1,863 Royalty-Free Audio Tracks for "Square Wave"

A 1khz wave, often used as an effect for a flatline, test pattern, censorship, etc. This one more for effect (such as a movie) than a test tone. This was built with a square waveform for maximum loudness.

*Square root of 7 on C. √7/1 = 1684.41 cents. MIDI pitch bend: 1,59

*Square root of three on C. √3 = 950.98 cents. MIDI pitch bend: 40,48

*Square root of 5 on C. √5/2 = 193.16 cents. MIDI pitch bend: 103,61

*Octave equivalent square root of 7 on C. √7/2 = 484.41 cents. MIDI pitch bend: 1,59

*Square root of 6 on C. √6 : 2 = 350.98 cents. MIDI pitch bend: 40,48

Square root of 5 on C. √5 : 1 = 1393.16 cents.

*Square root of 6 on C. √6 : 1 = 1550.98 cents. MIDI pitch bend: 40,48

0

423.2 Hz tone

409 Hz tone

First, a 440hz tone will play on the LEFT side. Then, it will stop and play a 440hz tone on the RIGHT side. This is for testing which side is which, and if your stereo system is working properly.

0

0

422.5 Hz tone

A low freq square wave bent down.

Created in labchirp using a sqarewave in a frequency of 50hz and a flanger in 10.

Square wave tone at 440hz.

Rhythmic synth pulses.

1000 Hz tone, created by Denelson83 Note on playing this audio clip This audio clip is an en:Ogg Vorbis file. For a list of compatible media players, see the article at [1].

(caution: intended only for use as part of a larger waveform). Upward ramp of a 10 hz square wave; equivalent to 100% dc offset.

Retro sounding bassy loop. Sort of square wave fake analogue synth.

450 Hz tone

435 Hz tone

439 Hz tone

880 Hz tone No creative content.

480 Hz tone

451 Hz tone

430.54 Hz tone

Create 'tăng lực' sound:audacity:- create→add new→mono track. - generate→chirpwaveform: square• startfrequency (hz): 1000amplitude (1-0) : 0. 8. • endfrequency (hz): 3000amplitude (1-0) : 0. 3interpolation: linearduration: 0. 100s. - effect→repeatnumber of repeats to add: 2.

Synthesised in fl studio 11 by playing an extremely loud square wave, with modulated reverb and a compressor.

Synthesised in fl studio 11 by playing an extremely loud square wave, with modulated reverb and a compressor.

Sample of the doepfer a-110-1 rectangle output. Pulse width is set to around 50%, so it should roughly be a square wave. Here's a link to the module: http://www. Doepfer. De/a110. Htm. Captured using a rme babyface and cubase.

A pad i accidentally made. This sound is in the open domain, use it freely without the need for retribution or credit.

Synth swooshing sound of a square wave. Suitable for intros or logos. Available in several intensities.

Raw oscillator waves from dave smith instrument's mopho. Pulse-13, asymmetrical square wave. Recorded through a behringer mixer into an mpc. 44. 1k 16-bit.

Stereo meander waveform c3 recorded from analog synthesizer.

A simple heartbeat of a dying person. Made in lmms with bitinvader.

A distorded square wave that simulate static noise.

As i was playing with creating sequences with help of square waves i happen to make this beat. Annoying. . . Made with a small modular synth with love :-).

Multiple alternating square waves scaling up in pitch, designed inmilkytracker. -----------------------------------------------------------------------. This sound, as well as everything else i have upload here,is completely free for anyone to use. |you may use this in any project, whether it becommercial, or not. You aren't even required to credit me,although that would be appreciated. |you may use any of my sounds however you please. I hope they are useful. 🎶.

Recording of the defective line transformer of the crt of an old tv set. Can be used for sfx and as a nice sample base for diverse lead wavetable sounds.

A short signal for text message arrival. It's a monophonic, square wave synthesis. Made to sound like old times, when cellphones didn't play mp3 files. Synthesised with zynaddsubfx inside lmms, edited and normalized in audacity.

This is my attempt to emulate the sound of the harmony 64 chimes that can be heard on some ice cream trucks. I used a single note from a low-quality recording from a demo of the chimes for the base synth then cleaned up the audio using audacity and set the starting pitch to "c". (in particular, i used the first note of the "can-can" chime from http://www. Microminiatures. Com/tunes. Html). I then composed a short variation of a well-known song (bicycle built for two in this case). This loop can be used in games or other projects as long as you put a link to this sound's page in the game description. I hope you enjoy and any feedback is welcome!.

Generated using fibonacci sequence on chuck programming language.

Chirp sound, 250hz - 800hz square waveform. Linear interpolation. Wet reverbed and compressed to 3:1 ratio. Equalized with riaa wave curve (top-left to bottom-right). Each chirp lasts 3. 750s. Repeats 4 times layered over itself, including the last chirp without any layered sounds on it.

A patch generating triggers not that random. . . The triggers are triggering an envelope generator and a sample and hold. The sample and hold cv is quantized following a minor 7th chord rules. Hope you understand. . . Pardon my english. Why this. Answer. I have to start adding something like this to my patches. But i use 3 lfos for this :-/ thats about all i got - right now. The alm pip slope works fine as an lfo too. Square wave this time. Take a close look.