2 channels of make noise dynamix. Summed output to soundhack make noise erbe-verb. Decay controlled by internal feedback loop. Size controlled by wogglebug woggle output. Erbe-verb output into morphagene. Straight playback into reaper. 32bit 48khz rendering. Totally synthetic with no prerecording. Grateful to make noise company (shared system and other modules) and those "awfully compelling" instructional videos on youtube. No financial connections.

This is a recording of a metal desk creaking with very little movement. I recorded this sound, amplified it, and removed the white noise. That's the only processing this sound has gone through. I'm sure this sound can be modified in many different ways and put to countless uses. Be sure to check out the variations of this sounds from the "creaking metal pack". Recorded with: shure sm57 dynamic microphone. Processed with: audacity. ------------------------------------------------------------------------------------please leave feedback by commenting below. I'd love to hear your thoughts about this sound and what you used it for. If you published your finished compilation to the web go ahead and include a link. If you have any questions or requests feel free to contact me. Thank you. ------------------------------------------------------------------------------------.

This is a sci-fi ambient drone sound i made. It's creative commons cc0, so please treat it as public domain. You can use it in any commercial or non-commercial media for free, no restrictions. For those curious how i made this, i took a quick 8-second drum loop from my pocket operator po-33 (ko) and ran it through a free time-stretching/pitch-shifting program called akaizer. The program's based on old samplers like the akai s1000 that had extremely artifact-heavy time-stretching and pitch-shifting features. If you slow a sound down enough, the final product tends to sound harsh and electric. Akaizer turned my 8-second drum loop into 2 minutes and 38 seconds of harsh, bassy noise, pretty damn close to the final. Then i imported the file (we'll call it file a) into reaper, my daw. Track 1 has reaeq with a high-shelf acting like a low-pass. Its curve is set at 1386. 2 hz, gain at -inf, and bandwidth at 2. In retrospect, i have no idea why i didn't use a low-pass. Track 1 has a send to a blank track 2, which has a fab-filter pro-q 3 high-pass filter with a 12db slope. It's at 320. 57hz, q is 1. 096. After the eq, track 2 has valhalla shimmer set to the black hole preset with no changes. Track 3 is the default file a with valhalla shimmer on the black hole setting, but with two tweaks. Low-cut is at 30hz, high-cut is at 6630hz. Everything else is the same. That's followed by fab-filter pro-q 3 with these eq settings:-0. 72db at 69. 463hz, q at 1. 007. -1. 11db at 536. 64hz, q at 1. 013, dynamic eq (click "make dynamic" and leave everything as-is). The point of this dynamic eq is to give a slight drop in gain in the 500hz region, which tends to get muddy in larger mixes. I wasn't sure if i'd use this for a larger project, and i didn't want build-up in that region from the already large-sounding track 1 and 2. The ocassional eq drops here also adds a warble to the final mix that helps sell an analog, electrical sound. +0. 85db at 3697. 3hz, q at 1. 009. This is to add subtle airiness to the drone. It seems weird to have "airiness" in the 3-4k region, but it's the sort of rumbliness of the sound traveling away and dissipating in the atmosphere after the lowest drone sounds. My volume fader settings for all 3 tracks:. Track 1: -8. 59 dbtrack 2: -6. 46 dbtrack 3: -6. 43 db. On my master bus, i have izotope imager 9 with these settings:. Band 1: width at -100 (mono) for 59hz and below. Band 2: nothing at 60hz to 525hz (width at 0). Band 3: width at 48. 1 for 526 to 1. 4khz. Band 4: width at 49. 4 at 1. 4khz and above. Stereoize is set to 6. 4ms on mode i. And that's it! no compressors or limiters anywhere, since i liked how dynamic the actual tracks were and i figure you can always add your own compressor or limiter to the final if you want. I've also added the original po-33 drum loop on my page, as well as the loop after it was run through akaizer but before it hit reaper in case you want to do your own processing. Enjoy :).

Sound transparency (first example on sound transparency and opacity). This sound sample is a companion to my talk and paper presented at foteo ("faire oeuvre, transparence et opacité") at université laval, visual art department, may 2008. The paper title is: "transparence sonore : acoustique physique; opacité sonore : un phénomène psychoacoustique; implications en création sonore". This nearly trivial example shows what i call "sound transparency". Since sound propagation is a linear phenomena, sound is transparent: the presence of a given sound (here a razor) does not modify the sound quality of an other sound (here a knife being rubbed). You can appreciate the sound quality, timbre, texture, dynamic of each sound even when an other one is present. The second part of the sample is the repetition of the first part, but the two sounds are presented on different channels.

//////// made using audacity (only):. Generate 3 wave forms. Saw - 110hzsquare - 220hzsine - 440hz. Pull down the track's volume using the sliderthen mix them all together on one track. Apply a wahwah plugin :freq= 1,5 / phase=0 / dept=70 / resonnance= 5,2 / cutoff freq= 5. Progresively increase the tempo :source tempo to -75% / final tempo to +150% (with dynamic transcient sharpening)source hight to -50% / final hight to +150%. Normalise to -0,5apply short fade in and long fade out. //////// typologie:continu varié (v)(pourrait presque être aussi décrit en tant que série d'impulsions tonique / n' ). ////// morphologie:- masse: son seul- timbre harmonique: riche, puissant et assez agressif (mais adouci par le filtrage)- grain: grain assez "gros" et rugueux- allure: stable, pas de vibrato rapproché, pas de "chevrotement"- attaque: l'attaque est graduelle- profil mélodique: variations à mi-chemin entre scalaires et serpentines- profil de masse / calibre : présence d'un filtrage évolutif intermitent qui adoucit le grain et donne une impression plus "organique".

This is not a complete composition. This is a loop i created for people who play d&d or any rpg or game thats similar. It will loop perfectly. It is not diverse enough in composition to be considered a finished track, nor is it dynamic enough to be a finished song, it is a 3 min 30 seconds loop with the midi used on 2 different synths so it doesn't get more boring than it already is. This is not a complete composition. It's a loop. Meant to be looped. I used 2 sounds, the tiger roar and thunder from two other users. They described it is okay to do so in their description. Https://freesound. Org/people/noisenoir/sounds/238302/https://freesound. Org/people/videog/sounds/149190/. Here are the links to the other sounds used here. I created everything else. (note: it's not a complete song, just a loop, variations of the same loop, and it's meant to be looped).

This sample is a vocal "arh" sound, pitch d. It was created by singing "arh" into a dynamic microphone, with pop-screen and recording, through an e-mu 1820, into cakewalk music creator pro version 2. The sample was then roughly trimmed. The sample was then imported into wavelabs lite where the dc off set was removed, the sample was normalized and the trimmed exactly. This sample was then imported back into cakewalk music creator pro version 2, compressed slightly, then duplicated 5 times. Each of these duplications was given slightly different attack and release times, different pan and different eqs. 1 sample was given a multiple voice chorus\flanger effect and another auto-pan. A 6 sample was then added before the main sample, with reduced gain. This sample has increasing volume envelope and "moving" pan envelope. All 6 samples where sent to the same master out where "chapel" style re-verb and compression was applied. The mix down from this was then imported into wavelad lite, dc off set removed and normalized.

. . Inside an intercity express (ice) between stuttgart and mannheim, sitting in an almost empty (three passengers) second-class broad-spaced compartment at around 9 pm. After a shaky first minute an even part follows for around 90 seconds. Interrupted by some road holes the steady sound continues, now with the frequency of the engine sound rising until the beginning of the fourth minute. Here the "main part" begins, starting with several moments of acceleration, deceleracion and breaking. From minute 5:15 to 7:35 the train reaches it's peak velocity, with only few bumps. After a short deceleration the train inceases velocity again, reaching a second peak, this time noticeably bumpier. Once in a while you can hear some element of the fitments rattling nervously along the track, depending on the constitution of the railways and the overall situation. During the last two minutes the train keeps on decelerating slowly and continuously until the end. Recorded in stereo with a portable stereo recorder (zoom); enhanced in audacity using a parallel dynamic eq (tdr nova), a compressor (vos density mkiii) and a binaural spacializer (auburn panagement).

This is a failed attempt at sampling a rock drumkit on 6 tracks. The channels are as follows:. 0: oh l1: oh r2: kick3: snare4: room l5: room r. I've captured this into ardour 5. 12 using 3 different audio interfaces:. Behringer umc202hd - overheads (dynamic mics)line 6 pod studio ux2 - kick and snare (condenser + dynamic)zoom h2 - room ambience (built-in xy condenser mics). This file is a 6-channel 24-bit flac file encoded using ffmpeg from the raw wav files exported from the original ardour session. There are several issues with this recording however:. 1. The tracks seem to drift, because the individual audio interface clocks were not in sync. The proper way to record multitrack audio is using a single multichannel audio interface - but i didn't have one. 2. There's either x-runs or some usb transfer issues creating small glitches and dropouts in various tracks her and there. Don't know why did this happen, as we've been tracking the real drummer's performance without these issues. Now - fixing these issues manually would be an insane amount of work, but i hope maybe someone has means to either solve them with programming a special tool, or know a tool that could fix these, and make this recorded session ready to be sliced as a drumkit for say - drumgizmo. There's some really good stuff in here - an i was able to cut and mix some really nice drum samples, that i've been using for years, but it's not ready to be fully sliced for maximum flixibility. The instrument was played by myself - it's a drumset by pearl (don't remember the details), owned by the drummer of a band i recorded this with. The band was called small hint - hence the drumkit name. We were recording an ep, and i used some free time left to capture this as well. The ep was never finished and we disbanded soon after. Regarding fixing the issues - here's what i think needs to be done:. 1. I think each hit would have to be automatically phase-aligned on all 6 channels, to correct for the drift. 2. I think it should be possible to automatically detect clicks by simply watching for a sudden change in amplitude between adjacent samples - marking bad areas and then using something like audacity's repair effect to interpolate the waveforms. I think the glitches have much steeper changes in amplitude than even the drum transients, so it should be possible to differentiate between those automatically. If you found a way to fix at least some of these problems - please let me know!. If you've made some "remixes" on freesound - i'd also love to know that. Apart from that - sample what you can out of this and make some sick drum tracks!.

4-channel hq record of a sudden and heavy thunderstrike (nearly) without rain in the afternoon of a hot summerday. The recording equipment was prepared for recording thunder, so there is no distortion, no compression or (auto)gain reduction done by a limiter in the zoom f8, means the whole dynamic is still there and will be audible by a adequate monitor/audio equipment. ;-)the sound was not edited or otherwise enhanced with effects. This file can be used as a intro followed by my other track (link below), which has soft rain at the beginning, before the thunder comes. . . ;-https://freesound. Org/people/bluedelta/sounds/367222/. The 4 channels are recorded in irt-cross technique (microphone distance 25cm) so it is a 360° (4x90°) record. Http://irt-cross. Mozello. De_________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones). Ch1 = flch2 = frch3 = rlch4 = rr. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. Https://www. Sounddevices. Com/product/wave-agent/. Comments about this atmo-record are welcome! ;-). . . And you can help others to find this sound easier by (star)rating this track.

A recording of a manual typewriter. The author is inserting paper, typing a paragraph, and then removing the paper. Sound of paper being inserted into the typewriter using the paper platen winder. Then the sound of typing of about 50 words. A small bell sound is heard at the end of each line, then the sound of the platen being pushed back to start the next line, and the platen moving the paper up one line. The sample ends with the sound of the paper being wound through the typewriter and removed. I have tried to avoid clipping of each typed letter. There is a lot of percussive multi pitch sound in each typed letter. There is a mechanical escapement that provides a clicking sound as the platen is moved back for the next line. This sample was recorded direct to the hard drive of this samsung nc10 netbook using audacity set to 44. 1khz and 16 bit in mono. A dynamic microphone was used on a small desk stand about 1 foot (30cm) from the typewriter, the stand being on a different table to the one on which the typewriter was used. The microphone was a fairly cheap make (hitachi hmp606) and was pre-amplified using a maycom mictube preamplifier built into the xlr connector, connected to the mic in port of the samsung nc10 netbook. The mic boost was reduced to zero, and the gain of the maycom preamp was at its lowest setting.