Effects recorded from the field of the zoom h6 recorder,and microphone oktava mk-012-01,and then processed. Sound composed of several layers, and then processed with different effect plug-ins in: cakewalk by bandlab.
Roller coaster clanking up track in distance. Metal clank as it is pulled up. Shuddering and roar of car as it runs. Some voices talking from the ground. Some wheel squeak and a "woo!" towards the end.
I tried to make a sort of explosion w/ my voice, and added a compressor, reverb, a little bit of distortion, quicker tempo, and i lastly slowed it down.
This is the first version of cannon. Wav. I tried to make a sort of explosion with my voice, and added a compressor, reverb and a little bit of distortion. Slow mo cannon. Wav was edited a bit more.
The sound of a restored cast-iron pump, located beside the church in a berkshire village, which is still being used to draw water. We hear the squeaking of the pump and the splashing of the water into a large metal container. Sony psm-10.
Me playing on my gibson les paul electric guitar. I made this so it can be looped and played repeatedly. Donate doge: dbsbgyyumwjhd9xk8bthqqqaykhzlibdhp.
Αττεντιον: really harsh noises! lower your volume!harsh, metallic, industrial sample, 2 bars long at 120 bpm with a little release, dry. Created with a yamaha dx-100.
We have a really old garage door that apparently is not very well lubricated. The squeaking adds a nice creepy feel, recorded using a zoom h4n field recorder.
I sound recorded my metal slinky springing up and down as i was holding it. If you put your recorder on the slinky you should end up hearing the following sound, like an armada of storm troopers.
Scraping two kitchen knives together to get that classic "shing" sound. Some clanking sounds are also made when the knives touch together. Recorded on iphone 6s and cleaned up in adobe audition.
Wind howls through cracks in a metal framed window. The window bangs as the wind pushes it around. Plenty of silence is included so noise reduction can be applied to taste. Recorded with a zoom h2.
Made in audacity with a couple of stock sounds. Can be used for a big industrial machine or a huge mechanical rocket cannon. Beeps at the end were taken fromhttps://www. Freesound. Org/people/kwahmah_02/sounds/246332/.
A guitar loop, recorded by plugging directly my guitar to my computer, and processed through guitar rig and some eq. And i apologise for my playing. :p.
Thunder strike for the master degree in video games of university of málaga (uma). There is a rainy ambience filtered with a hpf before the thunder sound. For the thunder there are 3 parts: a metallic whoosh, the impact and a shock wave.
Sawing wood: using a small saw to saw up wood. There is a bit of metal rattling as the wood is being sawed. Recorded with a zoom h6 (rode ntg-2). Recorded in a room with good acoustic. Can be used when someone is sawing wood.
Open and closing a hamster cage: from the the sound you could't think this is a hamster cage. It sounds like a metal cage opening and closing a few times. Recorded using the zoomh4n and the rode ntg1 condenser shotgun microphone. No processing was done to this sound.
Opening/closing a new door, recorded with a roland r-26. Let me know if you need 4 channels (from directional and omnidirectional mics), this is a stereo mix of both.
Recording of traditional sneaker with hard rubber sole stepping down on glasses on hardwood floor. Moderate room tone present. First takes are extremely near to glasses on floor, then followed by takes done about a meter away and at waist height. Glasses used were a pair of old metal framed earhook with polymer type prescription lens and an all plastic frame "blue light reducing" pair with plastic lens. Recorded on a tascam dr-05 linear pcm recorder around 11pm on 5/20/17.
Gravação em estúdio, utilizando uma chave e microfone condensador. Gravado para a disciplina de captação e edição de áudio do curso rádio, tv e internet, universidade anhembi morumbi. São paulo-sp. Brasil.
A recording of a noise of a polish train running, slowing down with the specific metalic sqeaky sound, stopping, accelarating and then running slowly. At the end of the clip there is a motorcycle passing by no the road parallel to the train tracks. Recording was made using zoom h4n on 48khz and 24bit settings.
A low-pitched ringing sound made via a high-pitched asian bell with a clear ringing tone, struck with a wooden dowel, the audio then subjected to a sequence of pitch-changes downward, each combined with a flanger-type effect at various settings for rate, depth and regeneration.
Wake of a metallic sailing barge, low speed, close up. Recorded at the pope. Small waves. No motorarcachon, france, 2021. Recorded with schoeps msrecorded on sounddevice 633stereo wave, 24 bits, 48khz.
Some weird recording that i found on memory card of my recorder. I don't know what's the source but i like something about it. . . Recorded with tascam dr 100 mk3.
Made a recording of hitting with a piece of wood on a metal chute on a playground in the woods. Afterwards send it through the daw. Like the sound. Recorded with a featurephone from nokia. Let me know if you like it and/or use it if you want to.
Kenco 10 ton punch press, forming and crimping a 3/4" diameter x 1. 5" long steel cylindrical part on to a rubber hose. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.
Various slap sounds recorded in a both with an neumann u87i. There is a metallic resonance from one of the music stands. The slaps hit various body parts (face, neck, belly). Feel free to use however you like.
I couldn't find a decent heavy iron door/gate sound fitting my needs on freesound. Org so i made one combining 4 different sounds that i got from freesound. Org using adobe audition. . . . I hope you find it useful!. #109710 by tomlija "horror gate"#268233 by ylearkisto (a great big long name in some other language)#199282 by gubodup "big metal chain"197463 by hykenfreak "draw bridge lower".
Large metal wheel rolling on a track supporting the loading ramp of an old ferry boat. Recorded with a sony mz-rh1 mini disc and unmodified panasonic wm-61 electret condenser microphone capsules.
This is the dirty tony's tom 14''. He recorded it at johnny's studio, the only studio with a hole in the wall! it has been recorded with four mics, and this is the mix of all!.
I took a metal pan and put some water in it. I used a med. Hard felt timpani mallet and used a tascam dr-40 recorder. Feel free to use and just message me if you use them for something. Thanks.
I made this by layering the sound of scissors, and heavy pieces of metal and mixed them with some eq and distortion. This is made with audacity. If you use this sound please link to my page in the credits!!!.
Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.
Some hi hat loop i made for a track i'm working on. One hat is doind some step pann pattern, another once per bar on left, another on right, and one more in the center with stereo verb.
