356 로열티 프리 오디오 트랙들 "Sine"에 대한

Done by sound forge fm synthesizer. Basically four added sine waves, each has some percentage of self-modulation(feedback). The sound effects chain applied over the initial sound is: reverb, chorus, upward compression(sound forge wave hammer), pitch shift(down) and finally vibrato, to simulate a varying speed tape machine.

Reel for the makenoise morphagene. Recordings from the analog studio in den bosch, the netherlands. Old electronic measuring tools used to test rf equipment. Oscillators through a bandpass filter and ring modulation with a lot of feedback. Switching noises. Pure sine. Phase locked loop. Things like that. Enjoy.

An 8bit text blip, like you would see in an old visual novel. The sound is meant to play as text is being added on screen for a character speaking. Created for an upcoming visual novel/puzzle game called burden of proof.

An 8bit text blip, like you would see in an old visual novel. The sound is meant to play as text is being added on screen for a character speaking. Created for an upcoming visual novel/puzzle game called burden of proof.

Bass warning!a 13second sinewave, the tone sweeps up from exactly 20hz to 190 hz then stops. It was recorded in logic pro & i use it from time to time to do sub sweeps. If your speakers are loud please don't have them cranked up without hearing low first.

An 8bit text blip, like you would see in an old visual novel. The sound is meant to play as text is being added on screen for a character speaking. Created for an upcoming visual novel/puzzle game called burden of proof.

I'm trying to create a sound that resembles captain america's shield from the marvel movies. I took a recording of a metal garbage can ringing and brought it into iris 2. I cut the attack from the envelope and added light amplitude sine wave modulation. I also set a short decay. I also layered a clean sine wave underneath the recording sample in order to give the recording more umph and body when it resonates. This is the base of captain america's shield. Layer this with metal impacts and sub sonic stings and you're all set. Please post a link if you use this file. I'm excited to see what you can do with this!. Text me if you want to have fun and talk gear. I love hearing what people are up to!702-860-9869.

A sequence of beeps from vst instrument p8 at 120 bpm with some effects applied. Created for the continuum 4 project which can be found here:. Http://www. Freesound. Org/forum/dare-the-community/32704/.

Four seconds of 1khz. You've probably heard it before in a tv test pattern or to censor out swear words. You can use it for any of these and more, you don't have to credit me! (this sound has a creative commons 0 license)thanks, and have fun with this sound!kwahmah_02.

Generated in audacity, this sine tone has an elevated pitch with lowered gain to emulate a generic censorship tone you would hear on public television. The tone is suitable for use in any field, most notably in video games, films or animations. Whether it's comical, functional or both, this tone is a viable resource for censorship detail.

As usual. . A triple osc was used. I played with the different possibilities. . . Sine, triangle, saw, square waves were used here. It may cause damage on high volume (maybe?). Effects: phaser, reverb. After recording, the entire soundshape was inverted.

Basically i connected one lfo to the polivoks in. Now when i think of it. Wonder if that added something…. And how much. And to cv1 i connected a square wave and to cv2 a wide frequency sine wave. Resonance at max. Think i have to reanalyse this patch later… i’ll be back!.

No, i cant really describe what this is! but i use a ring modulator. Two audio signals goes in. I guess the side band frequencies goes out??? or?! anyway the original frequencies are also in the mix. So, two audio signal and the result from a diy ring mod. Have to learn more. . . Read below!!! in this sound you are listening to, the result, the ring modulation, carrier signal and modulator signal. After some research. . . I write this for myself. . . Correct me if i'm wrong!!!from youtube (audiocollage)ring modulation is the sum and the differences of the carrier and modulator signal. Feed the ring modulator with 261,626hz and 391,995hz and you get (261,626 + 391,995) 653,621hz and (391,995 - 261,626) 130,369hz. From wikipedia". . . Neither the carrier nor the incoming signal is prominent in the outputs, and ideally, not at all. "". . . In the basic case where two sine waves of frequencies f1 and f2 (f1 < f2) are multiplied, two new sine waves are created, with one at f1 + f2 and the other at f2 – f1. The two new waves are unlikely to be harmonically related and (in a well-designed ring modulator) the original signals are not present. It is this that gives the ring modulator its unique tones. ". Above is true when using pure sine waves! waves with no harmonics. I have a passive diy ring modulator. I guess it's not acting "perfect". . .

More smooth and quicker ring. Sine expressionsin(2*pi*t*725)*exp(-t*5)*(1-exp(-t*30))+(step(t-5)-step(t-. 3))*sin(2*pi*(t-. 3)*565)*1. 3*exp(-(t-. 3)*5)*(1-exp(-(t-. 3)*30)).

I have created a synth pitch on the daw renoise which sounds similar with the magnet from transformers 4. I hope you like it and use it :).

110 bpm, c notes, middle c, with a 1/4 wobble, half as sine, half as sawtooth descending, with random sounds and filters. Used : http://www. Freesound. Org/people/spankmyfilth/sounds/214265/with one more note.

110 bpm, c notes, middle c, with a 1/4 wobble, half as sine, half as sawtooth descending, with random sounds and filters. Compressed a bit to give ti the full sound. Useful for games or music.

Makenoise in all its glory qpas x-pan morphagene, erbe-verb,mimeophon,processing dpo sine and square wave outputs. Sequenced by 0-ctrl. Recorded into reaper and rendered at 48khz 32 bit fpwith markers for all you morphagene fans out there. Enjoy the wierdnes!.

Are there a million of these sounds in film trailers? are there a million of these sounds on freesound? not sure. Started with 100k tone - pitched it down over time - it was too low, so then i pitched the whole file up a bit. Insert to make any slow mo sweeping matrix style scene look even more awesome. . . Or not.

The loop was created with one of reaktor 5's instruments which was modified to create 4-second loops that sounds something like techno or general electronica. The drums are all created using a subtractive synthesizer, most of them sine waves and were modified several times.

Example of how the four major waveforms sound compared to eachother. Warning: loud! this is full amplitude, so sawtooth and square in particular will appear louder than your average sound. Sound generated using the go-sound golang programming library:https://github. Com/padster/go-sound. As part of the demonstration program:https://github. Com/padster/go-sound/blob/master/runthrough. Go.

110 bpm, c notes, middle c, with a 1/4 wobble, half as sine, half as sawtooth descending, with random sounds and filters. Compressed a bit to give ti the full sound. Useful for games or music.

Jim, according to technology, this person is dead. 1200hz sine made in audacity. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

This is a classic theta brainwave entrainment sound made by two sine waves. The pitch shifts gently to produce some slow variation of the actual speed of the pulse. You can use it as a track and add voice (like relaxation or visualization), or just use as is to promote deep relaxation or trance. The pulses are about 8 hz (cycles per second).

A simple recreation of the "flint phone" sound effect using sine waves. This effect originally appeared in the film, "in like flint" as the presidential "red phone" sound effect. It later appeared in the film, "austin powers: the spy who shagged me," as austin powers' car phone ringtone.

Made using two synths. One is a noise generator that has been pitched down three octaves. It has a 12-hertz sine tremolo on either side, one of which is offset by half a wavelength. The other synth is a deep organ playing e3 and g3. I cut the sound in audacity, and the waves line up perfectly, so you don't need to worry about looping it badly.

A retro "fire the projectile" sound in an old-school 8-bit video game. Sounds like it should be on an enemy instead of the main player since it's quite dark and hollow. Generated with a periodic 1-bit noise pattern.

You can use this sound in any project you want, but please also consider supporting me via patreon (1$) : https://bit. Ly/patreon22.

A simple sine-generator piped through a slew of wacky effects automated with randomized lfos. I added some cabinet emulation to give it a 'living room' feel but left it dry enough to add additional stereo/reverb processing. P. S. It loops cleanly. Software: bitwig studio.

You can use this sound in any project you want, but please also consider supporting me via patreon (1$) : https://bit. Ly/patreon22.

For this sound, i generated a sine wave at a frequency of 440 hz, an amplitude of 0. 80 and a duration of 1 second. I choosed the following effects:1- tremolo2- repeat (x2)3- fade in (half of the sounds)4- fade out (the other half of the sounds)5 -studio fade out6- cut a part7- repeat8- cut to have the song 3 times. After all this effects, the sound is like an alarm.

Created from an altered version of the "sine jingle" audio i uploaded,this clip is meant to mimic the sound of casting a healing spell in an rpg. -----------------------------------------------------------------------. This sound, like everything i upload here,is completely free for anyone to use. You may use it however you please. I hope it is useful. 🎶.

This helicopter sound design was created at fl studio, in the sytrus synthesizer. The sound consists of four layers. 1. Sine wave frequency of 44 hz. Simulates the low frequency noise of propeller blades. 2. White noise passed through the svf filter. Simulates the noise of propeller blades. 3. Saw wave. Simulates the sound of an engine. 4. The sine wave. Imitates a high-frequency whistle of the engine. Various modulations are applied to all waves through the envelopes of the synthesizer. Next, the signal on the mixer channel is processed by a multi-band exciter and equalizer. Then a signal was sent to two channels with delay processing. One of them imitates reflections. In the lower-middle frequency range. On the second in the upper-middle frequency range. As you approach the sound source, the volume parameters of the direct and reflected signals are automated, low pass filter, pan width and equalization of direct sound. The helicopter performs strange maneuvers, as if making constant circles during the approach to the listener. I did not seek to create the veracity of these maneuvers.

Created from an altered version of the "sine jingle" audio i uploaded,this clip is meant to mimic the sound of casting an escape/dungeon exiting sound in an rpg. -----------------------------------------------------------------------. This sound, like everything i upload here,is completely free for anyone to use. You may use it however you please. I hope it is useful. 🎶.

Simple synth snare + 3 higher speeds. ⸻ "how do you make a classic synth snare, do you just take white noise and go like. . . " *goes like* ". . . Huh" yep you just go like. (going like consists of setting an oscillator to sine with just a release tail and noise + a lowpass snapping up and trailing off gently + compression/distortion of some sort + high frequency shelf snapping down from high gain and then back up).

Night vision turn on sound for video games. Made with rutgermuller's light switch sound https://freesound. Org/people/rutgermuller/sounds/51156/ and audacity generators and effects (three sine waves 1000hz/2000hz/4000hz, sliding pitch shift, fades, reverb, low pass filter, normalization in not that order and exact details i did forget).

I made this as a near ultrasonic sms signal. Created and edited with audacity, filtered with glame bandpass filter. If you hardly cut a pure tone, you introduce a whole lot of other frequencies to the signal at the cutting point. To avoid this after the cutting you need to filter the whole thing with a bandpass filter to ensure you have as little other frequency content as possible. It will audibly soften the start and the end of the sound. That's what i did here.

Noise of a solar power dc-ac inverter on a sunny day. A static hum with some kind of a rhythmic modulation. Sometimes other noises like a bird singing outside, however mostly the pure sound of the inverter. Recorded x/y stereo with at4041 mics into a pmd661 recorder. Eqed in fabfilter, there used to be a sine beep at 15. 8khz, inaudible for many people but it would have been even more annoying for those who can still hear it.

Ambient echo sound. This sound required the combination of operator using the triangle wave and plenty of reverb. I layered this sound by using two different octaves to cover most frequency ranges that sounded best and to fill any gaps in the sound effect. This sound is inspired by scene transitions and wide shots where there may be a lack of other sounds so this frees up a space for a calm ambient sound that uses plenty of sustain and reverb. The triangle wave in the operator gave it more of a high pitched calm flowing sound. The other options for example sine wave sounds to harsh and sharp for this type of sound.

I wanted to make a very gentle wakeup alarm for my android phone. It's a 25-minute long fade in of a pure 3-khz tone. Created with audacity. I encoded this to ogg vorbis for personal use, but i'm sure you can do this better for yourself (maybe you'll prefer other format), so here you have a quality flac file for source.

Inspired by a discussion on the ambient online forum:https://www. Ambientonline. Org/forum/ambient/sound-design/92341-how-to-synthesize-drum-sounds. Used the subtractor synth from reason. Please refer to the pack description for a full list of the sounds synthesized. Ao_subtractor_snare_2_1. Reason subtractorosc 1 is off (set balance 100% to osc 2 + noise). Osc 2 set to sine wave, oct = 3. Noise decay = 127, noise color = 127, noise level = 127. Filter set to low-pass 12 and completely open (=127). Amp env decay = 44.

This is a trnsformation of the original sound: http://www. Freesound. Org/people/xserra/sounds/254374/ , with the parameters:. For synthesis:window type: hammingwindow size: 801fft size: 2048minimum f0: 160maximum f0: 260number of harmonics: 80threshold: -100minimum length of harmonics:. 1stochastic decimation factor : 0. 2minimum sine duration : 0. 1. For transformation :frequency scaling factors : [0, 0. 4, 1, 0. 4] <- (make frequency lower)frequency stretching factors : [0, 1, 1, 1] <- (no change)timbrepreservation : 1 <- (no change)time scaling factors : [0, 0, 1, 0. 7] <- (faster).

Lazer sound. I made this lazer sound with the use of operator in ableton as well as adding a few effects to help round it out. I started with a basic sine wave and then began to adjust the frequency range to cut out some of the low end of the sound and enhance the high end to make it more realistic and movie accurate. I also had to shorten the decay time so it is more of a short zap sound than a prolonged note. Another step was giving it an initial high pitched sound and this was achieved by having the sound start higher up the scale with semitones and then dropping down giving the effect of shooting and something traveling from the source sound.

Dubstep bass: 110 bpm wobble at 1/16th note, half of the samples as a sine lfo and saw lfo descending. Sampled in ableton using massive, compression using psp compressor2. Random presets with lfo settings on key parts, and very little other effects used, mostly so this sample can be re-sampled. 110 bpm so it can be pitched up which is usually better then having to pitch samples down.

Dubstep bass: 110 bpm wobble at 1/8th note, half of the samples as a sine lfo and saw lfo descending. Sampled in ableton using massive, compression using psp compressor2. Random presets with lfo settings on key parts, and very little other effects used, mostly so this sample can be re-sampled. 110 bpm so it can be pitched up which is usually better then having to pitch samples down.

Dubstep bass: 110 bpm wobble at 1/8th note, half of the samples as a sine lfo and saw lfo descending. Sampled in ableton using massive, compression using psp compressor2. Random presets with lfo settings on key parts, and very little other effects used, mostly so this sample can be re-sampled. 110 bpm so it can be pitched up which is usually better then having to pitch samples down.

Dubstep bass: 110 bpm wobble at 1/16th note, half of the samples as a sine lfo and saw lfo descending. Sampled in ableton using massive, compression using psp compressor2. Random presets with lfo settings on key parts, and very little other effects used, mostly so this sample can be re-sampled. 110 bpm so it can be pitched up which is usually better then having to pitch samples down.

This is a trnsformation of the original sound: http://freesound. Org/people/ricemutt/sounds/23933/ , with the parameters:. For synthesis:window type: blackmanwindow size: 801fft size: 1024minimum f0: 100maximum f0: 2500number of harmonics: 20 (we don't need too many harmonic here)threshold: -100stochastic decimation factor : 0. 1minimum sine duration : 0. 1. For transformation :frequency scaling factors : [0,1,0. 4,1,0. 6,0. 9,1. 0,0. 5,1. 2,0. 3,1. 4,0. 6] <- (make frequency variation steady)frequency stretching factors : [0,2,0. 5,1,0. 51,0. 7] <- (create a frequency variation, high->low )timbrepreservation : 1 <- (no change)time scaling factors : [0, 0, 0. 8, 1. 5,1. 0,2] <- (make some "free fall" feeling).

Wrote/recorded a free dance tune at 120bpm using ableton live 9. The notes revolve around: c, g, d, e, dableton stock drum rack w/ stock samples for the percussion section. Mod amp sine bleep for the side toms. Ableton stock grand piano for piano. Muggy stock plugin for the synth-like parts w/ pitch bends in the midi. Synth1 vst64 for the long sustaining notes during the rhythm synth parts. Other notes about this recording:-14. 0 lufs integrated. -1. 4 db true peak max. Hope this helps and is useful for your next project. Cheers,bainmack. Youtube. Com/bainmack.

While attempting to create a sick ass dubstep wob noise in rob papen's albino synth plugin, i managed to stumble across a telephone-like sound while pitching the filter cutoff on a weird shaped wave oscillator. I then put down the dubstep tune, and exported the noise with a gradual huge reverb at the end just for fun. I hope you enjoy it and i'd love to hear if someone uses it and in what context!. If you're interested in hearing my music (shameless plug) you can do here:. Https://soundcloud. Com/damnd_music. If you'd like the preset this sound was made using, i have saved it here:. Https://dl. Dropboxusercontent. Com/u/7506813/telephone%20bleeps. Aupreset.