1,299 Royalty-Free Audio Tracks for "Tools"

Track made for the final assignment of the coursera course audio signal processing for music applications. Sounds from freesound. Org, transformed using sms-tools and edited in audacity.

Sound of a socket wrench pivoting back.

Sample of a tape measure.

Recorded with a zoom h1. Edited in sound forge.

Digging into a tool box. Recorded with a zoom h2n.

Me opening and closing a pliers, recorded with an iphone se.

Raw audio from my zoom h4n.

3 quick turns on a ratchet. Recorded on a zoom h5.

Dragging a screewdriver on a metalspring, mounted on a tablelamp. Recorde with zoom h1.

Sound of using a wrench tool/ allen key to tighten bolts.

Sounds from a construction. (took some sounds from freesound. Org and put them together, hope you like this).

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Ingersoll rand riveting hammer started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Various metal scrap moved together, both inside and outside a box. Created mainly for a lockpicking sound effect. Let me know if you use it!.

Recording of a thakita electrical drill drilling into a piece of ply wood. Hard abrasive sound. Recorded in a workshop using a zoom h6 recorder.

Bass drop for hardcore, metal, or whatever you need it for. I made it from a pure sine wave with some eq and a maximizer. The note is 1st d.

Using a demolition hammer to dig a hole in the road to fix a pipe that goes under the asphalt and a dog barking in the background.

The sound of me twisting the end of a pen of lantus insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

The sound of me twisting the end of a pen of novolog insulin. Good for machine and robot sounds. Recorded with an audio technica at2035 on the left channel and an electro-voice pl84 on the right.

Construction or woodworking sound of an electric table saw cutting a piece of plywood.

A match taken from the box, light and burned. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Four pieces of wood chopped with an axe. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Spinning a cordless, brushless drill (check empty, no load speeds) at various bursts of different length. Some in 1st gear and some in 2nd gear; in 2nd gear the electric brake is more pronounced. Mic changes position now and again to vary the sound character.

Workshop search tool box rummage tools searching wood metal foley.

Sound of an impact wrench. Sound recorded with a zoom h4n pro and a rycote mini wind screen. Son d’une boulonneuse. Son enregistré avec un zoom h4n pro et une bonnette rycote mini wind screen. My sounds are licensed under the creative commons 0 license but it would be a pleasure for me to hear your work so doesn’t hesitate to comment or to send me a message with your work :).

Unbranded needlegun scaler started once against a metal plate. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Creative audio application of the harmonic plus stochastic transformations module of the sms-tools by the mtg.

A chordless drill being run a various speeds and being tightened and loosened. Recording equipment: akg c214 / focusrite saffire pro 24.

Hitting chopsticks together at different time intervals.

Gear:. Sound devices 702sennheiser 416.

Various sounds of hitting an anvil with a hammer.

Recorded with zoom h1. Working with pieces of wood blocks. Edited with reverb.

Jackhammer and vacuum working through asphalt recorded as close as possible without mic distortion.

A handheld electric drill with different intervals. Recorded with a rode nt5 microphone in a sound booth.

A sci-fi, martian inspired take on a small sampling of the classic jazz staple "chameleon".

Warming up 3d printer, recorded with zoom h4n. Recoding is unprocessed except normalising trimming.

This sound has been made with 2 hits on a lift door recorded close with a km185.

Handling an alligator, monkey or pipe wrench. See picture. Http://static. Panoramio. Com/photos/medium/95491471. Jpg.

Sound of a microwave running and stopping. Recorded with an iphone se and edited with goldwave.

A quartz crystal rod scraped against a steel cup-like object to create the sound of a crystal being inserted into a socket.

General ambient (featuring a band of gnawa musicians) recorded from a roof of the fez medina. Zoom h216 bit / 44. 100 khz (stereo). Fez, morocco - february 2010.

Moving some tools and boards.

Residual signal obtained after subtracting the harmonics from a female speech sound: http://www. Freesound. Org/people/xserra/sounds/254374/. This was done using the harmonic plus residual model implemented in the sms tools: http://mtg. Upf. Edu/technologies/sms. The parameters used for the analysis were:. - window: blackman- window size: 2001- fft size: 2048- magnitude threshold: -100- minimum duration of sinusoidal tracks: 0. 05- maximum number of harmonics: 100- minimum fundamental frequency: 150- maximum fundamental frequency: 250- maximum error in f0 detection algorithm: 5- max frequency deviation in harmonic tracks: 0. 02.

Recording of a nail being hit into a wood board with a club hammer. Loud hard repetitive sound post-processed to add slight compression to the audio. Recorded inside a workshop using a zoom h6 recorder.

I stopped at a dog park in los angeles on my way to work. There weren't too many dogs, but the maintenance workers were there cleaning up, so i recorded them. Recorded with: sound devices 702t, beyer dynamic mc930 mics.

A pneumatic air tool (jackhammer) was used to lower some concrete blocks on the exterior of our garage. I was inside the house recording it with a zoom h2 recorder. So this was recorded through an insulated wall. This is the longer recording.

Chain pulley pulled up and released four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Opening and closing of a cutter knife in several ways. __recorded in wav 48khz/24bit with the zoom h4n and sennheiser me66. Of course we are happy about every mention. Nevertheless, we do not require any attribution and are happy to provide our sound files free of charge.

Playing around with, picking up and dropping metal tools in a toolbox.

Just tapping things around my desk with a screwdriver and jingling the loose change inside a glass jar. I had the mind to use all of the sounds in this file for a kick/snare/hi hat drum rack in ableton live - hence the ranges of frequency from low (jar thumps) to textured highs (loose change) and high (taps. ) i hope these come in handy, please enjoy! - vanszi. Bandcamp - https://www. Vnzi. Bandcamp. Comspotify - https://open. Spotify. Com/artist/0mzsotvcahcvlcqwo9qndgsoundcloud - https://www. Soundcloud. Com/vanszi.