174 Royalty-Free Audio Tracks for "Impulse"

Impulse responses based on public domain recordings of historical events from around the world and from space. Some processed to stereo artificially. Gun shot in texas.

Impulse basic waveform 12 bit recorded.

Phase impulse waveform 12 bit recorded, looped at 300 bpm.

Used ableton by me.

Fostex 31801980's spring reverb studio effect. Impulse response taken with sine wave sweep and deconvolved using reaper. 44. 1khz 24-bit flac.

Impulse response of the cabinet simulation on the ax1500g unit. These are sounding really nice.

An impulse response i made of the spring reverb found in the roland re-301 chorus echo (1977) running into a mackie 8bus desk at "optimum" levels. Made and processed in reaper.

Rca tape cartridge simulation impulse response: this will bring you back that dark tone found in 60s lo-fi recordings, perfect to use on your mix bus.

Impulse response from a teisco 450e delay/chorus effect unit. Old and grungy delay with max feedback. Requires lots of filtering before use but authentic and rare. .

Cleaned up with space in between for convenience.

Can be used as a body or any heavy item that is not metel or anything hard.

For those who like a vintage sound, this impulse response tries to be the most faithful in the type of spring reverb used in the 60s, on vocals, on guitars, and mainly as a mixing reverb as an alternative to plate reverb if do you want the sound of a garage rock or dub. Depending on the context, you can leave the reverb in mono which reinforces the vintage character.

Reverbed and reverbed until there was just some kinda sounding rumbles up in the infinite space. Edit:corrected title, kinda, according to gauravnema kind and much appreciated attention.

Hi guys, i'm back. For years i haven't uploaded any sounds except my news themes, (thanks to you for your nice comments and thousands of downloads)now i give you an impulse response i made to check how my mixes would sound on a typical living room audio setup (but listening with headphones). The chain: technics hifi-system, multi-cone speakers, audix reference microphone, focusrite preamps. To use it like intended, just load this file into a convolution plugin in your master insert. You'll hear your mix like sitting. . . Well. . . In my living room. It'll sound muffled to you, that's because i captured the ir and all the reflections with an omni-directional mic and i have thick curtains ;-dof course it can be used as a really, really nice and natural-sounding ambience ir, too. Use it as an aux-reverb).

Impulse response of interior of a parked 2007 kia cee'd estate, recorded with a zoom h1n on 28/01/2021.

A recording of an air rifle being shot in a valley. Recorded on a zoom h4n pro about 5-10 metres in front of the barrel, facing away from the rifle. Edited in audacity. I love the crackle as the shot breaks the sound barrier. Could be slowed down to make it sound like a larger weapon, or maybe even used as an impulse response. I have also uploaded the unedited version in case you want to apply your own effects: https://freesound. Org/people/fission9/sounds/466311/. Recorded 14/04/19.

A couple of impulse responses from the capricorn caves in central queensland, australia, nice for anything.

A couple of impulse responses from the capricorn caves in central queensland, australia, nice for anything.

Ir - impulse response of a forest (5m). Ir - forest (10m) : https://freesound. Org/s/558824/ir - forest (20m) : https://freesound. Org/s/558823/. Gear : rode nt4file: 96khz, 24 bit, stereo, wav.

Balloon pop to map the reverb in a space, you can then use it to make your own convolution reverbs.

Ignition of my gas cooker with electric impulses. Recorded with olympus ls-5.

Were experiments with algorithmic reverb, trying to create the reverb style used in the 80's.

Warning: files can not be undeleted, not even by administrators!i re-uploaded the sound because there was an error connecting to the https://freesound. Org server. Estimated start pitch: a♯/b♭1 (59. 940 hz)this is an impulse of 59. 94 fps video (see why tv is 29. 97 fps and the horizontal frequency is 15734. 266 hz). I created this in audacity!. Silence: 1001 samples at 60000 hz, except the first sample is of amplitude 0. 25. Attribution is not required, which means that i, therandomsoundbyte2637, need not be attributed to use this!. Sample rate is 60 khz because of the 59. 94 hz.

This is a sum of two units, a digital reverb ams rmx16 and spring reverb fisher k10 with gate, this was an experiment i wanted to do and by the way, it worked well.

Experimental irs for convolution reverbs.

A digitally modelled impulse response of a location. I use these impulse responses for sound implementation in games, but some of these work great on musical sources as well.

Impulse response of the famous digital reverb unit rmx16, in its most popular configuration: nonlinear.

I recorded me clapping in my favourite tunnel of my village and made irs of it.

A recording of an air rifle being shot in a valley. Recorded on a zoom h4n pro about 5-10 metres in front of the barrel, facing away from the rifle. This is the unedited version (albeit slightly trimmed) for those who wish to apply their own effects. You can find the edited version here: https://freesound. Org/people/fission9/sounds/466310/. Recorded 14/04/19.

Studio technologies - stereo simulator (generation ii). Https://studio-tech. Com/products/generation-ii-stereo-simulator/. The generation ii stereo simulator from studio technologies creates a convincing stereo imagefrom a mono audio source. The fully mono-compatible signal simulates space withoutreverberation by using random, non-recursive filter techniques. The mode switch (found on the hardware unit) controls the overall sound of the generation ii. In the music position, the full audio bandwidth of the input signal is simulated. This mode isappropriate for audio material with little or no voice-only content. In the music & voice position, the input signal is sent through a band-reject filter prior togetting sent to the simulator circuits. This creates stereo simulation over the low and highfrequency range, while limiting simulation in the voice band. This mode is appropriate for audiomaterial that contains voice-only content, such as a film track or television show. The stereo intensity control determines the amount of stereo simulation that is produced. Inthe fully counterclockwise position (ir files “0” – included for process comparison), no simulatedstereo is produced. The mono input signal is sent equally to the left and right outputs. As thecontrol is turned clockwise (ir files “1 – 6”), the amount of stereo simulation increases.

Impulse response file for use in convolution reverbs. I recommend convology xt by impulse records, free and easy to use. Recorded in a glass box of a hotel shower. And we all know glassy resonant shower reverb is the best. Recorded with a sony d100. Self-reminder to bring more balloons next time.

Recorded a clap in my bathroom with no shower door or curtain with a zoom zh1 @ 96khz 32bit, denoised with izotope rx, flattened spectrum slightly by matching with pink noise.

Impulse response file for use in convolution reverbs. I recommend convology xt by impulse records, free and easy to use. Recorded in a glass box of a hotel shower. And we all know glassy resonant shower reverb is the best. Recorded with primo em172 omnis plugged into a sony d100. Self-reminder to bring more balloons next time.

Impulse response generated from field recordings of a parking garage. Recorded using an audio technica bp4029 m/s shotgun microphone into a zoom h4n recorder. This recording is part of a pack of impulse responses comparing different recording and post-processing techniques. A full explanation of the experiment and recording process is presented in this video: https://youtu. Be/nm65zx3u7me. Sweep recordings were deconvolved using voxengo deconvolver.

This audio is not a sound effect itself, however it can be used with an impulse response plugin to recreate the acoustics of a particular environment. This particular file is designed to replicate the acoustics of distant muffled club or rave. This was done using the "profiler stereo lsp plugin" and placing the microphones on the opposite corner of the speaker in a highly reverberous house forcing the audio to reverberate around a corner. After this, a low frequency boost was applied in post along with other general cleanup of the audio.

I've recorded this by accident. I left ardour recording on my laptop via zoom h2 and forgot about it. Meanwhile my cellphone must have communicated with the gsm network, and the zoom h2 have captured the signal. Luckily no background noise is present. Enjoy this annoying sample :).

Recorded a clap in a quiet winter snow-covered forest in rural ontario. Can be used for an impulse response. Not ideal, but interesting anyway! recorded with a zoom h2n recorder.

Custom metronome sound recorded with a zoom h6 xy.

An impulse response, made with vital softsynth, simulating the responce of a bunch of strings tuned to notes of bohlen—pierce scale. Specifically, a middle ground between 13 equal divisions of a tritave (interval 3/1) and the just-intonation bohlen—pierce scale. (for no particular reason. ). Convolving with this might add some xen flavor to your sounds, even if you play in standard tuning 12edo. I tried it with surge xt’s hammered dulcimer patch (i love hammered dulcimer!) and heard some additional shimmering.

I made changes in the impulse response of the fisher k-10, i used a demo of the fisher spacexpander on youtube that had a warmer sound, i did eq match using small sections of the video where the audio is dry or wet, i did this sin several times and the result was fantastically similar. The reference used: https://youtu. Be/17x9fqbjbfw.

Example keys processed with ir dbl ms verb first dry then wet then wet stretched.