569 로열티 프리 오디오 트랙들 "Resonance"에 대한

The wolves howl under the moon at night. Synthesizer used: v-station, 3 sine vcos, filter: just a little bit resonance, pitch modulation with lfos and wheel, eq and delay.

Binaural field-recording of my upstairs neighbors stomping from early in the morning until late in the afternoon. The recording is made in the bathroom, so, you can hear an interesting reverb and resonances.

A "singing bowl" from nepal, played with a contrabass bow. Recorded with a neumann 184 cardioid and a focusrite scarlett, for a project in the percussion room of my university, so may have background noise. The resonance may be cut. Feel totally free to use!.

Our town was testing the sewers somehow using audio tones to measure something. Maybe resonant frequency or something like that. It sounded vey musical since they were using 3 tones per octave, like a scale based on an augmented fifth chord.

I created this sound with additive synthesis ,using different eg`s and five different sounds for low ,middle and high harmonics. The pluck noise is a filtered noise at the resonance frequency of 523 hz.

This sound is part of a series and was originally a recorded finger snap. Recording gear:- 2 x behringer c2 small diaphragm condenser microphones with cardioid polar pattern- focusrite scarlett 2i4 audio interfacesoftware:- sound forge pro.

A drone sound i created using a dsi mopho, recorded in logic. I didn't use any fx. It's a filter sweep with some resonance and lfo 1 is modulating pan position.

Sinus wave connected to the filter cv1 in sweeps sound from mfb osc-03some reverb from ladik d-330(i have modified my wasp filter to achieve more self resonance. ).

A large pane of mirror glass sitting across two sawhorses is drummed on, making a surprisingly big resonant drum sound. At about 0:18 the inevitable happens: several extra smashing and shattering sounds are audible after the initial break.

Tapping large water bottles (metal) against a leg to hear them make melodic sounds. You can hear the slosh of the water inside and the resonant tone. Noise reduction and amplification were applied to this sound using reaper.

3 year old child playing a metallophone, a homemade percussion instrument consisting of tuned metal bars which are struck with a mallet to make sound, fixes to a wooden box which works as a resonating device.

Warning: harsh noise with resonant malefactors. Bad q ! bad q!. Noise sound through analog phase shifter and steiner parker filter through a holtech-based delay. I imagine this as a soundtrack to an ultraviolent horror movie scene.

Me flicking my toe into the metal section of my desk to simulate either hard footsteps on metal or metal being slammed into. Audio technica atr 6550 shotgun mic was used to record this sound.

Recording of a 28 inch subatomic gong where the sound reverberates in a 22 foot by 11 foot room (same ratio as the kings chamber in the great pyramid). Time between gong hits are allowed to let the sound resonate through the room.

I recorded the rain in brooklyn and wanted to make a blade runner kinda vibe for sleeping, there's a helicopter in there too, i threw in some low-frequency kinda whale/space ship noises.

I used a plug-in called harmor on fl studio 11 and i messed around with highpass and lowpass filters with a very wide resonance. Of corse you can use this ''thing'' for whatever you want because it's totally unoriginal and easy to make.

A kick drum did to my psytrance project called sonicmancer. I use u-he bazzile, filter resonate envelope in a sine wave. Hope u enjoy. Send me the track u did using this. . . I wanna listen =).

A little soundscape of an ostinato sequencer pattern with variations in duty and slide values. Realised on a modular system consisting of doepfer, ajh minimod, sputnik and circuit abbey modules.

This sound is part of a series and was originally a recorded finger snap. Recording gear:- 2 x behringer c2 small diaphragm condenser microphones with cardioid polar pattern- focusrite scarlett 2i4 audio interfacesoftware:- sound forge pro.

Hard finger rubbing rim of a champagne flute so it creates lots of crazy low resonance. Very suitable for scary sounds. Trimmed for looping. Stereo.

A large metal pot suspended on a rubber band. The pot is hit while spinning. Note: you may hear squeaking sounds or other artifacts in the compressed online preview. The file you download will not have these issues.

A piece of balsa wood being struck, and left to resonate in the air. Recorded with akg 414. The sound can be used for free (though it would be great to hear about what you do with it). It may not be re-distributed as it is, or as part of a compiled sound library.

A man singing with the sounds of the on coming train/ subway car, and mumbling along with the naturally amplified sound of the over head fluorescent lamps. -. Wav.

This sound is recorded with a h2 zoom and you could percieve the sound of openning and closing a wc door. You can perceive a closed space with resonances from some machine and where someone open a wc door and after a fews seconds door is closed.

Fire siren with fade in and fade out, change of frequency, of the starting phase, of and resonance. This song is normalized. It's like someone who is hearing a fire siren playing with his ears.

Chaotic resonances that soon falls into more and more chaotic behavior. Quite a smooth chaotic noise sound. Made from 2 sine oscillator frequency modulating each other and some variable controls. Programmed in chuck programming language.

This is a pack of 20 synthesized snare sounds with different "variables" for varieties. Wave forms slightly differ as well as the cutoff frequencies, resonance, and noise lengths are all slightly different from each other.

Fiddling with a disposable plastic comb, mainly by plucking and stroking the edge and side of its teeth with my fingers. I also play around with the comb in my mouth a bit, using the resonance of my vocal cavity to modify the sound, and also running the teeth of the comb over my own teeth.

A mono recording of the cheapest triangle i could find at the music store. 3 single hits of the bars, a few closed hits and a finger cymbal ding as a bonus. Gear:neumann ltm-103arturia audifuse. Format:wav 48khz 24bit mono.

Raindrops hitting my bedroom window. Recorded in carson, ca. Used a zoom h6 with the xy attachment and windscreen on, pressed mics against window for a contact recording. This was done in order to capture full resonance of the glass. (geotag is not at my actual address, but a nearby location. ).

Sound made by bowing a detuned guitar tied to a clothes hanger. Recorded with two contact microphones. No effects were added, the apparent reverb tails are the waves resonating within both the guitar and the metallic clothes hanger.

A high quality shrill screech produced from large metal panels scratching against an old atx panel using it's edges. I imagine derelict buildings with steel slide doors being open slowly or a blade dragged on the ground.

A wind chime with eight metal tones surrounded by a bamboo resonance tube. A1-d2-f2-g2-a2-d3-f3-a3. Ortf wide stereo fieldrecorder: tascam dr-60d mkiimicrophone: 2x røde m5.

Cinematic impact. Dark, distorted, large, powerful. Original samples made using an acoustic guitar as a resonator for an electric bass, and recorded using a zoom h4n. Processing includes layering, reversing, amp simulation, distortion, delay and reverb. Recorded for my personal a sound a day challenge (asoada).

It is what the title says "modified doepfer a-124 vcf5 wasp filter"listen and you will understand ;-)i the middle of the sound/beat i turn up resonance. I have connected cv2 to the bass pitch signal. Funny effect.

This is a sample of a classic (diy) dubsiren build by me. Its a squarewave synth modulated with a squarewave lfo. The sample is dry. Add delay and some chorus, reverb, (resonant) (auto) filter or so to get the typical dubby soundsystem style.

Tiny and resonant impacts with a tiny piece of metal on a tea cup (china like). Tonality: c-c#. Recorded with zoom h6 and clippy em184 from fel electronics. Light denoise with rx 7 spectral denoise.

Taking a medium blade out of its sheath. One arm sword, big knife, or dagger, for foley or game effect. Same sound without the high pitch metal resonance in the pack.

Plucking the very high, tight strings above the nut on an electric fender bass. Perfect for interesting or creepy sound design. Recorded with a zoom h4n.

Fiddling with a disposable plastic comb, mainly by plucking and stroking the edge and side of its teeth with my fingers. I also play around with the comb in my mouth a bit, using the resonance of my vocal cavity to modify the sound, and also running the teeth of the comb over my own teeth.

Rubber bands stretched evenly between drawer handles being twanged, producing a high pitched melodious tone. From an old cassette, recorded 1985. Another upload of the same recording to remove a click from the first few seconds, using the audacity removal tool.

While i was playing around with some "extreme settings" on my technosaurus micron, this rhythmic structure came out. The bleeps are from the resonance of the 12 pole filter, driven by the lfo. Recorded directly into audacity through my macbook internal soundcard. Info on this synthesizer: http://www. Vintagesynth. Com/misc/microcon. Php.

While i was playing around with some "extreme settings" on my technosaurus micron, this rhythmic structure came out. The bleeps are from the resonance of the 12 pole filter, driven by the lfo. Recorded directly into audacity through my macbook internal soundcard. Info on this synthesizer: http://www. Vintagesynth. Com/misc/microcon. Php.

Samsara ekd was used for the kick, sent through eq and a couple of distortion plugins. Black noh snare was used for the snare, with a resonator and reverb placed on top of it, as well as eq and compression. Hcx was used for the hihats, with one eq plugin placed on it. The master channel got brickwalled (or bricked) using compressivecm vst.

Basically i connected one lfo to the polivoks in. Now when i think of it. Wonder if that added something…. And how much. And to cv1 i connected a square wave and to cv2 a wide frequency sine wave. Resonance at max. Think i have to reanalyse this patch later… i’ll be back!.

Recording of water running down the bathtub drain after the bathorganic rhythms are emerging out of one another as the water is whirling down and getting less in volume as the whirl changes in speed and volume and resonance with the metal tub and the drain tuberecorded with a stereo microphone on minidisc the microphone left dangling and turning over the water to create random panning.

This second sound is a recorded sound of a bike chain, i modified it using some effects :1-normalize2-wahwah effect with-frequency = 3. 3 hz-start phase = 0-depth = 70%-resonance = 2. 5-wah frequency shift = 30%3-melt closingthe final sound gives an impression of a sound under water.

See title &. . . Https://freesound. Org/people/strangehorizon/sounds/650457/warning: the original [#650457] is waaay too loud. Vst plugins used on this remix include. . . Sp3ctr3. . . Https://www. Kvraudio. Com/product/sp3ctr3_by_st3pan0vavalhalla supermassivevalhalla spacemodulator.

I washed up some glasses and found them making a loud dripping noise when left on to dry. The water was dripping off the glass onto the corrugated drying side and forming a little wall with each drip, each time there as a drip the wall broke transferred the vibration on to the resonating tumbler.

For creating this sound i used:handmade didgeridoo of pvc tubessound picked by microphone akj-xmk03effects used in post:in guitar rig 4:1. Tube compressor2. Ac box amp3. Studio reverb4. Twin delayin audacity:compressor.