1,299 Royalty-Free Audio Tracks for "Tools"

This is the sound of a tape measure from ubica lab (upf). Their research areas are enclosed within the general disciplines of ubiquitous computing, contextual intelligence and cognitive systems, using sensors and radiofrequency identificaiton (rfid).

This is a street vendor in seoul, korea who would cut a sweet snack on the sidewalk with scissors and a large knife. It was recorded on minidisc with a portable sony stereo condenser mic.

Rhythmic hammering on a metallic tool box with a scabbling pick (hammer). Four different styles - first mixed with some scratching sounds, then hammering in three rates of speed. Recorded on zoom h2.

Turning on and off dremel and increasing and reducing engine speed. Recorded with zoom h1. Ligando e desligando micro retífica e aumentando e reduzindo a velocidade do motor. Gravado com zoom h1.

Stochastic component obtained from the analysis of a sound of erhu : http://freesound. Org/people/ricemutt/sounds/23933/. This was done using the harmonic plus stochastic model implemented in the sms tools: http://mtg. Upf. Edu/technologies/sms. The parameters used for the analysis were:. - window: blackman- window size: 1601- fft size: 2048- magnitude threshold: -90- minimum duration of sinusoidal tracks: 0. 1- maximum number of harmonics: 20- minimum fundamental frequency: 100- maximum fundamental frequency: 2000- maximum error in f0 detection algorithm: 5- max frequency deviation in harmonic tracks: 10stochastic approximation factor: 0. 2.

Harmonic component obtained from the analysis of a sound of erhu : http://freesound. Org/people/ricemutt/sounds/23933/. This was done using the harmonic plus stochastic model implemented in the sms tools: http://mtg. Upf. Edu/technologies/sms. The parameters used for the analysis were:. - window: blackman- window size: 1601- fft size: 2048- magnitude threshold: -90- minimum duration of sinusoidal tracks: 0. 1- maximum number of harmonics: 20- minimum fundamental frequency: 100- maximum fundamental frequency: 2000- maximum error in f0 detection algorithm: 5- max frequency deviation in harmonic tracks: 10stochastic approximation factor: 0. 2.

Electric wood sander sanding a sheet of ply wood. Hard, loud and abrasive sound, high volume low pitch. Recorded inside a workshop with a zoom h6 recorder. Audio was post-processed to boost the audio. Wood sander was a bosch 230v.

This is the sound produced by a voltmeter when it detects that there is electrical continuity. This tool is used at ubica lab (upf). Their research areas are enclosed within the general disciplines of ubiquitous computing, contextual intelligence and cognitive systems, using sensors and radiofrequency identificaiton (rfid).

Getting ready for the action! some noises of me putting on a tool belt, that can be used for some construction related audio, or even use it like the sound of an arness adjustment. No need for attribution, use this sound as you may want.

Synthesized clinking and clanking effect.

Holman nc4 pneumatic chipping hammer started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Unbranded straight die grinder started four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Tools traffic subway platform start to leave china.

Atlas copco r4n pneumatic hammer started four times and it sounds mellow. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Tascam dr100 mkiii.

Tascam dr100 mkiii.

A few sounds of using a normal metal screw-clamp. The sound has been close mic-ed. Recording equipment: akg c214 / focusrite saffire pro 24.

Bell-like sound created in pro tools by treating a hi-hat sample with the grm reson plug-in. I think of it as a blend of a gong, bell and triangle.

Sound of a measuring tape being extended.

A somewhat large drill powering up and losing power.

Moving the arm of an old coffee mill. Zoom h1.

1 bar of a toolbox close mic'd and playing at 114bpm.

Cutting a tile of wooden flooring with a handheld circular saw.

Twisting a socket wrench quickly once. Recorded with a tascam dr-40.

A piece of metal being dropped on the floor.

The sound of an electric screwdriver shortly running at different speeds.

The sound of an electric drill shortly running at different speeds.

Loosing a plumber tool from the wall. Recorded with zoom h1.

Sound of a bosch screwdriver recorded with a bm-8000 mic, edited on audacity.

Twisting a socket wrench multiple times at varying speeds. Recorded with a tascam dr-40.

Cutting a tile of wooden flooring with a handheld circular saw. Recorded in cluj, romania.

Sounds of using a power saw and increasing the amplitude and speed of the blade.

Attaching then releasing a metallic tool head. A pair of sennheiser me64s into a tascam dr40.

Three turns of a ratchet, mixed to sound a bit fuller. Recorded on cubase using an m-audio mic.

Bolt cutter opening the lock of a metal cage. It sends the lock flying with a sound that goes 'ping'!.

Someone welding part of a car. Senn 416 > sound devices 302 > tascam dr-40 48khz 24bit.

Desoutter ts144 pneumatic cutter started once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

The sound of going through an unorganized tool box. Recorded using a sony ic recorder and processed in fl studio's edison.

The sound of going through an unorganized tool box. Recorded using a sony ic recorder and processed in fl studio's edison.

Pretty fast engraving process sound (for the game, i guess?). Dethrok recorded the sound of engraving tool on metal, i just shortened it to 3s.

Vlc ratchet tightened four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

A pneumatic air tool (jackhammer) was used to lower some concrete blocks on the exterior of our garage. I was inside the house recording it with a zoom h2 recorder. So this was recorded through an insulated wall. This is the shorter recording.

Minimalist beat captured in a natural setting, probably some siding on a building being replaced. Mixes metal rattling (like screws or coins) with hammering and a low background voice. Portions have been looped and mixed, could be cut and looped in various patterns.

A 6-in-1 brass hammer being dismantled and put back together. I am aware that there are a few "pops" in the sound, but i am not completely sure how to remove them, so i left them there in case someone with more experience in audio editing wants them. The sounds i recorded from the smallest possible parts of the hammer are not included because they were way too quiet to be useful :1.

Dropping metal tools on concrete. Recorded in a garage using tascam im2 stereo mic & ipad2.

This is a trnsformation of the original sound: http://www. Freesound. Org/people/xserra/sounds/254374/ , with the parameters:. For synthesis:window type: hammingwindow size: 801fft size: 2048minimum f0: 160maximum f0: 260number of harmonics: 80threshold: -100minimum length of harmonics:. 1stochastic decimation factor : 0. 2minimum sine duration : 0. 1. For transformation :frequency scaling factors : [0, 0. 4, 1, 0. 4] <- (make frequency lower)frequency stretching factors : [0, 1, 1, 1] <- (no change)timbrepreservation : 1 <- (no change)time scaling factors : [0, 0, 1, 0. 7] <- (faster).

Mary had a little lamb, transformed by the sms-tools hpsmodel transformation, creating the effect of a voice changer, thereby anonymising the speaker's voice.

Operating garden snips.