181 Royalty-Free Audio Tracks for "Repeat"

I have built a nonlinearcircuits sloth lfo, the regular version. Sloth is a chaotic lfo. The output is based on the lorenz system. It is a system of ordinary differential equations. It is notable for having chaotic solutions for certain parameter values and initial conditions. In particular, the lorenz attractor is a set of chaotic solutions of the lorenz system which, when plotted, resemble a butterfly or figure eight (very much from wikipedia). The sloth has two outputs x and y. Think of them as coordinate pairs. The output will probably never repeat itself but there is a pattern. I have built the regular sloth it usually takes approx 15 seconds to make a rough figure 8, one cycle in the “butterly”. The knob changes the chaotic pattern. At some settings the signals will spend more time in one strange attractor than the other. Now i’m testing the module in different ways. In this sound i have connected white noise to a filter. The filter frequency is controlled by sloth (x output). In this patch i have set the initial frequency at 12 o'clock. . . The output sound from filter goes to reverb.

The sound is coming from the fans of a server. By pulling out one of the fans, all other fans turn up to 100%. The microphone is located above the air duct exactly in the middle of the case and thus between two fan fronts. The soundfile starts with the fans on standard speed. After a few seconds the fans turn up to 100%. I left them there for a few seconds and then quietly plugged the removed fan back in. This fan now also switches to 100% - this is the single, delayed "speed up" that can be heard from second 35. About 10 seconds later, all fans return to normal speed. Unfortunately, a colleague came in at that time and ended up talking into the recording. Due to lack of time, i was unfortunately unable to repeat the audio that day, but will certainly do another re-recording in the future. Feel free to use the sound; no attribution required. Feel free to write me in the comments what you used the sound for. Equipment:røde lavalier microphonesound devices mixpre-3 ii. File:wavmono96 khz32-bit float.

Po-12 beat that that repeats.

Computer voice repeats "will you be my friend?" with effects.

Yep this is a crazy sound. What have i done. . . I have build a nonlinearcircuits sloth lfo. Https://www. Modulargrid. Net/e/nonlinearcircuits-sloth-4hpedited info:i have built the regular version. The sloth has two outputs x and y. I connected x to control frequency on one oscillator and y to control amplitude on another oscillator. Frequency experiment on left channel. Amplitude experiment on the right. The file starts as the amplitude is 0. Next time the amplitude is 0 (almost) is at about 48 sec. Then 48 sec later, at 1:37 the amplitude is 0 again. The two cycles are not identical. The tones are harder to analyze. . . X and y outputs. I guess those corresponds to x and y in a coordinate system. You can find video clips watching the sloth “drawing” butterfly wings. For example:https://www. Youtube. Com/watch?v=0ku6npz1s4gand maybe check this:https://www. Youtube. Com/watch?v=occhcm5oxp8http://nonlinearcircuits. Blogspot. Se/2014/09/sloth-chaos. Htmlthis later link is the developers page. The constructor (andrew) of this module says that my version completes “1 cycle every 15 seconds”. What does that mean? is one cycle one lap in the butterfly pattern? will the pattern repeat itself? yep, i’m going to ask him…. Edit:andrew answers my questions: “it is a very approximate description of the frequency, cycle is not the proper term to use. . . . Nor is frequency really, but they are descriptions that people can relate to easily. Depending upon the pot settings and whatever other initial conditions that happen to be in place, the signal may traverse the typical double strange attractor path. It may stay in one attractor for several loops before crossing over to the other one. The pattern will never repeats itself, it might come close but won't do it. ”my question: so, one “loop” is one cycle?andrew answers: typically it takes approx 15 seconds to make a rough figure 8, but depending upon the pot and other factors, it may take longer, much longer, sometimes it even pauses whilst deciding which way to go next.

Using a simple chuck script. It selects 4 tones from the 12 tone scale and repeats them.

Inserting and removing game boy advance game cartridge from gba console. Recording first inserts, then removes, then repeats once more.

Forward with NOAA the NOAA Corps Song The "NOAA Corps Song" is actually entitled "Forward with NOAA." In 1987-88 the National Association of Commissioned Officers (ACO) was interested in commissioning a NOAA Song. Captain (then Commander) Steve Manzo was a member of the ACO Executive Board and volunteered to assist. Manzo contacted a long-time friend, Bob Arberg. Bob's father, Bud Arberg, had actually written the music and words to the "Army Song" -- while assigned to the Adjutant General's Staff during World War II. Dr. Arberg (former Princeton graduate in music) was retired and he readily volunteered to write a song. Dr. Arberg was provided reference materials on the NOAA Corps. He recognized at the outset that this was an attempt to build NOAA Corps morale and he cautioned that buy-in/acceptance within the Corps would not be easy. The song was first presented at a National ACO Dining-In in either 1988 or 89. Secretary of Commerce William Verity was present, as were both Bud and Bob Arberg. Bud Arberg played the piano and performed the "NOAA Song" to the assembled group of 150 officers and guests. Upon completing the NOAA Song, Secretary Verity graciously presented Dr. Arberg with a small gift of thanks on behalf of DOC/NOAA/NOAA Corps. The music was arranged by the USAF Band. The words are as follows: Forward with NOAA With the Corps that's got it all Science and Service We are always there to meet the call We survey the oceans And we track storms in the air Forward with NOAA We're the NOAA Corps, we're always there -- Musical Interlude then Repeat -- Forward with NOAA With the Corps that's got it all Science and Service We are always there to meet the call We survey the oceans And we track storms in the air Forward with NOAA We're the NOAA Corps, we're always there

This is voice over i created for the production of "sleepy hollow" for karamu theatre. The name "icabod" repeats several times with echo effects added.

Double beep cell phone notification repeats 4 times. Samsung galaxy s3 cell phone notification recorded with an h1 zoom recording device.

This rendering is of an airport security message we have all heard. Low voice tone with echo compressed, just repeats the message airports use today. Use as you like.

A low bassy throb created using audacity. I initially used the 'risset drum' creator. Then randomly altered pitch and speed, increased the bass, then copied and pasted repeats.

Synthetic guitar-like riff with strong wah-wah effect; riff repeats at different pitches to form a simple melody. Useful as a ringtone that grabs your attention, but is not annoying or grating. Created with audacity.

For my own obscure reason i took file 389436, looped it so that it repeats at 60 bpm, added about 25% echo, then added bilateral panning at 15 cycles per minute (cpm).

Create 'tăng lực' sound:audacity:- create→add new→mono track. - generate→chirpwaveform: square• startfrequency (hz): 1000amplitude (1-0) : 0. 8. • endfrequency (hz): 3000amplitude (1-0) : 0. 3interpolation: linearduration: 0. 100s. - effect→repeatnumber of repeats to add: 2.

Sad piano keys sound in a minor key for the atmosphere, good for background for cinematic drama, strong rhythm accompany, sequence repeats, for you to use. Let me know what you think. Recorded with audacity and magix music maker ultimate.

A high-end cigar cutter recorded somewhat far away from the microphone. The sound starts with a cut, and then opening the blades, then repeats in that order. Use it for whatever you want, credit if you feel like it :).

Create dĩa bay sound from derjuli’s «circular-saw" sound. Audacity:. - cut from 3. 561s to 4. 818s. - copy. - create→add new→stereo track. - paste in new track. - effect→change speedspeed multiplier: 1. 8. - copy and paste again after. - effect→reverse (only reverse copy after). - select all. - effect→repeatnumber of repeats to add: 10.

Chirp sound, 250hz - 800hz square waveform. Linear interpolation. Wet reverbed and compressed to 3:1 ratio. Equalized with riaa wave curve (top-left to bottom-right). Each chirp lasts 3. 750s. Repeats 4 times layered over itself, including the last chirp without any layered sounds on it.

Create alarm/klaxon 1 sound from brainclaim's "saw-cutting" sound. Use audacity:• cut from 3. 678s to 4. 696 (end). • select from 2. 023s to 3. 678 (end). - effect→adjustable fadefade type: fade upmid-fade adjust (%): 0. 0start/end as: % of originalstart (or end) 100start (or end) 100handy presets (override controls): exponential out. - effect→repeatnumber of repeats to add: 25. Tiếng báo động.

Wrote/recorded a beat song with mixed synth and percussive elements at 60 bpm in the ableton session. Notes:d#1 f1 d#1 d#2 g1 c2 d2 d#1 f1 d#1 d#2 g1 c2 d2 d#1 f1 d#1 d#2 g1 c2 d2 (then it repeats). Additional notes:-12. 2 lufs integrated-0. 2 db true peak max. Hope this helps and is useful for your next project. Cheers,bainmackyoutube. Com/bainmack.

This is reminiscent of the sound playing in friday the 13th pt. 2 when jenny puts on pamela vorhees old sweater and pretends to be her in an attempt to trick jason. One of the lines she repeats during the scene is "jason, mother is talking to you", hence the file name. This was made in fl studio using morphine. Its got a very eerie sound to it thats for sure. Use it in you horror score or for whatever you like.

Made for the ice-breaker collab. Simple mournful loop with deep kick, flute and strings. Tempo=90 bpm. An arpegiated supersaw over drone effect (wollo drone) repeats 3 times. First iteration includes a melody played as a flute. Second iteration of the loop has the flute replaced with a full string section. Third time around, it's just the arp and drone. All three versions of the loop have a deep, reverberating and mellow kickdrum. Sounds tribal(-ish). Created in flstudio 11. 04 with virtual instruments and vst eq + reverb.

I live on a lake and this is what my back patio sounds like every night. They live in the branches of the weeping willow trees that dip down to the water. The sound starts with one frog, then a few join in, and soon there as a chorus of them on all ends of the lake in all tempos going at once. Then when a crescendo is reached, they all start to stop one by one until it's silent again. But the silence only lasts for minute, and then the cycle repeats. I don't know if it's some huge frog mating ritual, or family reunion.

This is a percussion beats made at tempo 124. It spans 8 bars and is ready to be looped in your daw. This is a sound i've found in my old foxdot projects, it has a really cool "ocean" or "wave" noise-like sound that repeats at the right then left of stereo, in the end of each 4-bar segement. It layers multiple kicks and snares, with one of the sounds being stretched, that produce this "wave" sound. It can be evaluated in foxdot with the following code to replicate this result. D1 >> play(p[" [--]o h: -"]. Layer("mirror"),dur=pdur(5,8), rate=expvar([0. 09,2],8),sample=2, pan=sinvar([-1,1],16),amplify=0. 5).

Me (a man) teasing my wife by going down on her, bringing her to near orgasm, stopping and fucking her. This repeats as she gets closer and louder. The sex becomes rougher and there is some choking later in the recording. I think this recording was made in 2016 using a zoom h6 and a rode ntg4 mic or possibly the x/y capsule that comes with the recorder. Note on the recording: there seem to be some silences at a couple of points. Something probably happened in the rendering. I probably won't do anything to fix this as it's just a few seconds out of 18 minutes of audio.

The sound of an ice maker on a water cooler doing a few cycles. My amazing aunt harriet amazes again by sending me this sound of her ice maker. She taped her old iphone to the inside of the door on her new water cooler/ice maker combo, and let the ice maker run for a few cycles. She even typed up a description of what it does for me so i could post this here on freesound:the water is pumped from a reservoir underneeth the ice tray into a tray above that houses 9 pegs. The water is then cooled to freezing, while the 9 pegs are simultaneously cooled to hold the ice in place. More water is then pumped into the tray to thicken each piece of ice. After a few minutes, excess water is dumped back into the reservoir and ice falls from the pegs into the ice tray. The process then repeats. Enjoy and use however you like!.

A very peaceful, melancholy soundscape i recorded on labor day weekend in some woods, about 20 feet from a popular lake in the midwest. There was a small cove in between my setup and several campers across the way. . . They undoubtedly were enjoying one last time with nature starting to change from summer to autumn. The main sound is that of insects, not sure what the species is, but, they have a beautiful, drowsy "tick-tick-tick" sound that repeats. . . To me, this sound signals the very subtle, almost imperceptible march towards the autumn equinox. I swear, the longer you listen to this captivating insect, you're drawn into, almost like a hypnosis state of reflection. . . A couple things to listen for:(1) around 1:13 a very low splash. (2) at 1:38 a lone goose honks. (3) starting at 2:30 some very low volume, muted camper conversations. (4) at 2:36 a louder splash. (5) 2:41 more beautiful, un-hurried muted camper conversations. No doubt talking about how they need to break camp and return to the real world, but the "tick-tick-tick" of the insects have a strong hold on them. No, stay a little while longer; have another cup of coffee, talk about your accomplishments over the past summer,. This was recorded around 10am on sunday morning, september 6th, 2020 in illinois. Mixpre-6 audio recorder and the sennheiser mkh 416 microphone. Enjoy this audio snap-shot of the natural world winding down summer!.

While working on another audiobook, i decided to make this sound. It's 38 voices, each saying different things, panned around and mixed together, creating a "wall of sound" that speaks like 38 radio channels at once. Recorded with a zoom h2 via usb into ardour2. Mixed and exported to flac with ardour2. Ps: it's all polish (with some possible german shout-outs), but the amount of noise makes it almost completely incomprehensible. Only a few words that are being yelled in a different voice can be understood. No sound repeats here, no recycling - every voice and every second of this recording is unique. Yes, it required quite a lot of work to record so much talking in quality! it's almost an entire audiobook squeezed into 5 minutes. Strangely (or not) listening to this makes my mind rest, because the noise blocks all other sounds from the environment - making my mind free of stimulation, allowing for sleep-like rest state. The signal is so much modulated that it appears to be not modulated at all - like static you get from a fm radio of you tune it wrong. The brain receives less data when you listen to this, than when you sit in a room hearing even faint (but distinct) noises from outside, other rooms, other people or yourself. This is sound masking in action. A very interesting psychoacoustic property of human hearing. Also: this is an interesting material to study of my voice's spectral energy distribution while speaking (as opposed to singing). As you can see using the spectrogram view, most energy is present in the band below 600 hz.

This is a recording of myself sleeping, beginning ~ 1:00 am local time (~ 3hrs after going to bed) on january 10th, 2020 (which i later discovered was a full moon). I was in the midst of experimenting with recording myself all night long out of curiosity, using a laptop placed near the head of my bed. This particular recording was the only anomalous one (the rest consisting mostly of just breathing or snoring with occasional sleep-talking). This ~2 hour recording has several interesting properties, which make it hard for me to believe that these sounds were actually going on while i was sleeping. On the other hand, i don't have a memory of editing this file if i did. Either way, i find it unsettling. I found the file in oct 2021 while organizing my samples. As far as i can remember, this is the original raw recording. On further inspection, i discovered that it has some additional peculiar properties that make it even harder to believe i could have made it without remembering doing so. The audio spans almost exactly 118min (7080s). There’s a frequency sweep with a cycle-length of 6480ms that repeats throughout the entire recording. Dividing the 118min by 6. 48min (60 cycles) results in 18 parts containing exactly 60 cycles and a remainder of 12 cycles. If you think you know the source of the strange sounds or if you've ever heard anything similar, please let me know in the comments or email me at storyofthelie@protonmail. Com. I collected the most interesting bits into this pack:https://freesound. Org/people/storyofthelie/packs/33653/. Approximate times of weird stuff:. 25min - stretched cough41min - voice & sounds45min - metal hit & voice47min - call response55min - door latch1hr 3min - portal1hr 7min - more portal1hr 11min - open portal1hr 20min - echo voice1hr 23min - echo voice, tones, portal1hr 36min - stomp into breathing1hr 51min - echo voice1hr 53min - cycle tone change into crazy.

This is the audible annunciation found at all intersections with traffic lights in paris, france. It announces the condition of the traffic lights for pedestrians who are blind or with impaired vision. The annunciation is turned on by pressing a button on the traffic light pole. When the crosswalk sign is red (do not cross), the recorded annunciation is always "rouge piéton" ("red light, pedestrian"), followed by the name of the street that the crosswalk crosses (in this case "rue d'antin," the quiet side street where i recorded this). This repeats over and over until the crosswalk changes to green, at which point there is a two-second trill tone followed by a repeating bell tone. The bell tone is one bell, followed by two bells, repeated four times, followed by a very brief pause, and then the sequence is repeated again. This continues until the crosswalk changes back to red, at which point the "rouge piéton" message resumes. The annunciation continues for at least one cycle of the traffic lights and then stops, unless the button is pressed again. The audio quality of the annunciation is very poor even in real life (it sounds like a wax cylinder recording or something), and can be difficult to understand. This recording accurately captures the poor quality of the annunciation. The volume of the annunciation is also adjusted dynamically based on ambient noise, so there is a slight change in volume on this recording as the system apparently reacts to noise from traffic or something. There is a weak background noise that sounds like some sort of machine, but it wasn't coming from the traffic light and i don't know the source. The recording starts with the crosswalk red, then at about 18. 3 seconds it changes to green, then it changes back to red at about 53 seconds. A car passes at around 48 seconds. Recorded with a zoom h4n, stereo 96 khz / 24 bits, built-in mics, from about ten inches below the tiny speaker in the crosswalk sign housing.