17 Royalty-Free Audio Tracks for "Radio Ad"

Radio announcer type stuff for dub trinity radio: http://www. Freesound. Org/forum/sample-requests/32231/.

Was trying to get some radio noise and the sound of it being switched off. Some ad flicks up briefly. The radio is an old my grandfather used. Recorded on tascam dr-1 with omni mics.

Dead air static with a "singing" hum at 103. 3 on the fm radio dial, with the volume boosted and slight effect added.

Big symphony orchestra warming up in berlin´s radio hall rbbolympus ls 11 original recording, only fade in/out added.

Low pitch static which reminds me of 1950s sci-fi television. Created by filtering a static wave from an analog radio then slowing the pitch and adding a mechanization effect.

This is a sample of a ship talking to port control. It was created using text-to-speech software like acapela and editing the voices in audicity to sound like radio transmissions. Squelch and bleep sounds from the ptt buttons were added to the mixed clip.

16 bars/30 seconds of laid-back r&b groove with enough space for added audio/vocals over it, perfect for a podcast intro.

Alien communication radio sing loop masteredi transformed the sound of my voice and added effects, then mastered it. Recorded tascam dr-05xedited: adobe + fxs + mastered.

I hope you feel this too. . 30 seconds of minimal house-inspired vibes, perfect for an outro with some added vocals on top of it. Enjoy. . .

Requested by fivebrosstopmosyt [cc zero] script for alien train station. Plain voice with vst added to alter the sound for alien or possible robot.

This sound is an audio file that slowly breaks up the further it is played. I recorded this with an in-built microphone, no idea what make though. I recorded this on audacity, and added gradual distortion. Warning: you may need to turn down the volume for the last 6 seconds!.

A simple sine-generator piped through a slew of wacky effects automated with randomized lfos. I added some cabinet emulation to give it a 'living room' feel but left it dry enough to add additional stereo/reverb processing. P. S. It loops cleanly. Software: bitwig studio.

Someone eats an apple, turns on the radio and the news radio program begins. The original sounds used are from these lovely people:chewing: freesound. Org/people/luthien22/sounds/467625radio knob: freesound. Org/people/joao_janz/sounds/477704;and not least, the news program music: freesound. Org/people/connum/sounds/23874. I only combined them, added some hissing to simulate radio quality and ended the news music early, without the final effect, to be more subtle. Please use the licence (give attribution) to the the main sound, the last linked from connum. Thank you. _____. Port: alguém come uma maçã, liga o rádio e toca a música de abertura do programa de notícias. Eu apenas os combinei os sons dos links acima, adicionei chiado do rádio e terminei o som da música antes, sem o efeito final mais destacado, para ser mais sutil. Por favor utilize a licença (atribua ao autor) do som principal, o último link de connum citado.

10119 khz 2011-oct-27-1400-utc station clicking over the band. Clicks noted in 10114-10123 khz range. His equipment was old czechoslovak army transmitter rs-41 (about 1965 year). Added frequency marks at -45, -27 and -10 sec. Of the record. I know that rs-41 is clicking because i have the same transmitter at home. But later found that also ft-897 receiver is often the source of phantom clicks. . .

Title Street Musician, Violin Artist natalie Original mp3 data Length:0:30 minutes (598.51 KB) Format:MP3 Stereo 44kHz 160Kbps (CBR) User tags Melody, Music, Pedestrians, People, Street Musician, Violin Type Natural PDSounds record number 214 Comment Street Musician playing a Violin. Pedestrians walking past in an innercity shopping street. Leverkusen, Germany. The musician is using a small radio for some added melody. High heels passing by.

Non-functional tube radio warming up, making a loud 60hz hum with lots of harmonics. As a bonus it clicks off at the end. Zenith consoltone. Only because the faq says so: electro voice n/d 257a through impedance transformer into crappy gigabyte motherboard realtek high definition audio. 16bits, processed at 32bits. Audacity sound editor and/or driver wouldn't record mic level so it was very noisy after amplification. Filtered with a (mathematically equivalent) fft constructed whopping 64k length zero phase filter (blackman window) with 5 wavelength width bandpass at each harmonic from 60hz to 5,520hz. For some reason a fraction of some of the harmonics didn't get through so did another pass on the residual noise and mixed that in. Near the beginning there was a sort of brief duplicate signal that descended in pitch so it didn't make it through the filter. I added that bit in. Attenuated frequencies above 3. 6khz because they are pretty much noise, but removing them didn't sound right. Cleaned up the beginning a bit in various ways, cut it down to 15 sec and carefully appended the unfiltered "click" onto the end, which i denoised 12db with audacity's noise reduction.

Over 5 minutes of background noise from a well-known new york city diner, including people talking, clanging plates and glasses and forks and knives and cups being cleared away by staff, and in the second half of the clip, radio ads playing faintly in the background. But crucially, no music is playing. This means you can either use this clean, or layer in your own rights-cleared music if you're using this in a film or whatever. Recorded in january 2019 with an iphone x — don't let the recording device scare you, it sounds pretty good and certainly fine for this kind of background noise. Use it in any way you like for any purpose. Update: i just uncovered a similar recording i made in 2016 at a different diner, and uploaded that here: https://freesound. Org/people/edlundart/sounds/515719/ pick whichever one you prefer, or use a combination of both!. Warmly,bard edlund, edlundart. Com.