508 Royalty-Free Audio Tracks for "Surface"

- contact mic was attached to the soft plastic box which was laying on the table- the surface of the box was being touched quickly with different pressure- the sound was recorded with pocket roland recorded put in from of the speaker.

This is an ambient recording of the main spring that feeds lake atalanta in rogers, arkansas. The recording was made using a zoom h5n recorder with a stereo mic capsule held near the surface of the stream at a slightly different placement.

Listen carefully. It's a small volume of sound. An early bird (at around 5 a. M. ) resting on an electricity cable outside my apartment did a dropping on the surface of the road. It's a tiny sound but surprising enough for me. Seemingly i recorded this at unnecessarily high resolution rate.

Styrofoam on a carpet. Using the stereo-effect on a h4nsp. The sound was recorded in august 2016 in an old industrial hulk in leipzig, 10 metres below the surface. Because there were some raves now and then, there was a lot of stuff i could use for creating sounds.

Assorted ceramic bottles, jugs and bowls clanking against each other, sliding over a wooden surface, being touched or put down, scraping the ceramic bowl with a metal spoon and placing the bottle ready to pour into another ceramic glass.

Walking on a trail in a deep midwestern forest. The surface is a nice crunchy local creek-rock. Recorded in late july of 2015 using the marantz pmd-661 (*with extra-special quiet amplifiers by roade brothers) and the omnidiectional beyerdynamic me58 dynamic microphone.

Captain, we've had reports of a strong signal emanating from the surface of klumpok b. Time to investigate. Pulsating drone from various synth samples from my analog collection. Small amount of reverb and edited/multitracked looped in roxio sound editor.

The sound of a dye being rolled, i found that it doesn't matter whether it's a 6 sided dye, a 4 sided dye, a 20 sided dye, or a 60 sided dye, it all sounds the same. . . And yes i have a 60 sided dye. . .

Three sound compiled for use with the makenoise morphagene as a reel and make some microsounds, recorded this week with h4n zoom in 48khz, 32bit with 2 geisha metal balls, handle of 12mm diameter metal marbles and all of this let go of a leather surface. Have fun.

One of autumn's most signature sounds is that of dry leaves skittering and tumbling as they ride along on a hard surface. In this case, the hard surface is asphalt. Hardly any other sound, just the strong autumn wind, and bunches of dried out sweet gum, maple and oak leaves racing across an asphalt parking lot. Think of it, also, as the sound from our youth, our careful youth when everything was achievable. At least for me, this brings me back to my happy place. Recorded on saturday october 17 2020 in an asphalt parking lot buffeted by gusts between 20 and 30 mph. Sound devices 702. Sennheiser mkh416 left channel, beyerdynamic m58 right channel.

Very loud, close recording of an old, partially functional wallensack reel-to-reel tape recorder. Recording includes the tape motor in operation and a piezo mic being dragged across the surface of the tape recorder. The recording has a fair amount of both background noise, and hum from the machine itself.

Recorded on ntg2 shotgun microphone with blimp and fluffy windshield. Short recording of light footsteps on asphalt road, with a little gravel under foot. They were light shoes so it's a light impact. Recorded during high winds.

This is an ambient recording of the main spring that feeds lake atalanta in rogers, arkansas. The recording was made using a zoom h5n recorder with a stereo mic capsule held approximately 9 inches from the surface of the stream a little further away from the spring source.

This is an ambient recording of the main spring that feeds lake atalanta in rogers, arkansas. The recording was made using a zoom h5n recorder with a stereo mic capsule held near the surface of the stream about 75 yards from the source. Nice park ambience. . .

The sound of someone gently stirring a liquid in a glass bowl, and at the end shaking off the utensil and putting it on a hard surface. I made it for a kitchen scene. Use it freely without crediting.

**pleace, be carefull and reduce volume. **. This is original sound of a razorblade scratching the surface of glas. This noise was created to make a painfull noise. Headphones recommended. Recorded with zoom h2n - slightly filtered and cut of useless frequencys below 2k.

Foley movement of puzzle pieces being slid around, picked up and clicked into place on a wood surface. I used a zoom h4n and applied some noise reduction to get the room tone out. Very specific sound, hopefully gets some more use out of it.

Man taking a piss in a parking lot. The sound of the urine hitting a hard surface, pavement, in a suburban aural context with zipper at end. Recorded with zoom h2; field recording background has insect chirps and distant highway noise.

I´ve found a more than 2 meters high and wide bronze artwork hanging upright. It has several blocks on its surface, looking just like a upright hanging town. On 5 of the "houses" i played a rhythm, using rather hard drumsticks für kettledrums. Recorded with zoom h4n with 2 schoeps ccm4 mics.

A close recording of me splashing about very gently in a basin of water. You can hear bubbles forming on the surface. Some birdsong and road noise in the background (but edited to remove the worst). Used as a layer for a dock ambience. Recorded with an akg c414 into a focusrite saffire pro 40.

I strapped an h6 to the frame of a rickety fixed-gear bicycle with no shock absorbers on either wheel. I rode this around a shipping container yard near ahmedabad, on a gritty surface made up of interlocking concrete tiles. Close mic-ed.

Simulation of a heavy object being dragged or pushed across the ice. Effect was created by dragging a small block of wood across a tolex covered surface, overlaid with sound of fingernail dragging across the bottom of an empty, but icy ice cube tray. Recorded with an sm57 dynamic mic.

Dropped two contact mics at the surface of an anthill. Recorded with jrf contact mics in serrinha do alambari, state of sao paulo, brazil in sound devices mixpre-6 96khz 24 bits.

Small ceramic tile, wet, being rubbed with a) rubber glove and b) finger (markers in file). Basic noise treatment added, but otherwise it is 'as recorded'. I used it for the sound of a person slipping on a wet surface as they struggle to get to their feet.

Walking on a trail in the winter woods. . . Fairly fast pace. I start off walking through leaves, then transition to walking on the gravellyasphalt surface. Since this recording was made in winter in early afternoon, there are no othersounds in the woods but just the steps. Equipment used: zoom h4n recorder, beyerdynamic m58 microphone.

End of summer. Field recording in the surface of a compost mound. Sound of several flies species (diptera) crickets(ortoptera) and a lot of undefined crackles blops and clicks result of the frenetic activity of various types of grubs and worms into the rotting organic matter. Perfect for corpse soundtracks.

Perfect walking sound effect. Sound of several people walking buy on a hard surface with hard shoes. You can hear the sound reverberating off the walls and solid flooring.

This is a reverse ricochet accent i made from scratch. I took the classic “h-b cartoon ricco” and modified it to make it look like an approaching bullet is coming to shoot a glass object or hit a hard surface. You can use this sound however you want. Just give me credit!.

This sample is part of the icefield-library. I used a pair of soundman okm2 mics as contact microphones which i fixed to the surface of a frozen lake, then recorded the sounds made by throwing or skimming several stones and pebbles across the ice. Wonderful effects can also be achieved by filtering or timestretching the files.

A close up recording of an overheating usb slot-loading cd/dvd drive that repeatedly tries to spin up, but fails and makes some clicking noises. Note on low frequency sounds: i recorded this with a zoom h1n recorder at about 2cm distance from the drive slot. I held the recorder in my hand and rested my hand on the surface the cd drive was resting on, so there is somewhat of a mechanical connection between the drive's vibrations and the recorder. I believe this led to the low frequency parts of the recording. About halfway through the recording, i lifted the drive up with my other hand and held it at a 30degree angle to the surface and recorder. As you can hear in the recording, this made it spin up a little longer before failing and spinning back down.

I hadn’t had sex for so long but this guy was so hot i let him fuck me on every surface in my apartment. Had trouble getting him inside my tight ass at first but then he bred me bareback.

Recorded at a storm sewer grating at shaw st & manchester ave in toronto's seaton village neighbourhood, on 24 apr 2012. The surface drainage in this section of the city was once carried by the lost garrison creek, and so this might be the sound of the lost creek's waters. H4n sound recorder with sennheiser mke400 stereo microphone. .

Hey everyone,. I love freesound so i thought i'd contribute my first sample. I found that people love dropping coins on every surface imagineable except for grass. Recorded on a zoom h4n for use in this dota 2 short film - https://www. Youtube. Com/watch?v=wdv1mia1_1k.

This is a first attempt to record sound underwater, i build a small hydrophone according to the instruction gave us by digifishmusic, i could probably make it better but all considered i'm pleased whit it. The hydrophone was placed in a small river near where i live, just below the water surface but unfortunately it kept bouncing against the rocks so it's a bit noisy. Enjoy!.

I really needed something that sounded like a group of horses galloping in the distance and couldn't find anything. So i busted out my zoom h6 and set it on my futon comforter and then just tapped my fingertips on the surface right next to the stereo mics. Then i put that track in premiere and made four layers, all offset to get different rhythm and i thought it turned out pretty good so wanted to share it.

Cell phone vibrating on a hard surface, recorded from within. I put a nokia 6060 on top of a turned-over plastic ikea bin and a zoom h2 under it. This sound is cc0 but i highly recommend that you include a link to this page when using it, to avoid misunderstandings. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

Cell phone vibrating on a hard surface, recorded from within. I put a nokia 6060 on top of a turned-over plastic ikea bin and a zoom h2 under it. This sound is cc0 but i highly recommend that you include a link to this page when using it, to avoid misunderstandings. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

This mp3 contains a series of sounds that can be divided into individual elements if needed. I set down a full, unopened can of beer several times on a hard surface. Then i opened the can of beer. Then i placed it down again and flexed the aluminum a bit. Finally, i took a long gulp of beer and let out a satisfied "ahhhhhh!" now i'm drinking the beer as i upload this file. Mmmmmm. . . Beer.

Create thằn lằn khổng lộ sound from amhola's’s «crashing-waves-into-rocks-3" sound. I need splash for big animal in ocean but can't find whale splash (maybe see if find us navy have submarine video with should of submarine fly and splash on ocean surface). Audacity:. • cut 24. 443s to 29. 286s. • file→new. • paste. - effect→change speed. . . Speed multiplier: 0. 450. • select from 7. 790s to 10. 763s- effect→fade out. • select from 0. 000s to 1. 637s- effect→fade in.

One of a series of foley recordings i made by sticking a piece of contact (sticky plastic of the kind you use to cover books) to a wall and tearing various household objects off it. The idea was to make a fairly comprehensive collection of rips and tears with varying timbral qualities that i could use to design ui sounds effects. Recorded with a rode nt1 into a universal audio arrow. This sound comes from a plastic candy wrapper.

A drain after a water flow: the water seems to build up a physical-mechanic surface tension kept mass in the tube, opens and closes this bubble-entity producing a specific rhythm in the plughole resp. The drainage pipe. It pulses with various plops and splashs, starts off with a firework kind of beat but then one hears a differentiated rhythm of 4-strokes sequences with slugs before these etc. Getting slower. Many minutes later it ends (beyond this track). The (hearable) cut is just the censorship of a small abortive piece -- left in to document the recording as recording.

Cell phone vibrating on a hard surface, recorded from within. I put a htc wildfire smartphone on top of a turned-over plastic ikea bin and a zoom h2 under it. This sound is cc0 but i highly recommend that you include a link to this page when using it, to avoid misunderstandings. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

This song is about a buddhist who returns to the monastery, where he was abbot centuries before (in a previous life). While walking along the path with torches, the memories come to the surface. First, it is difficult to see it without understanding it. After a while he can let it come to him, without exercising control. As a result, he learns the life lessons that he was not yet ready for. Through the light at the end of the path he experiences what enlightenment is:"dare to expose everything without judgment and learn from it to become more loving instead of always needing control".

I wanted to find a good creative commons 0 sound effect of fingernails scratching on a wooden surface but i could find the exact thing i was looking for. So i recorded myself scratching my bedroom door with my fingernails using a recording app on my phone and edited it in audacity to remove breathing sounds, and to make the sound feel more heavy/deep, including some very faint reverb. Since i really wanted this i thought it might be useful for someone else! i hope someone else out there like me finds this somewhat useful. Theres a bit of a clicking noise at the end - i think from the recording process.

Around 2010, i circuit-bent a motorola cellphone and added a control surface to control the bends. Then i added an atari paddlewheel so its big potentiometer could be used to do pitchbends, and the result is an instrument i called the "sonic electronic ball breaker". It's got knives, quarterstaves, thor's lightning, sharp sticks, nuclear machineshotguns, and even some claws that come out to jab 'em. In this sample i'm going through and playing with the controls to see what i get. These sounds are pretty abrasive, but they work well when run through a bunch of effects.

Two contact microphones recording an engine from a mini cooper s in sport mode. Surprisingly aggressive-sounding. Intended to use for a race car asset. Contact microphones are stethoscope-like mics that you place onto a surface to record vibrations. This way, i was able to record the raw engine without wind or perspective. The left channel is the chassis and the right is the engine block. . . Blending the two together produces a great sound. Free to use.

The sound of the bottom of a ceramic mug, dragged over the metal grating of a coffee machine. It sounds like a sword drawn from a scabbard. Recorded using a zoom h6 in the kitchen. Applied a filter to remove unwanted low and very high frequencies. Also corrected the volume level to adjust all four recordings to the exact same level. There are some minor distracting noises - i assume from my shirt while moving the mug over the surface. Also a fan is very faintly audible in the background. If you are interested in a very clean recording of this sound, please let me know.

A huge ice storm moves in to the back woods of north carolina on 01/30/2014. First it snowed. . . And then it sleeted. When all that sleet froze on the surface of the snow, walking in this winter-wonderland produced an amazing sound. So, i put on my boots, grabbed my zoomh4n and set out to record the magic!. This would be very useful as foley fx for walking in any frozen environment. I walked on various surfaces and depths of ice and snow throughout. I tried to leave enough space between steps so that the sounds do not overlap so that they can be cut for editing purposes. Enjoy!. - christopher c. Courter.

Sharpening knife : sharp sound. The sound was post-processed to make the sound of the knife seem more scary. Afiando faca : som afiado. O som foi pós-processado para fazer o som da faca parecer mais assustador. Dragging a knife : shaky sound of a knife being dragged on an irregular surface. Arrastando uma faca: som trêmulo de uma faca sendo arrastada em uma superfície irregular. Girl yelling : high pitched sound. The sound was post-processed to seem like the sound happened in a room full of echo. Garota gritando : som agudo. O som foi pós-processado para parecer que o som aconteceu em uma sala cheia de eco. Gravados com um microfone shotgun shure vp89 e uma placa de som behringer u-phoria umc404 hd. Gravado no estúdio da escola ort no rio de janeiro, em fevereiro de 2022.

It's a recording of a calcium-sandoz® forte/fuerte 500 mg effervescent tabled falling into a glass of water and dissolving. You can hear the tablet dropping into the water and water droplet hitting water surface back. After w while - co2 buubles start to appear creating noisy sound. The recording has a long natural fadeout and unfortunately some background noise. I leaved "silence" before the sound starts so you can de-noise the recording to your needs (i prefer audacity for denoisig). Recorded inside of my wardrobe for acoustic isolation using zoom h2 on a mic-stand. Recoded as 96khz/24-bit wav. Normalized, truncated and convertet do 16-bit flac using audacity. I've converted this to 16-bit as it still has plenty of noise and 24-bits would not be any better after normalization.